S71GL064NB0BHW0P0

S71GL064NB0BHW0P0 Datasheet


S71GL-N Based MCPs

Part Datasheet
S71GL064NB0BHW0P0 S71GL064NB0BHW0P0 S71GL064NB0BHW0P0 (pdf)
PDF Datasheet Preview
S71GL-N Based MCPs

Stacked Multi-Chip Product MCP Flash Memory and RAM
64/32 Megabit 4/2M x 16-bit CMOS Volt-Only Page Mode Flash Memory and 32/16 Megabit 2M/1M x 16-bit Pseudo Static RAM

Data Sheet Advance Information

S71GL-N Based MCPs Cover Sheet

Notice to Readers This document states the current technical specifications regarding the Spansion product s described herein. Each product described herein may be designated as Advance Information, Preliminary, or Full Production. See Notice On Data Sheet Designations for definitions.

Publication Number S71GL-N_00

Issue Date May 6, 2013

Data Sheet Advance Information

Notice On Data Sheet Designations

Spansion Inc. issues data sheets with Advance Information or Preliminary designations to advise readers of product information or intended specifications throughout the product life cycle, including development, qualification, initial production, and full production. In all cases, however, readers are encouraged to verify that they have the latest information before finalizing their design. The following descriptions of Spansion data sheet designations are presented here to highlight their presence and definitions.

Advance Information The Advance Information designation indicates that Spansion Inc. is developing one or more specific products, but has not committed any design to production. Information presented in a document with this designation is likely to change, and in some cases, development on the product may discontinue. Spansion Inc. therefore places the following conditions upon Advance Information content:
“This document contains information on one or more products under development at Spansion Inc. The information is intended to help you evaluate this product. Do not design in this product without contacting the factory. Spansion Inc. reserves the right to change or discontinue work on this proposed product without notice.”

Preliminary The Preliminary designation indicates that the product development has progressed such that a commitment to production has taken place. This designation covers several aspects of the product life cycle, including product qualification, initial production, and the subsequent phases in the manufacturing process that occur before full production is achieved. Changes to the technical specifications presented in a Preliminary document should be expected while keeping these aspects of production under consideration. Spansion places the following conditions upon Preliminary content:
Combination Some data sheets contain a combination of products with different designations Advance Information, Preliminary, or Full Production . This type of document distinguishes these products and their designations wherever necessary, typically on the first page, the ordering information page, and pages with the DC Characteristics table and the AC Erase and Program table in the table notes . The disclaimer on the first page refers the reader to the notice on this page.
Full Production No Designation on Document When a product has been in production for a period of time such that no changes or only nominal changes are expected, the Preliminary designation is removed from the data sheet. Nominal changes may include those affecting the number of ordering part numbers available, such as the addition or deletion of a speed option, temperature range, package type, or VIO range. Changes may also include those needed to clarify a description or to correct a typographical error or incorrect specification. Spansion Inc. applies the following conditions to documents in this category:
“This document states the current technical specifications regarding the Spansion product s described herein. Spansion Inc. deems the products to have been in sufficient production volume such that subsequent versions of this document are not expected to change. However, typographical or specification corrections, or modifications to the valid combinations offered may occur.”

Questions regarding these document designations may be directed to your local sales office.

S71GL-N Based MCPs

S71GL-N_00_08 May 6, 2013

S71GL-N Based MCPs

Stacked Multi-Chip Product MCP Flash Memory and RAM
64/32 Megabit 4/2M x 16-bit CMOS Volt-Only Page Mode Flash Memory and 32/16 Megabit 2M/1M x 16-bit Pseudo Static RAM

Data Sheet Advance Information

Distinctive Characteristics

MCP Features

Power Supply Voltage of 2.7V to 3.3V High Performance
90 ns access time 90 ns Flash, 70 ns pSRAM/SRAM 25 ns page read times

Packages 7 x 9 x mm 56 ball FBGA

Operating Temperature to +85°C

The S71GL-N product series consists of S29GL-N Flash memory with pSRAM combinations defined as:
pSRAM Density
16 Mb 32 Mb

Flash Memory Density
32 Mb
64 Mb

S71GL032NA0

S71GL064NB0

For detailed specifications, please refer to the individual data sheets.

Document S29GL-N SPH016D970R1R 16 Mb pSRAM Type 9 SPH032D970R1R 32 Mb pSRAM Type 9

Publication Identification Number PID S29GL-N_00

SPH016D970R1R SPH032D970R1R

Publication Number S71GL-N_00

Issue Date May 6, 2013

This document contains information on one or more products under development at Spansion Inc. The information is intended to help you evaluate this product. Do not design in this product without contacting the factory. Spansion Inc. reserves the right to change or discontinue work on this proposed product without notice.

Data Sheet Advance Information

Product Selector Guide

Device-Model# Note
p SRAM density

S71GL032NA0-0K S71GL032NA0-0P
16 Mb

S71GL064NB0-0K S71GL064NB0-0P
32 Mb

Note Please see the valid combinations table for the model# description.
p SRAM type
pSRAM 9 pSRAM 9
Ordering Information

The order number is formed by a valid combinations of the following:

S71GL
064 N B0 BF

P0 PACKING TYPE 0 = Tray 2 = 7” Tape and Reel 3 = 13” Tape and Reel

MODEL NUMBER See the Valid Combinations table

PACKAGE MODIFIER 0 = 9 x 7 mm, mm height, 56 balls

TEMPERATURE RANGE W = Wireless -25°C to +85°C

PACKAGE TYPE BF = Fine-pitch BGA Lead Pb -free package BH = Fine-pitch BGA Lead PB -free, Low-Halogen package
pSRAM / SRAM DENSITY B0 = 32 Mb pSRAM A0 = 16 Mb pSRAM

PROCESS TECHNOLOGY N = 110 nm, Technology

FLASH DENSITY 064 = 64 Mb 032 = 32 Mb

PRODUCT FAMILY S71GL Multi-chip Product MCP 3.0-volt Page Mode Flash Memory and RAM

Valid Combinations Valid Combinations list configurations planned to be supported in volume for this device. Consult your local sales office to confirm availability of specific valid combinations and to check on newly released combinations.

Table Valid Combinations
Base Ordering Part Number

S71GL032NA0

S71GL064NB0

S71GL064N Valid Combinations

Package & Package Modifier/Model

Temperature

Number

BHW 0P
0K BFW, BHW

Note Type 0 is standard. Specify other options as required.

Packing Type 0, 2, 3 1

Speed Options ns /Boot Sector Option
90 / Bottom Boot Sector 90 / Top Boot Sector
90 / Bottom Boot Sector 90 / Top Boot Sector
p SRAM Type/ Access Time
pSRAM 9 / 70

Package Marking

TLC056

May 6, 2013 S71GL-N_00_08

S71GL-N Based MCPs

Data Sheet Advance Information

Fine-Pitch Ball Grid Array FBGA 9 x 7 mm Package

PIN A1 CORNER

INDEX MARK 10

TOP VIEW

H G F E DCB A

BOTTOM VIEW

SE 7 E1

PIN A1 CORNER

SIDE VIEW
56X b

M C A B M C

PACKAGE JEDEC

TLC 056 N/A

SYMBOL A A1 A2 D E D1 E1 MD ME n eE eD

SD / SE
mm x mm PACKAGE

BSC.

BSC.

BSC.

BSC.
Ordering Information

Product Selector Guide
Ordering Information Physical Dimensions

Global General Description

Global

Global

Global

Initial release

Editorial changes to valid combinations table

Added Low-Halogen option to package type

Added pSRAM Type 8, 90 nm Added pSRAM Type 8, 90 nm Changed S71GL064Nxx-xx package to TSC056 Changed S71GL064Nxx-xx package to TSC056 Added TSC056

Added OPNs S71GL032NA0BHW0B/0F and S71GL064NA0BHW0B/0F Added pSRAM Type 10

Updated Table with current pSRAM offerings Removed pSRAM Type 7 MCPs Added 32 Mb and 64 Mb pSRAM Type 9 MCPs

Removed 4 Mb and 8 Mb pSRAM Updated Document and Publication Identification Number descriptions

Changed VCC Range to 2.7-3.3V Removed pSRAM Type 8 and Type 10 Corrected Package to TLC056 for S71GL064Nxx

May 6, 2013 S71GL-N_00_08

S71GL-N Based MCPs

Data Sheet Advance Information

Colophon

The products described in this document are designed, developed and manufactured as contemplated for general use, including without limitation, ordinary industrial use, general office use, personal use, and household use, but are not designed, developed and manufactured as contemplated 1 for any use that includes fatal risks or dangers that, unless extremely high safety is secured, could have a serious effect to the public, and could lead directly to death, personal injury, severe physical damage or other loss i.e., nuclear reaction control in nuclear facility, aircraft flight control, air traffic control, mass transport control, medical life support system, missile launch control in weapon system , or 2 for any use where chance of failure is intolerable i.e., submersible repeater and artificial satellite . Please note that Spansion will not be liable to you and/or any third party for any claims or damages arising in connection with above-mentioned uses of the products. Any semiconductor devices have an inherent chance of failure. You must protect against injury, damage or loss from such failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of over-current levels and other abnormal operating conditions. If any products described in this document represent goods or technologies subject to certain restrictions on export under the Foreign Exchange and Foreign Trade Law of Japan, the US Export Administration Regulations or the applicable laws of any other country, the prior authorization by the respective government entity will be required for export of those products.

Trademarks and Notice

The contents of this document are subject to change without notice. This document may contain information on a Spansion product under development by Spansion. Spansion reserves the right to change or discontinue work on any product without notice. The information in this document is provided as is without warranty or guarantee of any kind as to its accuracy, completeness, operability, fitness for particular purpose, merchantability, non-infringement of third-party rights, or any other warranty, express, implied, or statutory. Spansion assumes no liability for any damages of any kind arising out of the use of the information in this document. Copyright 2007-2013 Spansion Inc. All rights reserved. the Spansion logo, Eclipse , ORNAND and combinations thereof, are trademarks and registered trademarks of Spansion LLC in the United States and other countries. Other names used are for informational purposes only and may be trademarks of their respective owners.

S71GL-N Based MCPs

S71GL-N_00_08 May 6, 2013
More datasheets: X101BKN | 1DC103K-EC | ADP1196ACBZ-R7 | 2058 | CDBFR54 | MMST2222A-7 | JD2D2-CDN-A | 4312V | CY7C245A-18WMB | 2909


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived S71GL064NB0BHW0P0 Datasheet file may be downloaded here without warranties.

Datasheet ID: S71GL064NB0BHW0P0 508323