ADP1196
Part | Datasheet |
---|---|
![]() |
ADP1196ACBZ-R7 (pdf) |
PDF Datasheet Preview |
---|
Data Sheet 5 V, 3 A Logic Controlled High-Side or Low-Side Load Switch ADP1196 Low RDSON of 10 mΩ in 6-ball WLCSP Wide input voltage range 0 V to V 3 A continuous operating current at 70°C Bias supply voltage range V to V Low 26 µA ground quiescent current, VIN V Low 50 µA quiescent current, VIN = V Overtemperature protection circuitry Low shutdown current µA Ultrasmall mm x mm, 6-ball, mm pitch WLCSP Medical and healthcare Instrumentation The ADP1196 is a high-side or low-side load switch designed for VIN operation between 0 V and V with a VB_EN supply of V to V. The device contains an internal charge pump that operates from either VIN or VB_EN, whichever is higher, and an ultralow on resistance, N-channel MOSFET. This N-channel MOSFET supports more than 2 A of continuous current at VIN close to 0 V, and, with its ultralow on resistance, minimizes power loss. In addition, the on resistance is constant, independent of the VIN or VB_EN voltage. The low 26 µA quiescent current and ultralow shutdown current make the ADP1196 ideal for low power applications. TYPICAL APPLICATIONS CIRCUITS VOUT VOUT ADP1196 VB_EN LOAD Figure Low-Side Load Application 11260-001 VOUT VOUT LOAD ADP1196 VB_EN Figure High-Side Load Application 11260-002 When the junction temperature exceeds 125°C, overtemperature protection circuitry is activated, thereby protecting the ADP1196 and downstream circuits from potential damage. The ADP1196 occupies minimal printed circuit board PCB space, with an area of less than mm2 and a height of mm. The ADP1196 is available in an ultrasmall mm x mm, 6-ball, mm pitch WLCSP. Document Feedback Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 2013 Analog Devices, Inc. All rights reserved. Technical Support ADP1196 TABLE OF CONTENTS Timing Diagram 3 Absolute Maximum 4 Thermal Resistance 4 ESD 4 Pin Configuration and Function 5 0 Initial Version Data Sheet Typical Performance Characteristics Theory of Operation Applications Information 10 Capacitor Selection 10 Ground 10 Enable Feature 10 Timing 11 Current-Limit and Thermal Overload Protection................. 11 Outline Dimensions 12 Ordering Guide 12 Data Sheet ADP1196 SPECIFICATIONS VIN = V, VVB_EN = V, IOUT = 1 A, TA = 25°C, TJ = −40°C to +85°C for minimum/maximum specifications, unless otherwise noted. Table Parameter INPUT VOLTAGE RANGE BIAS SUPPLY VOLTAGE RANGE ENABLE VB_EN Input VB_EN Pull-Down Resistor CURRENT Ground Quiescent Current Shutdown Current Continuous Operating Current1 VIN TO VOUT RESISTANCE VOUT TURN-ON DELAY TIME Turn-On Delay Time THERMAL SHUTDOWN Thermal Shutdown Threshold Thermal Shutdown Hysteresis Symbol VIN VVB_EN VIH VIL VIH VIL IEN IGND IOFF IOUT RDSON tON_DLY TSSD-HYS Test Conditions/Comments VIN < V VIN < V VIN = V to V VIN = V to V VVB_EN = 400 mV VIN = V, V < VVB_EN < V or VVB_EN = V, VIN = V VIN = V, V < VVB_EN < V or VVB_EN = V, VIN = V VIN = V, V < VVB_EN < V or VVB_EN = V, VIN = V VIN = V, V < VVB_EN < V or VVB_EN = V, VIN = V VVB_EN = GND, VOUT = 0 V, VIN = V VVB_EN = GND, VOUT = 0 V, VIN = V to V VIN = V to V, VVB_EN > V or VVB_EN = V to V, VIN = V to VVB_EN VIN = V, VVB_EN > V or VVB_EN = V, VIN = V VIN = V, VVB_EN > V or VVB_EN = V, VIN = V VIN = V, VVB_EN > V or VVB_EN = V, VIN = V See Figure 3 VIN = V to V, VVB_EN > V, CLOAD = 1 uF TJ rising Min Typ 0 26 35 50 125 15 Max Unit V V MΩ 50 uA 50 uA 68 uA uA 40 uA Ω Ω Ω °C °C 1 At an ambient temperature of 85°C, the part can withstand a continuous current of A. At a load current of 3 A, the operational lifetime derates to 2190 hours. TIMING DIAGRAM TURN-ON DELAY 10% TURN-ON RISE TIME VVB_EN VOUT TURN-OFF DELAY TURN-OFF FALL TIME Figure Timing Diagram 11260-004 ADP1196 ABSOLUTE MAXIMUM RATINGS ORDERING GUIDE Model1 Temperature Range ADP1196ACBZ-R7 −40°C to +85°C Package Description 6-Ball Wafer Level Chip Scale Package [WLCSP] 1 Z = RoHS Compliant Part. 11-08-2012-B Data Sheet Package Option CB-6-2 Branding BW 2013 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. D11260-0-6/13 0 |
More datasheets: CCM05-5773 | CCM05-5777LFT T50 | CCM05-5773LFT T50 | 67 | 6002-592-000 | FMB857B | FJY3006R | 17000538A | X101BKN | 1DC103K-EC |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ADP1196ACBZ-R7 Datasheet file may be downloaded here without warranties.