MB95F354LWQN-G-SNE1

MB95F354LWQN-G-SNE1 Datasheet


MB95F352E/F352L/F353E/F353L/F354E/F354L

Part Datasheet
MB95F354LWQN-G-SNE1 MB95F354LWQN-G-SNE1 MB95F354LWQN-G-SNE1 (pdf)
Related Parts Information
MB95F354LPFT-G-SNE2 MB95F354LPFT-G-SNE2 MB95F354LPFT-G-SNE2
MB95F354EPFT-G-SNE2 MB95F354EPFT-G-SNE2 MB95F354EPFT-G-SNE2
MB95F353EPFT-G-SNE2 MB95F353EPFT-G-SNE2 MB95F353EPFT-G-SNE2
MB95F354EWQN-G-SNE1 MB95F354EWQN-G-SNE1 MB95F354EWQN-G-SNE1
PDF Datasheet Preview
MB95F352E/F352L/F353E/F353L/F354E/F354L

CMOS F2MC-8FX MB95350L Series 8-bit Microcontrollers

MB95350L is a series of general-purpose, single-chip microcontrollers. In addition to a compact instruction set, the microcontrollers of this series contain a variety of peripheral resources.

F2MC-8FX CPU core

Instruction set optimized for controllers
• Multiplication and division instructions
• 16-bit arithmetic operations
• Bit test branch instructions
• Bit manipulation instructions, etc.

Clock
• Selectable main clock source Main OSC clock up to MHz, maximum machine clock frequency MHz External clock up to MHz, maximum machine clock frequency MHz Main CR clock MHz 2%, maximum machine clock frequency MHz
• Selectable subclock source Sub-OSC clock kHz External clock kHz Sub-CR clock Typ 100 kHz, Min 50 kHz, Max 200 kHz

Timer
• 8/16-bit composite timer 2 channels
• Time-base timer 1 channel
• Watch prescaler 1 channel

UART/SIO 1 channel The channel can be used either as a UART/SIO channel or as an I2C channel.
• Alternative selection of UART/SIO
• Full duplex double buffer
• Capable of clock-asynchronous UART serial data transfer
and clock-synchronous SIO serial data transfer

I2C 2 channels One of the two channels can be used either as an I2C channel or as a UART/SIO channel.
• Supports Standard-mode and Fast-mode 400 kHz
• Built-in wake-up function

LIN-UART
• Full duplex double buffer
• Capable of clock-synchronous serial data transfer and
clock-asynchronous serial data transfer

External interrupt 6 channels
• Interrupt by edge detection rising edge, falling edge, and both edges can be selected
• Can be used to wake up the device from different low power consumption standby modes
8/10-bit A/D converter 6 channels
• 8-bit and 10-bit resolution can be chosen.

Low power consumption standby modes
• Stop mode
• Sleep mode
• Watch mode
• Time-base timer mode

I/O port
• MB95F352L/F353L/F354L maximum no. of I/O ports 21 General-purpose I/O ports N-ch open drain 3 General-purpose I/O ports CMOS I/O 18
• MB95F352E/F353E/F354E maximum no. of I/O ports 22 General-purpose I/O ports N-ch open drain 3 General-purpose I/O ports CMOS I/O 18 General-purpose input port CMOS input 1

On-chip debug
• 1-wire serial control
• Serial writing supported asynchronous mode

Hardware/software watchdog timer
• Built-in hardware watchdog timer
• Built-in software watchdog timer

Low-voltage detection reset and interrupt circuit
• Built-in low-voltage detector

Clock supervisor counter
• Built-in clock supervisor counter function
• San Jose, CA 95134-1709
• 408-943-2600

Programmable port input voltage level
• CMOS input level / hysteresis input level

MB95350L Series

Dual operation Flash memory
Clock Timing 29 Source Clock/Machine Clock 31 External Reset 34 Power-on Reset 35 Peripheral Input Timing 36 LIN-UART Timing 37 Low-voltage Detection 43 I2C Timing 45 UART/SIO, Serial I/O Timing 48 A/D Converter 50 A/D Converter Electrical Characteristics 50 Notes on Using the A/D Converter 51 Definitions of A/D Converter Terms 52 Flash Memory Write/Erase Characteristics 54 Sample Characteristics 55 Mask Options 61 Ordering Information 62 Package Dimension 63 Major Changes 66

Page 3 of 70

MB95350L Series

Product Line-up

MB95F352E MB95F353E MB95F354E MB95F352L MB95F353L

Parameter

Type

Flash memory product

Clock supervisor counter

It supervises the main clock oscillation.

Program ROM capacity
8 Kbyte
12 Kbyte
20 Kbyte
8 Kbyte
12 Kbyte

RAM capacity
240 bytes
496 bytes
496 bytes
240 bytes
496 bytes

Low-voltage detection reset

Reset input

Selected through software

Dedicated

CPU functions

Number of basic instructions Instruction bit length Instruction length Data bit length Minimum instruction execution time Interrupt processing time
136 8 bits 1 to 3 bytes 1, 8 and 16 bits ns with machine clock = MHz µs with machine clock = MHz

General-purpose I/O

I/O ports Max 22 CMOS I/O 18 N-ch open drain 3 CMOS input 1

I/O ports Max 21 CMOS I/O 18 N-ch open drain 3

Time-base timer Interrupt cycle ms to s when external clock = 4 MHz

Hardware/software watchdog timer

Reset generation cycle - Main oscillation clock at 10 MHz 105 ms Min

The sub-CR clock can be used as the source clock of the hardware watchdog timer.

Wild register

It can be used to replace three bytes of data.

LIN-UART

A wide range of communication speeds can be selected by a dedicated reload timer. Clock-synchronous serial data transfer and clock-asynchronous serial data transfer is enabled. The LIN function can be used as a LIN master or a LIN slave.
8/10-bit A/D converter
Ordering Information

MB95F352EPF-G-SNE2 MB95F352LPF-G-SNE2 MB95F353EPF-G-SNE2 MB95F353LPF-G-SNE2 MB95F354EPF-G-SNE2 MB95F354LPF-G-SNE2

MB95F352EPFT-G-SNE2 MB95F352LPFT-G-SNE2 MB95F353EPFT-G-SNE2 MB95F353LPFT-G-SNE2 MB95F354EPFT-G-SNE2 MB95F354LPFT-G-SNE2

MB95F352EWQN-G-SNE1 MB95F352EWQN-G-SNERE1 MB95F352LWQN-G-SNE1 MB95F352LWQN-G-SNERE1 MB95F353EWQN-G-SNE1 MB95F353EWQN-G-SNERE1 MB95F353LWQN-G-SNE1 MB95F353LWQN-G-SNERE1 MB95F354EWQN-G-SNE1 MB95F354EWQN-G-SNERE1 MB95F354LWQN-G-SNE1 MB95F354LWQN-G-SNERE1

MB95350L Series

Package 24-pin plastic SOP

FPT-24P-M34
24-pin plastic TSSOP FPT-24P-M10
32-pin plastic QFN LCC-32P-M19

Page 63 of 70

MB95350L Series

Package Dimension
24-pin plastic SOP

FPT-24P-M34
24-pin plastic SOP FPT-24P-M34

Lead pitch Package width x package length

Lead shape Lead bend direction Sealing method

Mounting height

Weight
mm x mm

Gullwing Normal bend Plastic mold mm MAX

Note 1 * These dimensions do not include resin protrusion.

INDEX

DEP0.20

DEP.008

Details of "A" part
"A" 0~8°

C 2009-2010 FUJITSU SEMICONDUCTOR LIMITED F24034S-c-1-2

Dimensions in mm inches . Note The values in parentheses are reference values.

Continued

Page 64 of 70

MB95350L Series
24-pin plastic TSSOP

FPT-24P-M10
24-pin plastic TSSOP FPT-24P-M10

Lead pitch Package width x package length

Lead shape

Sealing method

Mounting height

Weight
mm x mm
Sample Characteristics Ordering Information

MB95350L Series

Details

Changed the Typ value of ICCMCR. 11 9

Changed the Typ value of ICCSCR. 110 77

Changed the Typ value of ICCTS.

Changed the Typ value of ICCH. 1 Changed the Typ value of ILVD. 8

Changed the Typ value of ICRH.

Added the following note *3 VCC = V, TA = Deleted all information about the HCLK1 pin and the HCLK2 pin in the table. Deleted HCLK1 and HCLK2 in the “• Input waveform generated when an external clock main clock is used”.

Deleted the external connection diagram for the HCLK1 pin and HCLK2 pin in “• Figure of main clock input port external connection”. Deleted the following parameters Power hysteresis width 0, Power hysteresis width 1, Power hysteresis width 2, Interrupt hysteresis width 0, Interrupt hysteresis width 1, Interrupt hysteresis width 2, Interrupt hysteresis width 3, Interrupt hysteresis width 4 Deleted VPHYS/VIHYS from the diagram. Added diagrams showing sample characteristics. Added the following part numbers for the 32-pin plastic QFN package LCC-32P-M19 MB95F352EWQN-G-SNE1 MB95F352LWQN-G-SNE1 MB95F353EWQN-G-SNE1 MB95F353LWQN-G-SNE1 MB95F354EWQN-G-SNE1 MB95F354LWQN-G-SNE1

Page 68 of 70

MB95350L Series

Document History

Document Title MB95F352E/F352L/F353E/F353L/F354E/F354L CMOS F2MC-8FX MB95350L Series 8-bit Microcontrollers Document Number 002-07527

Orig. of Change

AKIH

Submission Date
04/13/2010

Description of Change

Migrated to Cypress and assigned document number No change to document contents or format.
5183750

AKIH
03/31/2016 Updated to Cypress template

Page 69 of 70

MB95350L Series

Sales, Solutions, and Legal Information

Worldwide Sales and Design Support

Cypress maintains a worldwide network of offices, solution centers, manufacturer’s representatives, and distributors. To find the office closest to you, visit us at Cypress Locations.

Products Microcontrollers
cypress.com/arm

Solutions cypress.com/psoc

Automotive
cypress.com/automotive

PSoC 1 | PSoC 3 | PSoC 4 | PSoC 5LP

Clocks & Buffers Interface Lighting & Power Control Memory PSoC
cypress.com/clocks cypress.com/interface cypress.com/powerpsoc cypress.com/memory
cypress.com/psoc

Cypress Developer Community | Forums | Blogs | Video | Training

Technical Support cypress.com/support

Touch Sensing
cypress.com/touch
More datasheets: FS1-R38-20A2-00 | FS1-R38-20A2-11 | RI-80SMD0515-J | RI-80SMD0515-G2 | RI-80SMD0515-G1 | A-SATA/7-F-AO-A-02-01-R | MB95F354LPFT-G-SNE2 | MB95F354EPFT-G-SNE2 | MB95F353EPFT-G-SNE2 | MB95F354EWQN-G-SNE1


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MB95F354LWQN-G-SNE1 Datasheet file may be downloaded here without warranties.

Datasheet ID: MB95F354LWQN-G-SNE1 508305