RI-80SMD0515-J

RI-80SMD0515-J Datasheet

RI-80 SMD Series Dry Reed Switch

Part	Datasheet
RI-80SMD0515-J	RI-80SMD0515-J (pdf)

Related Parts	Information
RI-80SMD0515-G2	RI-80SMD0515-G2
RI-80SMD0515-G1	RI-80SMD0515-G1

PDF Datasheet Preview
RI-80 SMD Series Dry Reed Switch RI-80 SMD Series Ultra-micro dry-reed switch hermetically sealed in a gas-filled glass envelope. Single-pole, single-throw SPST type, having normally open contacts, and containing two magnetically actuated reeds. The switch is of the double-ended type and may be actuated by an electromagnet, a permanent magnet or a combination of both. RI-80 SMD Series Features Ideal for proximity sensors, telecom & medical applications World’s smallest high quality reed switch Contact layers Gold, sputtered ruthenium Superior glass-to-metal seal and blade alignment Dimensions in inches mm RI-80 SMD G1 Model RI-80 SMD G2 Model RI-80 SMD J-Lead Model General data for RI-80 SMD AT-Customization The RI-80 SMD can be supplied in operate ranges to customer specification. Loaded conditions Resistive load 5V 100 mA operating frequency 170 Hz Life expectancy min. 107 operations with a failure rate of less than 10-8 with a confidence level of Coils All characteristics are based on unmodified switches. The switches are defined using the Philips Standard End of life criteria Contact resistance > after 4 ms Release time > ms latching or contact sticking Coil. For more information, see Reed Switch Technical & Application Information Section of this catalog. Switching different loads involves different life expectancy and reliability data. Further information available Life expectancy and reliability upon request. The life expectancy data given below are valid for a coil energized at times the published maximum operate value for each type in the RI-80 series. Mechanical Data Contact arrangement is normally open lead finish is tinned and can be mounted in any position. No-load conditions operating frequency 100 Hz Life expectancy min. 108 operations with a failure rate of less than 2 x10-9 with a confidence level of Shock The switches are tested in accordance with “IEC 68-2-27”, test Ea peak acceleration 150 G, half End of life criteria Contact resistance > after 2 ms Release time > 2ms latching or contact sticking . sinewave duration 11 ms . Such a shock will not cause an open switch no magnetic field present to close nor a switch kept closed by an 80 AT coil to open. 88 COTO TECHNOLOGY USA Tel 401 943-2686 / Fax 401 942-0920 6 Europe Tel +31-45-5439343 / Fax +31-45-5427216 RI-80 SMD Series Dry Reed Switch Model Number Parameters Operating Characteristics Operate Range Release Range Operate Time - including bounce typ. Bounce Time typ. Release Time max Resonant Frequency typ. Electrical Characteristics Switched Power max Switched Voltage DC max Switched Voltage AC, RMS value max Switched Current DC max Switched Current AC, RMS value max Carry Current DC AC, RMS value max Breakdown Voltage min Contact Resistance initial max Contact Resistance initial typ. Contact Capacitance max Insulation Resistance min Test Conditions energization energization without test coil RH 45% Units AT ms µs Hz W V mA A V pF RI-80 SMD 5-15 2-13 20 AT 20 AT 20 AT 5 175* 140 350 250 230 160 20 AT 140 20 AT 106

PDF Datasheet Preview

RI-80 SMD Series Dry Reed Switch

RI-80 SMD Series Ultra-micro dry-reed switch hermetically sealed in a gas-filled glass envelope. Single-pole, single-throw SPST type, having normally open contacts, and containing two magnetically actuated reeds.

The switch is of the double-ended type and may be actuated by an electromagnet, a permanent magnet or a combination of both.

RI-80 SMD Series Features Ideal for proximity sensors, telecom & medical applications World’s smallest high quality reed switch Contact layers Gold, sputtered ruthenium Superior glass-to-metal seal and blade alignment

Dimensions in inches mm

RI-80 SMD G1 Model

RI-80 SMD G2 Model

RI-80 SMD J-Lead Model

General data for RI-80 SMD

AT-Customization The RI-80 SMD can be supplied in operate ranges to customer specification.

Loaded conditions Resistive load 5V 100 mA operating frequency 170 Hz

Life expectancy min. 107 operations with a failure rate of less than 10-8 with a confidence level of

Coils All characteristics are based on unmodified switches. The switches are defined using the Philips Standard

End of life criteria Contact resistance > after 4 ms Release time > ms latching or contact sticking

Coil. For more information, see Reed Switch Technical & Application Information Section of this catalog.

Switching different loads involves different life expectancy and reliability data. Further information available

Life expectancy and reliability
upon request.

The life expectancy data given below are valid for a coil energized at times the published maximum operate value for each type in the RI-80 series.

Mechanical Data Contact arrangement is normally open lead finish is tinned and can be mounted in any position.

No-load conditions operating frequency 100 Hz Life expectancy min. 108 operations with a failure rate of less than 2 x10-9 with a confidence level of

Shock The switches are tested in accordance with “IEC 68-2-27”, test Ea peak acceleration 150 G, half

End of life criteria Contact resistance > after 2 ms Release time > 2ms latching or contact sticking .
sinewave duration 11 ms . Such a shock will not cause an open switch no magnetic field present to close nor a switch kept closed by an 80 AT coil to open.
88 COTO TECHNOLOGY USA Tel 401 943-2686 / Fax 401 942-0920 6 Europe Tel +31-45-5439343 / Fax +31-45-5427216

RI-80 SMD Series Dry Reed Switch

Model Number Parameters

Operating Characteristics

Operate Range** Release Range** Operate Time - including bounce typ. Bounce Time typ. Release Time max Resonant Frequency typ.

Electrical Characteristics

Switched Power max Switched Voltage DC max Switched Voltage AC, RMS value max Switched Current DC max Switched Current AC, RMS value max Carry Current DC AC, RMS value max Breakdown Voltage min Contact Resistance initial max Contact Resistance initial typ. Contact Capacitance max Insulation Resistance min

Test Conditions
energization
energization without test coil

RH 45%

Units

AT ms µs Hz

W V mA A V pF

RI-80 SMD
5-15** 2-13** 20 AT 20 AT 20 AT
5 175* 140 350 250 230 160 20 AT 140 20 AT 106

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived RI-80SMD0515-J Datasheet file may be downloaded here without warranties.

Datasheet ID: RI-80SMD0515-J 506932