CYV270M0101EQ-SXC

CYV270M0101EQ-SXC Datasheet

CYV270M0101EQ

Part	Datasheet
CYV270M0101EQ-SXC	CYV270M0101EQ-SXC (pdf)

PDF Datasheet Preview
CYV270M0101EQ Adaptive Video Cable Equalizer • Adaptive cable equalization • SMPTE 259M compliant • Supports DVB-ASI at 270 Mbps • Multi standard operation from 143 Mbps to 360 Mbps • Cable length indicator for SD-SDI data rates • Maximum cable length adjustment for SD-SDI data rates • Carrier detect and mute functionality for SD-SDI data rates • Equalizer bypass mode • Seamless connection with HOTLink II family and receiver • Equalizes up to 350m of Canare L-5CFB and Belden 1694A coaxial cable at 270 Mbps • Low power 160 mW at 3.3V • Single 3.3V supply • 16-pin SOIC • um CMOS technology • Pb-free and RoHS compliant • Uses Cypress CLEANLink technology • Pin compatible to existing equalizer devices Equalizer System Connection Diagram Functional Description The CYV270M0101EQ is an adaptive video cable equalizer designed to equalize and restore signals received over 75Ω coaxial cable. The equalizer meets SMPTE 259M data rates and is optimized for performance at 270 Mbps. The CYV270M0101EQ is optimized to equalize up to 350m of Canare L-5CFB and Belden 1694A coaxial cable at 270 Mbps. The CYV270M0101EQ connects seamlessly to the HOTLink II family of transceivers and HOTLink receivers. The CYV270M0101EQ has DC restoration for compensation of the DC content of the SMPTE pathological patterns. A cable length indicator CLI provides an indication of the cable length equalized at SD-SDI data rates. The maximum cable length adjust MCLADJ sets the approximate maximum cable length to equalize. The CYV270M0101EQ differential serial outputs SDO, SDO mute when the approximate cable length set by MCLADJ is reached. CD/MUTE is a bidirectional pin that provides an indication of the signal present at the equalizer inputs. It also controls muting the outputs of the equalizer. Power consumption is typically 160 mW at 3.3V. HOTLink II Serializer Cable Driver Serial Links Copper Cable Connections CYV270M0101EQ Adaptive Cable Equalizer HOTLink II Deserializer • San Jose, CA 95134-1709 • 408-943-2600 [+] Feedback CYV270M0101EQ Equalizer Block Diagram CYV270M0101EQ Adaptive Video Cable Equalizer Block Diagram CYV270M0101EQ Adaptive Video Cable Equalizer Block Diagram MCLADJ Cable Length Analog Adjustor and Mute Threshold Block Carrier Detect and Mute Control Block DC Restore SDI, SDI Equalizer Differential Output MUTE CD BYPASS SDO, SDO Pinouts Figure Pin Diagram - 16 Pin SOIC Top View CLI VCC 2 GND 3 SDI 4 SDI 5 GND 6 AGC+ 7 AGC- 8 CYV270M0101EQ 16 CD/MUTE 15 VCC 14 GND 13 SDO 12 SDO 11 GND 10 MCLADJ 9 BYPASS Page 2 of 10 [+] Feedback CYV270M0101EQ Table Pin Descriptions - CYV270M0101EQ Single Channel Cable Equalizer Name IO Characteristics Signal Description Ordering Information Ordering Code CYV270M0101EQ-SXC Package Dimensions CYV270M0101EQ Package Name Package Type SZ16.15 Pb-Free 16-Pin 150 Mil SOIC Figure 16-Pin 150 Mil SOIC S16.15 Operating Range 0 to 70°C 51-85068-*B Page 9 of 10 [+] Feedback CYV270M0101EQ Document History Page Document Title CYV270M0101EQ Adaptive Video Cable Equalizer Document Number 001-06830 Ecn No. Issue Date Orig. Of Change Description Of Change 427547 SEE ECN New preliminary datasheet 663916 SEE ECN Updated AC and DC parameters. Changed datasheet status from preliminary to final 1396423 SEE ECN UKK/AESA Updated AC and DC electrical characteristics and pin description of CD/MUTE and MCLADJ Cypress Semiconductor Corporation, The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use of any circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended to be used for medical, life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges. Any Source Code software and/or firmware is owned by Cypress Semiconductor Corporation Cypress and is protected by and subject to worldwide patent protection United States and foreign , United States copyright laws and international treaty provisions. Cypress hereby grants to licensee a personal, non-exclusive, non-transferable license to copy, use, modify, create derivative works of, and compile the Cypress Source Code and derivative works for the sole purpose of creating custom software and or firmware in support of licensee product to be used only in conjunction with a Cypress integrated circuit as specified in the applicable agreement. Any reproduction, modification, translation, compilation, or representation of this Source Code except as specified above is prohibited without the express written permission of Cypress. Disclaimer CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Cypress reserves the right to make changes without further notice to the materials described herein. Cypress does not assume any liability arising out of the application or use of any product or circuit described herein. Cypress does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress’ product in a life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges. Use may be limited by and subject to the applicable Cypress software license agreement. Page 10 of 10 PSoC Designer , Programmable System-on-Chip , and PSoC Express are trademarks and is a registered trademark of Cypress Semiconductor Corp. All other trademarks or registered trademarks referenced herein are property of the respective corporations. Purchase of I2C components from Cypress or one of its sublicensed Associated Companies conveys a license under the Philips I2C Patent Rights to use these components in an I2C system, provided that the system conforms to the I2C Standard Specification as defined by Philips. HOTLink is a registered trademark and HOTLink II is a trademark of Cypress Semiconductor. All other trademarks or registered trademarks referenced herein are property of the respective corporations. All products and company names mentioned in this document may be the trademarks of their respective holders. [+] Feedback

PDF Datasheet Preview

CYV270M0101EQ

Adaptive Video Cable Equalizer
• Adaptive cable equalization
• SMPTE 259M compliant
• Supports DVB-ASI at 270 Mbps
• Multi standard operation from 143 Mbps to 360 Mbps
• Cable length indicator for SD-SDI data rates
• Maximum cable length adjustment for SD-SDI data rates
• Carrier detect and mute functionality for SD-SDI data rates
• Equalizer bypass mode
• Seamless connection with HOTLink II family and
receiver
• Equalizes up to 350m of Canare L-5CFB and Belden 1694A
coaxial cable at 270 Mbps
• Low power 160 mW at 3.3V
• Single 3.3V supply
• 16-pin SOIC
• um CMOS technology
• Pb-free and RoHS compliant
• Uses Cypress CLEANLink technology
• Pin compatible to existing equalizer devices

Equalizer System Connection Diagram

Functional Description

The CYV270M0101EQ is an adaptive video cable equalizer designed to equalize and restore signals received over 75Ω coaxial cable. The equalizer meets SMPTE 259M data rates and is optimized for performance at 270 Mbps. The CYV270M0101EQ is optimized to equalize up to 350m of Canare L-5CFB and Belden 1694A coaxial cable at 270 Mbps. The CYV270M0101EQ connects seamlessly to the HOTLink II family of transceivers and HOTLink receivers.

The CYV270M0101EQ has DC restoration for compensation of the DC content of the SMPTE pathological patterns. A cable length indicator CLI provides an indication of the cable length equalized at SD-SDI data rates. The maximum cable length adjust MCLADJ sets the approximate maximum cable length to equalize. The CYV270M0101EQ differential serial outputs SDO, SDO mute when the approximate cable length set by MCLADJ is reached. CD/MUTE is a bidirectional pin that provides an indication of the signal present at the equalizer inputs. It also controls muting the outputs of the equalizer.

Power consumption is typically 160 mW at 3.3V.

HOTLink II Serializer

Cable Driver

Serial Links

Copper Cable Connections

CYV270M0101EQ Adaptive Cable Equalizer

HOTLink II Deserializer
• San Jose, CA 95134-1709
• 408-943-2600
[+] Feedback

CYV270M0101EQ

Equalizer Block Diagram

CYV270M0101EQ Adaptive Video Cable Equalizer Block Diagram CYV270M0101EQ Adaptive Video Cable Equalizer Block Diagram

MCLADJ

Cable Length Analog Adjustor and Mute Threshold Block

Carrier Detect and Mute Control Block

DC Restore

SDI, SDI

Equalizer

Differential Output

MUTE CD

BYPASS SDO, SDO

Pinouts

Figure Pin Diagram - 16 Pin SOIC Top View

CLI VCC 2 GND 3 SDI 4 SDI 5 GND 6 AGC+ 7 AGC- 8

CYV270M0101EQ
16 CD/MUTE 15 VCC 14 GND 13 SDO 12 SDO 11 GND 10 MCLADJ
9 BYPASS

Page 2 of 10 [+] Feedback

CYV270M0101EQ

Table Pin Descriptions - CYV270M0101EQ Single Channel Cable Equalizer

Name

IO Characteristics Signal Description
Ordering Information
Ordering Code CYV270M0101EQ-SXC

Package Dimensions

CYV270M0101EQ

Package Name

Package Type

SZ16.15

Pb-Free 16-Pin 150 Mil SOIC

Figure 16-Pin 150 Mil SOIC S16.15

Operating Range
0 to 70°C
51-85068-*B

Page 9 of 10 [+] Feedback

CYV270M0101EQ

Document History Page

Document Title CYV270M0101EQ Adaptive Video Cable Equalizer Document Number 001-06830

Ecn No.

Issue Date

Orig. Of Change

Description Of Change
427547 SEE ECN

New preliminary datasheet
663916 SEE ECN

Updated AC and DC parameters. Changed datasheet status from
preliminary to final
1396423 SEE ECN UKK/AESA Updated AC and DC electrical characteristics and pin description of

CD/MUTE and MCLADJ

Cypress Semiconductor Corporation, The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use of any circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended to be used for medical, life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges.

Any Source Code software and/or firmware is owned by Cypress Semiconductor Corporation Cypress and is protected by and subject to worldwide patent protection United States and foreign , United States copyright laws and international treaty provisions. Cypress hereby grants to licensee a personal, non-exclusive, non-transferable license to copy, use, modify, create derivative works of, and compile the Cypress Source Code and derivative works for the sole purpose of creating custom software and or firmware in support of licensee product to be used only in conjunction with a Cypress integrated circuit as specified in the applicable agreement. Any reproduction, modification, translation, compilation, or representation of this Source Code except as specified above is prohibited without the express written permission of Cypress.

Disclaimer CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Cypress reserves the right to make changes without further notice to the materials described herein. Cypress does not assume any liability arising out of the application or use of any product or circuit described herein. Cypress does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress’ product in a life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges.

Use may be limited by and subject to the applicable Cypress software license agreement.

Page 10 of 10

PSoC Designer , Programmable System-on-Chip , and PSoC Express are trademarks and is a registered trademark of Cypress Semiconductor Corp. All other trademarks or registered trademarks referenced herein are property of the respective corporations. Purchase of I2C components from Cypress or one of its sublicensed Associated Companies conveys a license under the Philips I2C Patent Rights to use these components in an I2C system, provided that the system conforms to the I2C Standard Specification as defined by Philips. HOTLink is a registered trademark and HOTLink II is a trademark of Cypress Semiconductor. All other trademarks or registered trademarks referenced herein are property of the respective corporations. All products and company names mentioned in this document may be the trademarks of their respective holders.
[+] Feedback

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CYV270M0101EQ-SXC Datasheet file may be downloaded here without warranties.

Datasheet ID: CYV270M0101EQ-SXC 508246