CYV15G0203TB-BGC

CYV15G0203TB-BGC Datasheet


CYV15G0203TB

Part Datasheet
CYV15G0203TB-BGC CYV15G0203TB-BGC CYV15G0203TB-BGC (pdf)
PDF Datasheet Preview
CYV15G0203TB

Independent Clock Dual HOTLink II Serializer
• Second-generation technology
• Compliant to SMPTE 292M and SMPTE 259M video
standards
• Dual-channel video serializer
195- to 1500-Mbps serial data signaling rate

Simultaneous operation at different signaling rates
• Supports half-rate and full-rate clocking
• Internal phase-locked loops PLLs with no external

PLL components
• Redundant differential PECL-compatible serial outputs
per channel

No external bias resistors required

Signaling-rate controlled edge-rates

Internal source termination
• Synchronous LVTTL parallel interface
• JTAG boundary scan
• Built-In Self-Test BIST for at-speed link testing
• Low-power 1.4W 3.3V typical
• Single 3.3V supply
• Thermally enhanced BGA
• Pb-Free package option available
• BiCMOS technology

Functional Description

The CYV15G0203TB Independent Clock Dual HOTLink II Serializer is a point-to-point or point-to-multipoint communications building block enabling transfer of data over a variety of high-speed serial links including SMPTE 292M and SMPTE 259M video applications. It supports signaling rates in the range of 195 to 1500 Mbps per serial link. The two channels are independent and can simultaneously operate at different rates. Each channel accepts 10-bit parallel characters in an Input Register and converts them to serial data. Figure 1 illustrates typical connections between independent video coprocessors and corresponding CYV15G0203TB Serializer and CYV15G0204RB Reclocking Deserializer chips.

The CYV15G0203TB satisfies the SMPTE-259M and SMPTE292M compliance as per SMPTE EG34-1999 Pathological Test Requirements.

As a second-generation HOTLink device, the CYV15G0203TB extends the HOTLink family with enhanced levels of integration and faster data rates, while maintaining serial-link compatibility data, and BIST with other HOTLink devices. Each channel of the CYV15G0203TB Dual HOTLink II device accepts scrambled 10-bit transmission characters. These characters are serialized and output from dual Positive ECL PECL compatible differential transmission-line drivers at a bit-rate of either 10- or 20-times the input reference clock for that channel.

Each channel contains an independent BIST pattern generator. This BIST hardware allows at-speed testing of the high-speed serial data paths in each transmit section of this device, each receive section of a connected HOTLink II device, and across the interconnecting links.

The CYV15G0203TB is ideal for SMPTE applications where different data rates and serial interface standards are necessary for each channel. Some applications include multiformat routers, switchers, format converters, and cameras.

Reclocked Output

Video Coprocessor

Video Coprocessor

Independent Channel

CYV15G0203TB Serializer

Serial Links

Independent Channel

CYV15G0204RB Reclocking Deserializer

Reclocked Output

Figure HOTLink II System Connections

Cypress Semiconductor Corporation
• 3901 North First Street
• San Jose, CA 95134
• 408-943-2600
[+] Feedback

CYV15G0203TB Serializer Logic Block Diagram

CYV15G0203TB

TXDA[9:0] REFCLKA± TXDB[9:0] REFCLKB±

Phase Align Buffer Serializer

Phase Align Buffer Serializer

OUTA1± OUTA2± OUTB1± OUTB2±

Page 2 of 19 [+] Feedback

Input Register PPhhaassee--AlAiligngn BBufffferer BIST LFSR Shifter

Serializer Path Block Diagram

REFCLKA+

TXRATEA

SPDSELA
Ordering Information

Speed Standard
Ordering Code CYV15G0203TB-BGC CYV15G0203TB-BGXC

Package Name

BL256

BL256

Package Type 256-Ball Thermally Enhanced Ball Grid Array Pb-Free 256-Ball Thermally Enhanced Ball Grid Array

Operating Range

Commercial

Commercial

Package Diagram
256-Lead L2 Ball Grid Array 27 x 27 x mm BL256
51-85123-*E

HOTLink is a registered trademark and HOTLink II is a trademark of Cypress Semiconductor. All product and company names mentioned in this document may be the trademarks of their respective holders.

Page 18 of 19

Cypress Semiconductor Corporation, The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use
of any circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended to be
used for medical, life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its
products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress
products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges.
[+] Feedback

CYV15G0203TB

Document History Page

Document Title CYV15G0203TB Independent Clock Dual HOTLink II Serializer Document Number 38-02105

ECN NO.

ISSUE DATE

ORIG. OF CHANGE

DESCRIPTION OF CHANGE
246850 See ECN

New Data Sheet
338721 See ECN

Added Pb-Free package option availability
384307 See ECN

Page 19 of 19 [+] Feedback
More datasheets: 9158028030001 | 9158024030001 | 9158028020001 | 9158020025001 | 9158020020001 | 9158020030001 | 9158016025001 | 9158016030001 | MU14-250DFK | MU18-250DFK


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CYV15G0203TB-BGC Datasheet file may be downloaded here without warranties.

Datasheet ID: CYV15G0203TB-BGC 508240