MU14-250DFK

MU14-250DFK Datasheet

MU18-250DF, MU14-250DF

Part	Datasheet
MU14-250DFK	MU14-250DFK (pdf)

Related Parts	Information
MU18-250DFK	MU18-250DFK

PDF Datasheet Preview
Scotchlok Terminals MU18-250DF, MU14-250DF Female Disconnect, Non-Insulated, Butted Seam Data Sheet Product Number MU18-250DF MU14-250DF Wire Range AWG 22-18 16-14 Mates with Male Tab Width x Thickness Barrel Length I.D. UNDERWRITERS LABORATORIES STANDARD NO. UL 486C 3M FILE NO. E70512 Specifications Wire Size Barrel Seam Maximum Voltage Rating: Maximum Current Terminal Material Plating: CANADIAN STANDARDS ASSOCIATION STANDARD NO. NO. 0, 65 3M FILE NO. LR22190 See Table Above Butted 600 V Building Wire 1000 V signs or fixtures Luminaires Same as Wire Brass Tin Installation Information WARNING Turn power off before installing or removing terminal. All electrical work should be done according to appropriate electrical codes. UL Listed and CSA Certified for use on stranded copper wire only. Strip away the end 1/4 inch of wire insulation. Make the crimp in the proper station of a recommended 3M crimp tool TH-440, TH-450 scissor style , or TR-490 ratchet style hand tools. Barrel Crimp Electrical Suitable for factory application on steel or brass tabs UL and CSA. Suitable for field application on brass tabs, strain relief required, UL only. Engineering Specification Crimp-Type Female Disconnect Terminals shall, electrically and mechanically, connect permanently to a prestripped end of a stranded copper wire and have a tongue portion with fingers which grip a Male Disconnect in a separable, reusable manner, forming a Quick Connect Wiring Termination. The connector line shall offer tongue variations sized to grip Male Tabs x barrel variations in construction non-insulated, nylon insulated with insulation grip, etc. . The tongue portion shall be marked with the wire range and manufacturer’s symbol The Non-Insulated Female Disconnect shall be tin plated thick brass with a tongue for gripping a Male Tab of thickness and a butted seam barrel sized for a specified AWG wire range 22-18, Insulated connectors shall be UL Listed and CSA Certified for 600 V building wire 1000 V signs or lighting fixtures luminaires . Female Disconnects shall be suitable for field or factory wiring, with a UL Recognized strain relief required. 3M and Scotchlok are trademarks of 3M Company. is a trademark of Underwriters Laboratories. is a trademark of Canadian Standards Association. IMPORTANT NOTICE Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture as of the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. Electrical Products Division 6801 River Place Blvd. Austin, TX 78726-9000 Litho in USA. 3M 2003 78-8125-9936-9-B

PDF Datasheet Preview

Scotchlok Terminals

MU18-250DF, MU14-250DF

Female Disconnect, Non-Insulated, Butted Seam

Data Sheet

Product Number

MU18-250DF

MU14-250DF

Wire Range AWG
22-18
16-14

Mates with Male Tab Width x Thickness

Barrel

Length

I.D.

UNDERWRITERS LABORATORIES STANDARD NO. UL 486C 3M FILE NO. E70512

Specifications

Wire Size Barrel Seam Maximum Voltage Rating:

Maximum Current Terminal Material Plating:

CANADIAN STANDARDS ASSOCIATION STANDARD NO. NO. 0, 65 3M FILE NO. LR22190

See Table Above Butted 600 V Building Wire 1000 V signs or fixtures Luminaires Same as Wire Brass Tin

Installation Information WARNING

Turn power off before installing or removing terminal. All electrical work should be done according to appropriate electrical codes.

UL Listed and CSA Certified for use on stranded copper wire only. Strip away the end 1/4 inch of wire insulation. Make the crimp in the proper station of a recommended 3M crimp tool TH-440, TH-450 scissor style , or TR-490 ratchet style hand tools.

Barrel Crimp Electrical

Suitable for factory application on steel or brass tabs UL and CSA. Suitable for field application on brass tabs, strain relief required, UL only.

Engineering Specification

Crimp-Type Female Disconnect Terminals shall, electrically and mechanically, connect permanently to a prestripped end of a stranded copper wire and have a tongue portion with fingers which grip a Male Disconnect in a separable, reusable manner, forming a Quick Connect Wiring Termination.

The connector line shall offer tongue variations sized to grip Male Tabs x barrel variations in construction non-insulated, nylon insulated with insulation grip, etc. . The tongue portion shall be marked with the wire range and manufacturer’s symbol

The Non-Insulated Female Disconnect shall be tin plated thick brass with a tongue for gripping a Male Tab of thickness and a butted seam barrel sized for a specified AWG wire range 22-18,

Insulated connectors shall be UL Listed and CSA Certified for 600 V building wire 1000 V signs or lighting fixtures luminaires .

Female Disconnects shall be suitable for field or factory wiring, with a UL Recognized strain relief required.
3M and Scotchlok are trademarks of 3M Company.
is a trademark of Underwriters Laboratories.
is a trademark of Canadian Standards Association.

IMPORTANT NOTICE Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use.

Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture as of the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted.

Electrical Products Division
6801 River Place Blvd. Austin, TX 78726-9000

Litho in USA. 3M 2003 78-8125-9936-9-B

More datasheets: 9158024025001 | 9158028025001 | 9158028030001 | 9158024030001 | 9158028020001 | 9158020025001 | 9158020020001 | 9158020030001 | 9158016025001 | 9158016030001

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MU14-250DFK Datasheet file may be downloaded here without warranties.

Datasheet ID: MU14-250DFK 520927