CYII4SC6600-EVAL

CYII4SC6600-EVAL Datasheet

IBIS4-6600 CYII4SM6600AB

Part	Datasheet
CYII4SC6600-EVAL	CYII4SC6600-EVAL (pdf)

Related Parts	Information
CYII4SM6600-EVAL	CYII4SM6600-EVAL

PDF Datasheet Preview
IBIS4-6600 CYII4SM6600AB MP CMOS Image Sensor • 2210 H x 3002 V Active Pixels • µm X µm Square Pixels • 1 inch Optical Format • Monochrome or Color Digital Output • Frame Rate: 5 fps 2210 x 3002 89 fps 640 x 480 • High Dynamic Range Modes Double Slope, Non Destructive Read out NDR • Electronic Rolling Shutter • Master Clock 40 MPS/40 MHz • Limited Supplies 2.5V and 3.3V • -30°C to +65°C Operational Temperature Range • 68-Pin LCC Package • Power Dissipation 0.19W • Machine vision • Biometry • Document Scanning The IBIS4-6600 is a solid-state CMOS image sensor that integrates complete analog image acquisition, and a digitizer and digital signal processing system on a single chip. This image sensor has a resolution of MPixel with 2210 x 3002 active pixels. The image size is fully programmable for user-defined windows. The pixels are on a µm pitch. This sensor is available in a Monochrome version or Bayer RGB patterned color filter array. The user programmable row and column start and stop positions enable windowing down to 2x1 pixel window for digital zoom. Sub sampling reduces resolution while maintaining the constant field of view. The analog video output of the pixel array is processed by an on-chip analog signal pipeline. Double Sampling DS eliminates the fixed pattern noise. The programmable gain and offset amplifier maps the signal swing to the ADC input range. A 10-bit ADC converts the analog data to a 10-bit digital word stream. The sensor uses a three-wire Serial-Parallel SPI interface. It operates with a single 2.5V power supply and requires only one master clock for operation up to 40 MHz. It is housed in a 68-pin ceramic LCC package. This data sheet enables you to develop a camera system, based on the described timing and interfacing given in the following sections. Figure IBIS4-6600 Image Sensor • San Jose, CA 95134-1709 • 408-943-2600 [+] Feedback IBIS4-6600 CYII4SM6600AB Ordering Information Marketing Part Number CYII4SM6600AB-QDC CYII4SM6600AB-QWC CYII4SE6600AB-QDC CYII4SE6600AB-QFCH CYII4SM6600-EVAL CYII4SC6600-EVAL Description Mono with Glass Mono without Glass Color micro lens with Glass Color micro lens with IR Coating, High Grade Mono Demo Kit Color Demo Kit Package 68-pin LCC Demo Kit Specifications General Specifications Parameter Pixel Architecture Pixel Size Resolution Pixel Rate Shutter Type Full Frame Rate Specification 3T-Pixel µm x µm 2210 x 3002 40 MHz Electronic Rolling Shutter 5 frames/second Remarks The resolution and pixel size results in a mm x mm optical active area. Using a 40 MHz system clock and 1 or 2 parallel outputs Increases with ROI read out and/or subsampling Electro Optical Specifications Parameter FPN local PRNU local Conversion Gain Output Signal Amplitude Saturation Charge Sensitivity peak Sensitivity visible Peak QE * FF Peak Spectral Response Specification Conversion Gain 0.6V e411 V.m2/W.s V/lux.s 328 V.m2/W.s V/lux.s 25% A/W Fill Factor Dark Current Dark Signal Non Uniformity Temporal Noise S/N Ratio Spectral Sensitivity Range Optical Cross Talk Power Dissipation 35% mV/s 78 e-/s mV/s 191 e-/s 24 RMS e895:1 59 dB 400 - 1000 nm 15% 4% 190 mW Remarks RMS% of saturation signal RMS of signal level At output measured At nominal conditions At 650 nm 85 lux = 1 W/m2 400-700 nm 163 lux = 1 W/m2 Average QEFF = 22% visible range Average SRFF = A/W visible range See the section Spectral Response Curve on page Light sensitive part of pixel measured Typical value of average dark current of the whole pixel array at 21°C Dark current RMS value at 21°C Measured at digital output in the dark Measured at digital output in the dark To the first neighboring pixel To the second neighboring pixel Typical including ADCs Page 2 of 34 [+] Feedback IBIS4-6600 CYII4SM6600AB Spectral Response Curve QE 30% Figure Spectral Response Curve QE 20% Spectral response [A/W] QE 10% 1000 Wavelenght [nm] Figure 2 shows the characteristics of the spectral response. The curve is measured directly on the pixels. It includes the effects of nonsensitive areas in the pixel, for example, interconnection lines. The sensor is light sensitive between 400 and 1000 nm. The peak QE * FF is 25% approximately 650 nm. In view of a fill factor of 35%, the QE is close to 70% between 500 and 700 nm. Page 3 of 34 [+] Feedback IBIS4-6600 CYII4SM6600AB Electro Voltaic Response Curve Figure Electro Voltaic Response Curve Output swing [V] 5000 10000 FPW Ordering information update E 2649816 03/17/2009 PCI/AESA Final data sheet. Changed title from “IBIS4-A-6600 CMOS Image Sensor” to “IBIS4-6600 CYII4SM6600AB MP CMOS Image Sensor”. Updated Typical Response Curve of the RGB Filters on page 7 and added Relative Response Graph on page Updated Package Diagrams and data sheet template. F 2766198 09/19/09 NVEA Updated Ordering Information table *G 2902961 04/01/10 NVEA Removed inactive part from the ordering information table. Sales, Solutions, and Legal Information Worldwide Sales and Design Support Cypress maintains a worldwide network of offices, solution centers, manufacturer’s representatives, and distributors. For more information on Image sensor products, please contact Cypress offers standard and customized CMOS image sensors for consumer as well as industrial and professional applications. Consumer applications include the fast growing high volume cell phone, digital still cameras as well as automotive applications. Cypress' CMOS image sensors are characterized by very high pixel counts, large area, very high frame rates, large dynamic range, and high sensitivity. Cypress Semiconductor Corporation, The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use of any circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended to be used for medical, life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges. Any Source Code software and/or firmware is owned by Cypress Semiconductor Corporation Cypress and is protected by and subject to worldwide patent protection United States and foreign , United States copyright laws and international treaty provisions. Cypress hereby grants to licensee a personal, non-exclusive, non-transferable license to copy, use, modify, create derivative works of, and compile the Cypress Source Code and derivative works for the sole purpose of creating custom software and or firmware in support of licensee product to be used only in conjunction with a Cypress integrated circuit as specified in the applicable agreement. Any reproduction, modification, translation, compilation, or representation of this Source Code except as specified above is prohibited without the express written permission of Cypress. Disclaimer CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Cypress reserves the right to make changes without further notice to the materials described herein. Cypress does not assume any liability arising out of the application or use of any product or circuit described herein. Cypress does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress’ product in a life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges. Use may be limited by and subject to the applicable Cypress software license agreement. All products and company names mentioned in this document may be the trademarks of their respective holders. Page 34 of 34 [+] Feedback

PDF Datasheet Preview

IBIS4-6600 CYII4SM6600AB

MP CMOS Image Sensor
• 2210 H x 3002 V Active Pixels
• µm X µm Square Pixels
• 1 inch Optical Format
• Monochrome or Color Digital Output
• Frame Rate:
5 fps 2210 x 3002 89 fps 640 x 480
• High Dynamic Range Modes Double Slope, Non Destructive Read out NDR
• Electronic Rolling Shutter
• Master Clock 40 MPS/40 MHz
• Limited Supplies 2.5V and 3.3V
• -30°C to +65°C Operational Temperature Range
• 68-Pin LCC Package
• Power Dissipation 0.19W
• Machine vision
• Biometry
• Document Scanning

The IBIS4-6600 is a solid-state CMOS image sensor that integrates complete analog image acquisition, and a digitizer and digital signal processing system on a single chip. This image sensor has a resolution of MPixel with 2210 x 3002 active pixels. The image size is fully programmable for user-defined windows. The pixels are on a µm pitch. This sensor is available in a Monochrome version or Bayer RGB patterned color filter array. The user programmable row and column start and stop positions enable windowing down to 2x1 pixel window for digital zoom. Sub sampling reduces resolution while maintaining the constant field of view. The analog video output of the pixel array is processed by an on-chip analog signal pipeline. Double Sampling DS eliminates the fixed pattern noise. The programmable gain and offset amplifier maps the signal swing to the ADC input range. A 10-bit ADC converts the analog data to a 10-bit digital word stream. The sensor uses a three-wire Serial-Parallel SPI interface. It operates with a single 2.5V power supply and requires only one master clock for operation up to 40 MHz. It is housed in a 68-pin ceramic LCC package. This data sheet enables you to develop a camera system, based on the described timing and interfacing given in the following sections. Figure IBIS4-6600 Image Sensor
• San Jose, CA 95134-1709
• 408-943-2600
[+] Feedback

IBIS4-6600 CYII4SM6600AB
Ordering Information

Marketing Part Number CYII4SM6600AB-QDC CYII4SM6600AB-QWC CYII4SE6600AB-QDC CYII4SE6600AB-QFCH CYII4SM6600-EVAL CYII4SC6600-EVAL

Description Mono with Glass Mono without Glass Color micro lens with Glass Color micro lens with IR Coating, High Grade Mono Demo Kit Color Demo Kit

Package 68-pin LCC Demo Kit

Specifications

General Specifications

Parameter Pixel Architecture Pixel Size Resolution Pixel Rate Shutter Type Full Frame Rate

Specification 3T-Pixel µm x µm 2210 x 3002 40 MHz Electronic Rolling Shutter 5 frames/second

Remarks The resolution and pixel size results in a mm x mm optical active area. Using a 40 MHz system clock and 1 or 2 parallel outputs Increases with ROI read out and/or subsampling

Electro Optical Specifications

Parameter FPN local PRNU local Conversion Gain Output Signal Amplitude Saturation Charge Sensitivity peak

Sensitivity visible

Peak QE * FF Peak Spectral Response

Specification Conversion Gain 0.6V e411 V.m2/W.s V/lux.s 328 V.m2/W.s V/lux.s 25% A/W

Fill Factor Dark Current

Dark Signal Non Uniformity

Temporal Noise S/N Ratio Spectral Sensitivity Range Optical Cross Talk

Power Dissipation
35% mV/s 78 e-/s mV/s 191 e-/s 24 RMS e895:1 59 dB 400 - 1000 nm 15% 4% 190 mW

Remarks RMS% of saturation signal RMS of signal level At output measured At nominal conditions

At 650 nm 85 lux = 1 W/m2 400-700 nm 163 lux = 1 W/m2 Average QE*FF = 22% visible range Average SR*FF = A/W visible range See the section Spectral Response Curve on page Light sensitive part of pixel measured Typical value of average dark current of the whole pixel array at 21°C Dark current RMS value at 21°C

Measured at digital output in the dark Measured at digital output in the dark

To the first neighboring pixel To the second neighboring pixel Typical including ADCs

Page 2 of 34 [+] Feedback

IBIS4-6600 CYII4SM6600AB

Spectral Response Curve

QE 30%

Figure Spectral Response Curve

QE 20%

Spectral response [A/W]

QE 10%
1000

Wavelenght [nm]

Figure 2 shows the characteristics of the spectral response. The curve is measured directly on the pixels. It includes the effects of nonsensitive areas in the pixel, for example, interconnection lines. The sensor is light sensitive between 400 and 1000 nm. The peak QE * FF is 25% approximately 650 nm. In view of a fill factor of 35%, the QE is close to 70% between 500 and 700 nm.

Page 3 of 34 [+] Feedback

IBIS4-6600 CYII4SM6600AB

Electro Voltaic Response Curve

Figure Electro Voltaic Response Curve

Output swing [V]
5000
10000
FPW Ordering information update
*E 2649816 03/17/2009 PCI/AESA Final data sheet. Changed title from “IBIS4-A-6600 CMOS Image Sensor” to “IBIS4-6600 CYII4SM6600AB MP CMOS Image Sensor”. Updated Typical Response Curve of the RGB Filters on page 7 and added Relative Response Graph on page Updated Package Diagrams and data sheet template.
*F 2766198 09/19/09
NVEA Updated Ordering Information table
*G 2902961 04/01/10
NVEA Removed inactive part from the ordering information table.

Sales, Solutions, and Legal Information

Worldwide Sales and Design Support Cypress maintains a worldwide network of offices, solution centers, manufacturer’s representatives, and distributors. For more information on Image sensor products, please contact Cypress offers standard and customized CMOS image sensors for consumer as well as industrial and professional applications. Consumer applications include the fast growing high volume cell phone, digital still cameras as well as automotive applications. Cypress' CMOS image sensors are characterized by very high pixel counts, large area, very high frame rates, large dynamic range, and high sensitivity.

Cypress Semiconductor Corporation, The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use of any circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended to be used for medical, life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges.

Any Source Code software and/or firmware is owned by Cypress Semiconductor Corporation Cypress and is protected by and subject to worldwide patent protection United States and foreign , United States copyright laws and international treaty provisions. Cypress hereby grants to licensee a personal, non-exclusive, non-transferable license to copy, use, modify, create derivative works of, and compile the Cypress Source Code and derivative works for the sole purpose of creating custom software and or firmware in support of licensee product to be used only in conjunction with a Cypress integrated circuit as specified in the applicable agreement. Any reproduction, modification, translation, compilation, or representation of this Source Code except as specified above is prohibited without the express written permission of Cypress.

Disclaimer CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Cypress reserves the right to make changes without further notice to the materials described herein. Cypress does not assume any liability arising out of the application or use of any product or circuit described herein. Cypress does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress’ product in a life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges.

Use may be limited by and subject to the applicable Cypress software license agreement.

All products and company names mentioned in this document may be the trademarks of their respective holders.

Page 34 of 34
[+] Feedback

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CYII4SC6600-EVAL Datasheet file may be downloaded here without warranties.

Datasheet ID: CYII4SC6600-EVAL 508201