CY8CKIT-046

CY8CKIT-046 Datasheet

CY8CKIT-046 4 L-Series Pioneer Kit

Part	Datasheet
CY8CKIT-046	CY8CKIT-046 (pdf)

PDF Datasheet Preview
CY8CKIT-046 4 L-Series Pioneer Kit Last Updated Jan 12, 2016 Version ** The 4 L-Series Pioneer Kit is a low-cost hardware and software platform to enable design and debug of the PSoC 4200L device. Coming soon! Featuring PSoC 4200L Device The PSoC 4 L-Series Pioneer Kit features the PSoC 4200L device - industry’s most flexible 32-bit solution. The PSoC 4200L device is a member of the PSoC 4 L-Series device family with up to 256KB flash, 98 GPIOs, 13 programmable analog blocks, 20 programmable digital blocks, dual hardware blocks, full-speed USB, DMA and CAN. Industry’s Best and Simplest CapSense The PSoC 4 L-Series Pioneer Kit features a 13-element CapSense Gesture Pad and two CapSense proximity headers that allows you to quickly implement and evaluate touch-based and proximity gestures. The dual CapSense hardware blocks inside the PSoC 4200L device enables you to scan the CapSense Gesture Pad and the proximity sensors simultaneously. Industry’s First Dual-Arduino Compatible Development Platform The PSoC 4 L-Series Pioneer Kit is the industry’s first development platform that features footprint to connect two Arduino Uno compatible shields side-by-side. This hardware flexibility allows you to use two user interface shields or two shields sharing the same communication protocols in the same design. Snap-away Arduino Shield The PSoC 4 L-Series Pioneer Kit lets you snap-off the extended shield board and use it as an Arduino Shield with any Arduino Uno compatible development kit. The snapped-off shield features a 13-element CapSense Gesture Pad, two proximity headers, footprint for EZBLE PRoC module, Energy Harvesting Power Management IC PMIC , Serial NOR flash and µSD card socket. If you want to use the snapped-off shield back with the PSoC 4 L-Series Pioneer Kit, you can plug it into the Arduino header on the main board or into the 52-pin header on the edge of the main board, enabling you to use the kit with full features, yet again. Flexible Prototyping The PSoC 4 L-Series Pioneer Kit features a wide variety of peripherals such as full-speed USB device, stereo codec, 1Mb F-RAM, an RGB LED and footprints for EZ-BLE PRoC module, Energy Harvesting Power Management IC PMIC , Serial NOR flash, µSD card socket and a coin cell battery. Additionally, the kit also includes the Cypress KitProg, an on-board programmer and debugger for the PSoC devices. Kit Contents: PSoC 4 L-Series pioneer board USB standard-A to Mini-B cable Four jumper wires 4 inches each Two proximity sensor wires 5 inches each Stereo audio earphone with microphone Quick Start Guide 1/19/2016

PDF Datasheet Preview

CY8CKIT-046 4 L-Series Pioneer Kit

Last Updated Jan 12, 2016 Version **

The 4 L-Series Pioneer Kit is a low-cost hardware and software platform to enable design and debug of the PSoC 4200L device. Coming soon!

Featuring PSoC 4200L Device

The PSoC 4 L-Series Pioneer Kit features the PSoC 4200L device - industry’s most flexible 32-bit solution. The PSoC 4200L device is a member of the PSoC 4 L-Series device family with up to 256KB flash, 98 GPIOs, 13 programmable analog blocks, 20 programmable digital blocks, dual hardware blocks, full-speed USB, DMA and CAN.

Industry’s Best and Simplest CapSense

The PSoC 4 L-Series Pioneer Kit features a 13-element CapSense Gesture Pad and two CapSense proximity headers that allows you to quickly implement and evaluate touch-based and proximity gestures. The dual CapSense hardware blocks inside the PSoC 4200L device enables you to scan the CapSense Gesture Pad and the proximity sensors simultaneously.

Industry’s First Dual-Arduino Compatible Development Platform

The PSoC 4 L-Series Pioneer Kit is the industry’s first development platform that features footprint to connect two Arduino Uno compatible shields side-by-side. This hardware flexibility allows you to use two user interface shields or two shields sharing the same communication protocols in the same design.

Snap-away Arduino Shield

The PSoC 4 L-Series Pioneer Kit lets you snap-off the extended shield board and use it as an Arduino Shield with any Arduino Uno compatible development kit. The snapped-off shield features a 13-element CapSense Gesture Pad, two proximity headers, footprint for EZBLE PRoC module, Energy Harvesting Power Management IC PMIC , Serial NOR flash and µSD card socket.

If you want to use the snapped-off shield back with the PSoC 4 L-Series Pioneer Kit, you can plug it into the Arduino header on the main board or into the 52-pin header on the edge of the main board, enabling you to use the kit with full features, yet again.

Flexible Prototyping

The PSoC 4 L-Series Pioneer Kit features a wide variety of peripherals such as full-speed USB device, stereo codec, 1Mb F-RAM, an RGB LED and footprints for EZ-BLE PRoC module, Energy Harvesting Power Management IC PMIC , Serial NOR flash, µSD card socket and a coin cell battery.

Additionally, the kit also includes the Cypress KitProg, an on-board programmer and debugger for the PSoC devices.

Kit Contents:

PSoC 4 L-Series pioneer board USB standard-A to Mini-B cable Four jumper wires 4 inches each Two proximity sensor wires 5 inches each Stereo audio earphone with microphone Quick Start Guide
1/19/2016

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CY8CKIT-046 Datasheet file may be downloaded here without warranties.

Datasheet ID: CY8CKIT-046 508178