CY7C1020B-12ZXC

CY7C1020B-12ZXC Datasheet


CY7C1020B

Part Datasheet
CY7C1020B-12ZXC CY7C1020B-12ZXC CY7C1020B-12ZXC (pdf)
Related Parts Information
CY7C1020B-12VXCT CY7C1020B-12VXCT CY7C1020B-12VXCT
CY7C1020B-12ZXCT CY7C1020B-12ZXCT CY7C1020B-12ZXCT
CY7C1020B-15ZXCT CY7C1020B-15ZXCT CY7C1020B-15ZXCT
CY7C1020B-12VXC CY7C1020B-12VXC CY7C1020B-12VXC
PDF Datasheet Preview
CY7C1020B
32K x 16 Static RAM

ROW DECODER A8 A9 A10 A11 A12 A13 A14

SENSE AMPS
• High speed tAA = 12, 15 ns
• CMOS for optimum speed/power
• Low active power
825 mW max.
• Low CMOS standby power
mW max.
• Automatic power-down when deselected
• Independent control of upper and lower bits
• Available in lead-free and non-lead-free 44-pin TSOP II
and 44-pin 400-mil SOJ packages

Functional Description

The CY7C1020B is a high-performance CMOS static RAM organized as 32,768 words by 16 bits. This device has an automatic power-down feature that significantly reduces power consumption when deselected.

Logic Block Diagram

DATA IN DRIVERS
32K x 16

RAM Array

COLUMN DECODER

Writing to the device is accomplished by taking Chip Enable CE and Write Enable WE inputs LOW. If Byte Low Enable BLE is LOW, then data from I/O pins I/O1 through I/O8 , is written into the location specified on the address pins A0 through A14 . If Byte High Enable BHE is LOW, then data from I/O pins I/O9 through I/O16 is written into the location specified on the address pins A0 through A14 .

Reading from the device is accomplished by taking Chip Enable CE and Output Enable OE LOW while forcing the Write Enable WE HIGH. If Byte Low Enable BLE is LOW, then data from the memory location specified by the address pins will appear on I/O1 to I/O8. If Byte High Enable BHE is LOW, then data from memory will appear on I/O9 to I/O16. See the truth table at the back of this data sheet for a complete description of read and write modes.

The input/output pins I/O1 through I/O16 are placed in a high-impedance state when the device is deselected CE HIGH , the outputs are disabled OE HIGH , the BHE and BLE are disabled BHE, BLE HIGH , or during a write operation CE LOW, and WE LOW .

The CY7C1020B is available in standard 44-pin TSOP Type II and 44-pin 400-mil-wide SOJ packages.

BHE WE CE OE BLE

Pin Configuration

SOJ / TSOP II Pinout Top View

A3 2 A2 3 A1 4 A0 5 CE 6 I/O1 7 I/O2 8 I/O3 9

I/O4 10 VCC 11 VSS 12 I/O5 13 I/O6 14 I/O7 15 I/O8 16 WE 17

A4 18 A14 19 A13 20 A12 21 NC 22
44 A5 43 A6
42 A7 41 OE
40 BHE 39 BLE
38 I/O16 37 I/O15 36 I/O14 35 I/O13 34 VSS 33 VCC 32 I/O12 31 I/O11 30 I/O10 29 I/O9 28 NC 27 A8 26 A9 25 A10 24 A11 23 NC

Selection Guide

Maximum Access Time ns Maximum Operating Current mA Maximum CMOS Standby Current mA

CY7C1020B-12 140 3

CY7C1020B-15 130 3

Cypress Semiconductor Corporation
• 198 Champion Court
• San Jose, CA 95134-1709
• 408-943-2600
[+] Feedback

CY7C1020B

Maximum Ratings

Above which the useful life may be impaired. For user guidelines, not tested. Storage Temperature to +150°C

Current into Outputs 20 mA

Static Discharge >2001V per MIL-STD-883, Method 3015
Ordering Information

Speed ns 12
Ordering Code CY7C1020B-12VC CY7C1020B-12VXC CY7C1020B-12ZC CY7C1020B-12ZXC CY7C1020B-15ZC CY7C1020B-15ZXC

Package Diagrams

Package Diagram 51-85082
51-85087
51-85087

Package Type 44-pin 400-Mil Molded SOJ 44-pin 400-Mil Molded SOJ Pb-free 44-pin TSOP Type II 44-pin TSOP Type II Pb-free 44-pin TSOP Type II 44-pin TSOP Type II Pb-free
44-pin 400-Mil Molded SOJ 51-85082

CY7C1020B

Operating Range

Commercial
51-85082-*B

Page 7 of 9 [+] Feedback

Package Diagrams continued
44-pin TSOP II 51-85087

CY7C1020B
51-85087-*A

All product and company names mentioned in this document may be the trademarks of their respective holders.

Page 8 of 9

Cypress Semiconductor Corporation, The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use
of any circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended to be
used for medical, life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its
products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress
products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges.
[+] Feedback

CY7C1020B

Document History Page

Document Title CY7C1020B 32K x 16 Static RAM Document # 38-05171

Issue ECN NO. Date

Orig. of Change Description of Change
115439 05/09/02

DSG New Data Sheet
116869 08/21/02

DFP Added L-Power Specifications.
426747 See ECN ZSD Changed the address of Cypress Semiconductor Corporation on Page #1
from “3901 North First Street” to “198 Champion Court”.

Added thermal resistance table.
Updated the ordering information table and replaced the Package Name
column with Package Diagram.
465909 See ECN NXR Corrected typo in Pin Configuration Changed A15 to A4

Removed L-Power Specifications
Updated the Ordering Information table

Page 9 of 9 [+] Feedback
More datasheets: ATR2406-PNQG 86 | ATR2406-PNSG | ATR2406-PNQG | FAN5240QSC | FAN5240MTCX | FAN5240QSCX | FAN5240MTC | FAN1112SX | FAN1112DX | CY7C1020B-12VXCT


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CY7C1020B-12ZXC Datasheet file may be downloaded here without warranties.

Datasheet ID: CY7C1020B-12ZXC 507885