CY3650
CY3650 Datasheet
CY3650 USB Development System
| Part | Datasheet |
|---|---|
CY3650 |
CY3650 (pdf) |
| PDF Datasheet Preview |
|---|
| CY3650 USB Development System User’s Guide Version June 30, 1999 DOCUMENT HISTORY PAGE Document Title USB Development System User’s Guide Document Number: ECN NO. ISSUE DATE ORIG. OF CHANGE DESCRIPTION OF CHANGE Preliminary Release 9/27/96 TIW Update switches, I/O, misc., 24pin pkg 11/20/96 JDW Update switches, pin list, suspend 6/17/97 TEN Modified to incorporate CY7C6341x and CY7C6351x 7/30/97 TEN Changed J1 odd pins to even and even to odd. Expanded explanation of serial buffer size 12/16/97 TEN Fixed Table 7, J2 Pin 30 changed from “MR_” duplicate to “MW_” 2/27/98 TEN Added TOC plus a number of changes and corrections 6/30/99 TEN Changed Cypress Logo to be part of file CY3650 USB Development System User’s Guide Overview. 1 Kit Contents 2 Hardware Installation 2 Power Connection 3 Jumpers 3 Ribbon Cable connectors J1 and J2 3 PC Communication 3 Switch Settings 4 Software Installation 5 Operation 5 Differences between the chip and the development board 5 Firmware ROM vs. RAM operation 5 PC debug interface. 6 I/O Port operation 6 Suspend Mode 7 Reset. 7 USB Interface 7 Pin Descriptions 7 Target Chip and Connector J1 8 J2 - Microcontroller Signals 8 J3 - RS232 Connector 10 CY3650 USB Development System User’s Guide CY3650 USB Development System User’s Guide Overview Wall Bug Logic Analyzer RS-232 Development Board Target System Figure Typical USB Development Environment Stand-alone mode Figure 2 allows portable system operation. In this case, user firmware is loaded in EPROM, and only power need be applied to produce a fully operating emulated USB chip. Wall Bug Development Board Target System Figure Stand-alone Environment |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CY3650 Datasheet file may be downloaded here without warranties.