CY3265C-RGB

CY3265C-RGB Datasheet

CY3265-RGB Evaluation Kit Guide

Part	Datasheet
CY3265C-RGB	CY3265C-RGB (pdf)

Related Parts	Information
CY3265O-RGB	CY3265O-RGB

PDF Datasheet Preview
CY3265-RGB Evaluation Kit Guide Cypress Semiconductor 198 Champion Court San Jose, CA 95134-1709 Phone USA Phone Intnl : Copyrights Cypress Semiconductor Corporation, The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use of any circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended to be used for medical, life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its products for use as critical components in lifesupport systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges. Any Source Code software and/or firmware is owned by Cypress Semiconductor Corporation Cypress and is protected by and subject to worldwide patent protection United States and foreign , United States copyright laws and international treaty provisions. Cypress hereby grants to licensee a personal, non-exclusive, non-transferable license to copy, use, modify, create derivative works of, and compile the Cypress Source Code and derivative works for the sole purpose of creating custom software and/or firmware in support of licensee product to be used only in conjunction with a Cypress integrated circuit as specified in the applicable agreement. Any reproduction, modification, translation, compilation, or representation of this Source Code except as specified above is prohibited without the express written permission of Cypress. Disclaimer CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Cypress reserves the right to make changes without further notice to the materials described herein. Cypress does not assume any liability arising out of the application or use of any product or circuit described herein. Cypress does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress’ product in a life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges. Use may be limited by and subject to the applicable Cypress software license agreement. PrISM , EZ-Color , PSoC Designer , Programmable System-on-Chip , and PSoC Express are trademarks and is a registered trademark of Cypress Semiconductor Corp. All other trademarks or registered trademarks referenced herein are property of the respective corporations. Flash Code Protection Cypress products meet the specifications contained in their particular Cypress PSoC Data Sheets. Cypress believes that its family of PSoC products is one of the most secure families of its kind on the market today, regardless of how they are used. There may be methods, unknown to Cypress, that can breach the code protection features. Any of these methods, to our knowledge, would be dishonest and possibly illegal. Neither Cypress nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as "unbreakable." Cypress is willing to work with the customer who is concerned about the integrity of their code. Code protection is constantly evolving. We at Cypress are committed to continuously improving the code protection features of our products. Contents Introduction Purpose Install Software Application Guide Installation Installing the Application Uninstalling the Application Introduction Representing Colors Status Running the Application with no RGB Unit Attached LED Luminous Flux Dynamic Update Shutting Down the Application Color Accuracy Finding Calibration Setting Primary Color Coordinates Building a new RGB firmware image Saving the File Rebuilding your firmware Loading your new firmware Using PSoC Designer Using PSoC Designer Contents Introduction WARNING HIGH BRIGHTNESS LEDs CAN CAUSE PERMANENT EYE DAMAGE! Do not look at the LEDs if they are not covered by the protective enclosure. The LEDs illuminate at a very high intensity and can cause permanent eye damage if they are viewed without the protective enclosure. Purpose The CY3265-RGB Evaluation Kit demonstrates the ability of an EZ-Color controller to control three primary, high brightness LEDs and create accurate, mixed-color output. The three LEDs in the CY3265 evaluation unit use the primary colors red, green, and blue, although any three primary color LEDs can be used in a design, depending upon the application and the desired color gamut. Right out of the box, CY3265-RGB Evaluation kit can be used to evaluate and demonstrate EZ-Color functionality, including color mixing. See the quick start on how to use the kit with the factory installed firmware. This guide serves two main purposes Chapter on page 5 discusses kit contents, installation instructions, and MiniProg. Chapter Application on page 9 discusses the Intelligent Lighting Control application. Chapter Color on page 17 discusses the Color Accuracy, Primary Color Coordi- nates, and Building RGB Firmware. Install Software Install the CY3265-RGB Kit Software Insert the CY3265-RGB Kit CD. Open Intelligent Lighting Control.msi. Follow the Setup Wizard instructions. Install the Latest Version of PSoC Programmer To ensure you have the latest version of PSoC Programmer Launch PSoC Programmer. Select Help About PSoC Programmer. Note the version number and click OK. Introduction Click Check for Updates. PSoC Programmer launches your web browser and opens the PSoC Programmer web site. Compare the PSoC Programmer version number you noted in Step to the latest version available on the web site. If the version on the web site is newer, click Download, and install the newest version. Install the PSoC MiniProg Ensure all content on the Tools CD is installed. Plug the MiniProg into your PC via the USB cable. If this is the first time you have connected the PSoC MiniProg, the Windows Found New Hardware Wizard opens. If the Windows Found New Hardware Wizard does not open, then the PSoC MiniProg software is already installed and you do not need to continue with these instructions. Select the No, not this time option button, and click Next. Select the Install from a list or specific location Advanced option button and click Next. Select the Don't search. I will choose the driver to install option button, and click Next. Select the USB Mini Programmer x.x.x.x driver and click Next. When prompted that the USB Mini Programmer x.x.x.x software has not passed Windows Logo Testing, click Continue Anyway. When Windows has completed the installation, click Finish. Introduction RGB Unit Layout

PDF Datasheet Preview

CY3265-RGB Evaluation Kit Guide

Cypress Semiconductor 198 Champion Court

San Jose, CA 95134-1709 Phone USA Phone Intnl :

Copyrights

Cypress Semiconductor Corporation, The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use of any circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended to be used for medical, life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its products for use as critical components in lifesupport systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges.

Any Source Code software and/or firmware is owned by Cypress Semiconductor Corporation Cypress and is protected by and subject to worldwide patent protection United States and foreign , United States copyright laws and international treaty provisions. Cypress hereby grants to licensee a personal, non-exclusive, non-transferable license to copy, use, modify, create derivative works of, and compile the Cypress Source Code and derivative works for the sole purpose of creating custom software and/or firmware in support of licensee product to be used only in conjunction with a Cypress integrated circuit as specified in the applicable agreement. Any reproduction, modification, translation, compilation, or representation of this Source Code except as specified above is prohibited without the express written permission of Cypress.

Disclaimer CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Cypress reserves the right to make changes without further notice to the materials described herein. Cypress does not assume any liability arising out of the application or use of any product or circuit described herein. Cypress does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress’ product in a life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges.

Use may be limited by and subject to the applicable Cypress software license agreement.

PrISM , EZ-Color , PSoC Designer , Programmable System-on-Chip , and PSoC Express are trademarks and is a registered trademark of Cypress Semiconductor Corp. All other trademarks or registered trademarks referenced herein are property of the respective corporations.

Flash Code Protection

Cypress products meet the specifications contained in their particular Cypress PSoC Data Sheets. Cypress believes that its family of PSoC products is one of the most secure families of its kind on the market today, regardless of how they are used. There may be methods, unknown to Cypress, that can breach the code protection features. Any of these methods, to our knowledge, would be dishonest and possibly illegal. Neither Cypress nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as "unbreakable."

Cypress is willing to work with the customer who is concerned about the integrity of their code. Code protection is constantly evolving. We at Cypress are committed to continuously improving the code protection features of our products.

Contents

Introduction

Purpose Install Software

Application Guide

Installation Installing the Application Uninstalling the Application

Introduction Representing Colors Status Running the Application with no RGB Unit Attached LED Luminous Flux Dynamic Update Shutting Down the Application

Color Accuracy

Finding Calibration Setting Primary Color Coordinates Building a new RGB firmware image

Saving the File Rebuilding your firmware Loading your new firmware Using PSoC Designer Using PSoC Designer

Contents

Introduction

WARNING HIGH BRIGHTNESS LEDs CAN CAUSE PERMANENT EYE DAMAGE!

Do not look at the LEDs if they are not covered by the protective enclosure. The LEDs illuminate at a very high intensity and can cause permanent eye damage if they are viewed without the protective enclosure.

Purpose

The CY3265-RGB Evaluation Kit demonstrates the ability of an EZ-Color controller to control three primary, high brightness LEDs and create accurate, mixed-color output. The three LEDs in the CY3265 evaluation unit use the primary colors red, green, and blue, although any three primary color LEDs can be used in a design, depending upon the application and the desired color gamut. Right out of the box, CY3265-RGB Evaluation kit can be used to evaluate and demonstrate EZ-Color functionality, including color mixing. See the quick start on how to use the kit with the factory installed firmware. This guide serves two main purposes Chapter on page 5 discusses kit contents, installation instructions, and MiniProg. Chapter Application on page 9 discusses the Intelligent Lighting Control application. Chapter Color on page 17 discusses the Color Accuracy, Primary Color Coordi-
nates, and Building RGB Firmware.

Install Software

Install the CY3265-RGB Kit Software

Insert the CY3265-RGB Kit CD. Open Intelligent Lighting Control.msi. Follow the Setup Wizard instructions.

Install the Latest Version of PSoC Programmer

To ensure you have the latest version of PSoC Programmer Launch PSoC Programmer. Select Help About PSoC Programmer. Note the version number and click OK.

Introduction

Click Check for Updates. PSoC Programmer launches your web browser and opens the PSoC Programmer web site.

Compare the PSoC Programmer version number you noted in Step to the latest version available on the web site. If the version on the web site is newer, click Download, and install the newest version.

Install the PSoC MiniProg

Ensure all content on the Tools CD is installed. Plug the MiniProg into your PC via the USB cable. If this is the first time you have connected the

PSoC MiniProg, the Windows Found New Hardware Wizard opens. If the Windows Found New Hardware Wizard does not open, then the PSoC MiniProg software is already installed and you do not need to continue with these instructions. Select the No, not this time option button, and click Next. Select the Install from a list or specific location Advanced option button and click Next. Select the Don't search. I will choose the driver to install option button, and click Next. Select the USB Mini Programmer x.x.x.x driver and click Next. When prompted that the USB Mini Programmer x.x.x.x software has not passed Windows Logo Testing, click Continue Anyway. When Windows has completed the installation, click Finish.

Introduction

RGB Unit Layout

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CY3265C-RGB Datasheet file may be downloaded here without warranties.

Datasheet ID: CY3265C-RGB 507779