CY3203A-CAPSENSE

CY3203A-CAPSENSE Datasheet

CY3203A-CapSense Kit Quick Start

Part	Datasheet
CY3203A-CAPSENSE	CY3203A-CAPSENSE (pdf)

PDF Datasheet Preview
CY3203A-CapSense Kit Quick Start Cypress Semiconductor 198 Champion Court San Jose, CA 95134-1709 Phone USA Phone Intnl : Copyrights Copyrights Cypress Semiconductor Corporation, The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use of any circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended to be used for medical, life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its products for use as critical components in lifesupport systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges. Any Source Code software and/or firmware is owned by Cypress Semiconductor Corporation Cypress and is protected by and subject to worldwide patent protection United States and foreign , United States copyright laws and international treaty provisions. Cypress hereby grants to licensee a personal, non-exclusive, non-transferable license to copy, use, modify, create derivative works of, and compile the Cypress Source Code and derivative works for the sole purpose of creating custom software and or firmware in support of licensee product to be used only in conjunction with a Cypress integrated circuit as specified in the applicable agreement. Any reproduction, modification, translation, compilation, or representation of this Source Code except as specified above is prohibited without the express written permission of Cypress. Disclaimer CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Cypress reserves the right to make changes without further notice to the materials described herein. Cypress does not assume any liability arising out of the application or use of any product or circuit described herein. Cypress does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress’ product in a life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges. Use may be limited by and subject to the applicable Cypress software license agreement. PSoC Designer , Programmable System-on-Chip , and PSoC Express are trademarks and is a registered trademark of Cypress Semiconductor Corp. All other trademarks or registered trademarks referenced herein are property of the respective corporations.> Flash Code Protection Cypress products meet the specifications contained in their particular Cypress PSoC Data Sheets. Cypress believes that its family of PSoC products is one of the most secure families of its kind on the market today, regardless of how they are used. There may be methods, unknown to Cypress, that can breach the code protection features. Any of these methods, to our knowledge, would be dishonest and possibly illegal. Neither Cypress nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as "unbreakable." Cypress is willing to work with the customer who is concerned about the integrity of their code. Code protection is constantly evolving. We at Cypress are committed to continuously improving the code protection features of our products. Contents Getting Started Install PSoC Express Development Additional Content on CY3203-CapSense Board Details Use the Board as Factory Programmed Power the Board Test the Board Resetting the Board to the Original Factory Programming Create a CapSense Project Start a New Add a CSA Slider Driver to Your Design Add an LCD Value Driver to Your Define the LCD Transfer Function Build Your Project Assign Drivers to Program the CY3203 Board Test the Board What’s Next? Tune a CapSense Project Open You PSoC Express Project Add an I2C Slave Driver to Your Design Build the Assign Drivers to Program the CY3203 Board Tune the Slider Design Support and Resources PSoC Development Software PSoC Data Sheets and Application PSoC Device Selector PSoC Development Tools Selector PSoC On-Demand Training PSoC On-Site Training Online Technical Support Additional CapSense Resources Contents Getting Started Install PSoC Express Development Software Insert the PSoC Development Software Suite CD into your CD-ROM drive. Install PSoC Express. Install .NET Framework Install PSoC Programmer. Install Express Pak For the latest versions of all Cypress software, go to Additional Content on CD Kit Documentation Application Notes Design Files Schematics Getting Started CY3203-CapSense Board Details LCD: 16x2 Dot Matrix LCD. Hitachi 44780 compatible model. LCD DB4 LCD DB5 LCD DB6 LCD DB7 LCD E LCD RS LCD R/W ISSP Connector J2 : In-System Serial Programmer ISSP connector. Connect MiniProg for Programming or I2C USB Bridge for monitoring. Data, Clock, Ground and VDD are all labeled. Data is routed to P1[0] and Clock is routed to P1[1].

PDF Datasheet Preview

CY3203A-CapSense Kit Quick Start

Cypress Semiconductor 198 Champion Court

San Jose, CA 95134-1709 Phone USA Phone Intnl :

Copyrights

Copyrights

Cypress Semiconductor Corporation, The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use of any circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended to be used for medical, life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its products for use as critical components in lifesupport systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges.

Any Source Code software and/or firmware is owned by Cypress Semiconductor Corporation Cypress and is protected by and subject to worldwide patent protection United States and foreign , United States copyright laws and international treaty provisions. Cypress hereby grants to licensee a personal, non-exclusive, non-transferable license to copy, use, modify, create derivative works of, and compile the Cypress Source Code and derivative works for the sole purpose of creating custom software and or firmware in support of licensee product to be used only in conjunction with a Cypress integrated circuit as specified in the applicable agreement. Any reproduction, modification, translation, compilation, or representation of this Source Code except as specified above is prohibited without the express written permission of Cypress.

Disclaimer CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Cypress reserves the right to make changes without further notice to the materials described herein. Cypress does not assume any liability arising out of the application or use of any product or circuit described herein. Cypress does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress’ product in a life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges.

Use may be limited by and subject to the applicable Cypress software license agreement.

PSoC Designer , Programmable System-on-Chip , and PSoC Express are trademarks and is a registered trademark of Cypress Semiconductor Corp. All other trademarks or registered trademarks referenced herein are property of the respective corporations.>

Flash Code Protection

Cypress products meet the specifications contained in their particular Cypress PSoC Data Sheets. Cypress believes that its family of PSoC products is one of the most secure families of its kind on the market today, regardless of how they are used. There may be methods, unknown to Cypress, that can breach the code protection features. Any of these methods, to our knowledge, would be dishonest and possibly illegal. Neither Cypress nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as "unbreakable."

Cypress is willing to work with the customer who is concerned about the integrity of their code. Code protection is constantly evolving. We at Cypress are committed to continuously improving the code protection features of our products.

Contents

Getting Started

Install PSoC Express Development Additional Content on

CY3203-CapSense Board Details

Use the Board as Factory Programmed

Power the Board Test the Board Resetting the Board to the Original Factory Programming

Create a CapSense Project

Start a New Add a CSA Slider Driver to Your Design Add an LCD Value Driver to Your Define the LCD Transfer Function Build Your Project Assign Drivers to Program the CY3203 Board Test the Board What’s Next?

Tune a CapSense Project

Open You PSoC Express Project Add an I2C Slave Driver to Your Design Build the Assign Drivers to Program the CY3203 Board Tune the Slider

Design Support and Resources

PSoC Development Software PSoC Data Sheets and Application PSoC Device Selector PSoC Development Tools Selector PSoC On-Demand Training PSoC On-Site Training Online Technical Support Additional CapSense Resources

Contents

Getting Started

Install PSoC Express Development Software

Insert the PSoC Development Software Suite CD into your CD-ROM drive. Install PSoC Express. Install .NET Framework Install PSoC Programmer. Install Express Pak

For the latest versions of all Cypress software, go to

Additional Content on CD

Kit Documentation Application Notes Design Files Schematics

Getting Started

CY3203-CapSense Board Details

LCD:
16x2 Dot Matrix LCD. Hitachi 44780 compatible model.

LCD DB4 LCD DB5 LCD DB6 LCD DB7

LCD E LCD RS LCD R/W

ISSP Connector J2 :

In-System Serial Programmer ISSP connector. Connect MiniProg for Programming or I2C USB Bridge for monitoring.

Data, Clock, Ground and VDD are all labeled. Data is routed to P1[0] and Clock is routed to P1[1].

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CY3203A-CAPSENSE Datasheet file may be downloaded here without warranties.

Datasheet ID: CY3203A-CAPSENSE 507772