CY7C63000A CY7C63001A CY7C63100A CY7C63101A USB Microcontroller Datasheet

CY7C63000A CY7C63001A CY7C63100A CY7C63101A Universal Serial Bus Microcontroller

Features
• Low-cost solution for low-speed USB peripherals such as mouse, joystick, and gamepad
• USB Specification Compliance - Conforms to USB 1.5 Mbps Specification, Version 1.1 - Supports 1 device address and 2 endpoints (1 control endpoint and 1 data endpoint)
• 8-bit RISC microcontroller - Harvard architecture - 6-MHz external ceramic resonator - 12-MHz internal operation - USB optimized instruction set
• Internal memory - 128 bytes of RAM - 2 Kbytes of EPROM (CY7C63000A, CY7C63100A) - 4 Kbytes of EPROM (CY7C63001A, CY7C63101A)
• I/O ports - Integrated USB transceiver - Up to 16 Schmitt trigger I/O pins with internal pull-up - Up to 8 I/O pins with LED drive capability - Special purpose I/O mode supports optimization of photo transistor and LED in mouse application - Maskable Interrupts on all I/O pins
• 8-bit free-running timer
• Watch dog timer (WDT)
• Internal power-on reset (POR)
• Instant-On Now for Suspend and Periodic Wake-up Modes
• Improved output drivers to reduce EMI
• Operating voltage from 4.0V to 5.25 VDC
• Operating temperature from 0 to 70 degree Celsius
• Available in space saving and low cost 20-pin PDIP, 20-pin SOIC, 24-pin SOIC and 24-pin QSOP packages
• Industry standard programmer support

The CY7C63000A CY7C63001A CY7C63100A CY7C63101A is a family of 8-bit RISC One Time Programmable (OTP) microcontrollers with a built-in 1.5-Mbps USB Serial Interface Engine (SIE). The microcontroller features 35 instructions that are optimized for USB applications. In addition, the microcontroller features 128 bytes of internal RAM and either 2 or 4 Kbytes of program memory space. The Cypress USB Controller accepts a 6-MHz ceramic resonator as its clock source. This clock signal is doubled within the chip to provide a 12MHz clock for the microprocessor. The microcontroller features two ports of up to sixteen general purpose I/Os (GPIOs). Each GPIO pin can be used to generate an interrupt to the microcontroller. Additionally, all pins in Port 1 are equipped with programmable drivers strong enough to drive LEDs. The GPIO ports feature low EMI emissions as a result of controlled rise and fall times and unique output driver circuits.

The Cypress microcontrollers have a range of GPIOs to fit various applications the CY7C6300XA has twelve GPIOs and the CY7C6310XA has sixteen GPIOs. Notice that each part has eight ‘low-current’ ports (Port 0) with the remaining ports (Port 1) being ‘high-current’ ports. The twelve GPIO CY7C6300XA is available in 20-pin PDIP (-PC) and 20-pin SOIC (-SC) packages. The sixteen GPIO CY7C6310XA is available in 24-pin SOIC (-SC) and 24-pin QSOP (-QC) packages.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CY7C63000A CY7C63001A CY7C63100A CY7C63101A USB Microcontroller Datasheet file may be downloaded here without warranties.