CSQ-706BS

CSQ-706BS Datasheet

Part No CSQ-706BS Description magnetic buzzer

Part	Datasheet
CSQ-706BS	CSQ-706BS (pdf)

PDF Datasheet Preview
Part No CSQ-706BS Description magnetic buzzer Date 10/04/2006 Unit mm Page No 1 of 5 Specifications Rated voltage Operating voltage Mean current Coil resistance Coil impedance Sound output Rated frequency Operating tempurature Storage tempurature Dimensions Weight Material RoHS Vo-p ~ Vo-p 90 mA max. Min. 90 Typical 95 dBA 2,000 Hz -20 ~ +60° C -30 ~ +70° C x H3.8 mm g Noryl SE1-J no Frequency Response Curve Applying rated voltage, 2000 Hz square wave, duty Distance at 5cm A-weight free air . Applying rated voltage of 2000 Hz, square wave, duty. See attached drawing Phone Fax 20050 SW 112th Ave. Tualatin, OR 97062 Appearance Drawing Tolerance: Part No CSQ-706BS Description magnetic buzzer Date 10/04/2006 Unit mm Page No 2 of 5 Phone Fax 20050 SW 112th Ave. Tualatin, OR 97062 Measurement Method Part No CSQ-706BS Description magnetic buzzer Date 10/04/2006 Unit mm Page No 3 of 5 Mechanical Characteristics Item Vibration Drop Test Test Condition Evaluation Standard The buzzer will be measured after applying a vibration amplitude of mm 9.3G with After the test, the part shall meet 10 to 55 to 10 Hz band of vibration frequency to specifications without any each of the 3 perpendicular directions for 2 damage to the appearance and hours. the SPL should be within ±10 The part is to be dropped from a height of dBA of the initial SPL. 75 cm onto a 40 mm thick wooden board 3 times in 3 axis X, Y, Z for a total of 9 drops. Phone Fax 20050 SW 112th Ave. Tualatin, OR 97062 Environment Test

PDF Datasheet Preview

Part No CSQ-706BS Description magnetic buzzer

Date 10/04/2006 Unit mm Page No 1 of 5

Specifications

Rated voltage Operating voltage Mean current

Coil resistance Coil impedance Sound output

Rated frequency Operating tempurature Storage tempurature Dimensions Weight Material RoHS

Vo-p
~ Vo-p 90 mA max.

Min. 90 Typical 95 dBA
2,000 Hz -20 ~ +60° C -30 ~ +70° C x H3.8 mm g Noryl SE1-J no

Frequency Response Curve

Applying rated voltage, 2000 Hz square wave, duty

Distance at 5cm A-weight free air . Applying rated voltage of 2000 Hz, square wave, duty.

See attached drawing

Phone Fax 20050 SW 112th Ave. Tualatin, OR 97062

Appearance Drawing

Tolerance:

Part No CSQ-706BS Description magnetic buzzer

Date 10/04/2006 Unit mm Page No 2 of 5

Phone Fax 20050 SW 112th Ave. Tualatin, OR 97062

Measurement Method

Part No CSQ-706BS Description magnetic buzzer

Date 10/04/2006 Unit mm Page No 3 of 5

Mechanical Characteristics

Item Vibration

Drop Test

Test Condition

Evaluation Standard

The buzzer will be measured after applying
a vibration amplitude of mm 9.3G with After the test, the part shall meet
10 to 55 to 10 Hz band of vibration frequency to specifications without any
each of the 3 perpendicular directions for 2
damage to the appearance and
hours.
the SPL should be within ±10

The part is to be dropped from a height of
dBA of the initial SPL.
75 cm onto a 40 mm thick wooden board 3
times in 3 axis X, Y, Z for a total of 9 drops.

Phone Fax 20050 SW 112th Ave. Tualatin, OR 97062

Environment Test

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CSQ-706BS Datasheet file may be downloaded here without warranties.

Datasheet ID: CSQ-706BS 507414