212P0112N332RA

212P0112N332RA Datasheet

SPEC NO. EN-SPE-212001A

Part	Datasheet
212P0112N332RA	212P0112N332RA (pdf)

PDF Datasheet Preview
DIGI-KEY 08/15/06’ CTS COMPONENTS TAIWAN, LTD. ENGINEERING SPECIFICATION SPEC NO. EN-SPE-212001A SPECIFICATION : PAGE OF 212 SERIES SELECTOR SWITCH 03-19-02’ 1 OF 2 THIS SPECIFICATION APPLIES TO THE SELECTOR SWITCH 212 SERIES （ROTARY AND CUSTOMER CONFIGURATION OPERATING TEMPERATURE -20 ºC TO +110 ºC STORAGE TEMPERATURE -20 ºC TO +110 ºC MECHANICAL BUMP SPRING HILL AND VALLEY DETENT WITH 30º INDEXING FOR 2 THROUGH 12 POSITIONS OR CONTINUOUS ROTATION DETENT ROTATIONAL CYCLES THRU 12 POSITIONS AND RETURN AT 10 CYCLES PER MINUTE REQUIRED UP TO 48 inch. oz kg-cm STOP inch-lbs（17 • ALUM BRASS WITH NI-PLATED BRASS WITH ZINC PLATED BRASS WITH NI-PLATED • BRASS BRASS WITH ZINC PLATED DETENT STEEL SILVER PLATED PHOSOPHER BRONZE SILVER PLATED BRASS STANDARD GLASS REINFORCED PPA UL FLAME CLASS 94V-0 ROTOR AND ROTOR NYLON 66 UL FLAME CLASS 94V-2 ITEM ADDED WRITTEN BY S.M.TSAI APPROVED BY T.J.LEE *CTS T F-013 08-02-05 SM 03-19-02 ML DATE BY SYM DATE BY CUSTOMER : GENERAL DISTRIBUTION : CTS COMPONENTS TAIWAN, LTD. ENGINEERING SPECIFICATION SPEC NO. EN-SPE-212001A SPECIFICATION : PAGE OF 212 SERIES SELECTOR SWITCH 03-19-02’ 2 OF 2 ELECTRICAL CONTACT OHMS MAX MEASURED FROM ONE TERMINAL TO AN ADJACENT TERMINAL.（WHEN IS NOT ADJACENT, UP TO 180º APART, WILL MEASURE MUCH HIGHER DUE TO THE EXTRA METAL IN THE CIRCUIT RESISTANCE CHECK MEASURE ALL THE METAL IN THE CIRCUIT. CONTACT THROUGH 12 POSITIONS AND RETURN WITHOUT APPRECIABLE RISE IN CONTACT RESISTANCE 50,000 CYCLES 10,000 CYCLES

PDF Datasheet Preview

DIGI-KEY 08/15/06’

CTS COMPONENTS TAIWAN, LTD.

ENGINEERING SPECIFICATION

SPEC NO. EN-SPE-212001A

SPECIFICATION :

PAGE OF
212 SERIES SELECTOR SWITCH
03-19-02’
1 OF 2

THIS SPECIFICATION APPLIES TO THE SELECTOR SWITCH 212 SERIES （ROTARY AND CUSTOMER CONFIGURATION

OPERATING TEMPERATURE -20 ºC TO +110 ºC STORAGE TEMPERATURE -20 ºC TO +110 ºC

MECHANICAL

BUMP SPRING HILL AND VALLEY DETENT WITH 30º INDEXING FOR 2 THROUGH 12 POSITIONS OR CONTINUOUS ROTATION

DETENT ROTATIONAL CYCLES THRU 12 POSITIONS AND RETURN AT 10 CYCLES PER MINUTE

REQUIRED UP TO 48 inch. oz kg-cm

STOP inch-lbs（17
• ALUM BRASS WITH NI-PLATED BRASS WITH ZINC PLATED

BRASS WITH NI-PLATED
• BRASS

BRASS WITH ZINC PLATED

DETENT STEEL SILVER PLATED PHOSOPHER BRONZE SILVER PLATED BRASS STANDARD GLASS REINFORCED PPA UL FLAME CLASS 94V-0 ROTOR AND ROTOR NYLON 66 UL FLAME CLASS 94V-2

ITEM ADDED

WRITTEN BY S.M.TSAI

APPROVED BY T.J.LEE *CTS T F-013
08-02-05 SM
03-19-02 ML

DATE BY SYM

DATE BY

CUSTOMER :

GENERAL

DISTRIBUTION :

CTS COMPONENTS TAIWAN, LTD.

ENGINEERING SPECIFICATION

SPEC NO. EN-SPE-212001A

SPECIFICATION :

PAGE OF
212 SERIES SELECTOR SWITCH
03-19-02’
2 OF 2

ELECTRICAL

CONTACT OHMS MAX MEASURED FROM ONE TERMINAL TO AN ADJACENT TERMINAL.（WHEN IS NOT ADJACENT, UP TO 180º APART, WILL MEASURE MUCH HIGHER DUE TO THE EXTRA METAL IN THE CIRCUIT RESISTANCE CHECK MEASURE ALL THE METAL IN THE CIRCUIT.

CONTACT THROUGH 12 POSITIONS AND RETURN WITHOUT APPRECIABLE RISE IN CONTACT RESISTANCE 50,000 CYCLES 10,000 CYCLES

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 212P0112N332RA Datasheet file may be downloaded here without warranties.

Datasheet ID: 212P0112N332RA 518743