QASP5M220A-L

QASP5M220A-L Datasheet

QAS SERIES

Part	Datasheet
QASP5M220A-L	QASP5M220A-L (pdf)

Related Parts	Information
QCS20S110AL	QCS20S110AL
QASP100S110ADL	QASP100S110ADL
QASP100S24ADL	QASP100S24ADL
QASP60S220ADL	QASP60S220ADL
QAS2S110ADL	QAS2S110ADL
QASP10S110ADL	QASP10S110ADL
QASP5M220ADL	QASP5M220ADL
QASP10S24ADL	QASP10S24ADL
QAS1S110ADL	QAS1S110ADL
QCS20M110AL	QCS20M110AL
QCS10S110AL	QCS10S110AL
QCS20S220AL	QCS20S220AL
QAS4M220ADL	QAS4M220ADL
QDS45S220A	QDS45S220A
QHS12H110A	QHS12H110A
QASP20M220A	QASP20M220A
QCS20S110A	QCS20S110A
QASP5M220AL	QASP5M220AL
QAS120M220A	QAS120M220A
QDS45S110A	QDS45S110A

PDF Datasheet Preview
TIMERS GENERAL DETAILS OF TYPE Q TIMERS Q series timers are compact, low cost, precision devices designed to the most demanding specifications. The small size, epoxy filled case is highly resistant against dust, vibrations, shock and humidity. Creep and strike distance according to VDE 0110 Group C 250V. Case protection IP66. Case material - Phenolic. 50.8mm 50.8mm TIMERS 250 DIA. MALE QUICK CONNECT TERMINALS QAS SERIES DELAY ON MAKE ELECTRONIC TIMER UL listed CSA recognized SPECIFICATIONS: Input Power 24 VAC/DC, 110 VAC/DC 220 VAC/DC ±15%, 50/60 Hz Output Rating max. A at 20°C min. 10 mA Voltage drop after timing VAC/DC Repetition accuracy at a constant ambient Temp rise derating 5 mA / °C Reset time SAS & SAS-D 25 ms after timing 50 ms during timing Leakage current during timing 5 mA max Peak surge current 20 A < 10 ms Peak surge voltage 1400 V, 10 µs Terminals 6.35mm quick connect Operating temperature -22°F to +140°F -30°C to +60°C Weight oz. 55g Peak Surge Current 100A 50A 20A 15A 10A Peak Surge Current vs Surge Current Duration 2A 1A 10ms 20ms 50ms 100ms 200ms 500ms 1s 2s 5s Surge Current Duration ORDERING INFORMATION 100 pcs. minimum P.S. Specify maximum time for “D” and “P” version. MOUNTING AS-D SERIES Input Power S1 Function A: Delay on Make Output Function A When input power is applied, timing t begins. At the end of the preselected time, the solid state SCR output turns on. The output turns off when the input power is removed, resetting the timer for the next cycle. WIRING DIAGRAM: QAS-D 470K +- +- LOAD LOAD INPUT INPUT Note Available with internal potentiometer in AS-P Series 100S TIME RANGE 220 AD INPUT POWER Q = Encapsulated AS = fixed time AS-D = remote potentiometer AS-P = internal potentiometer AS = Fixed sec - 120 min AS-D = sec - 60 min. 10:1 Ratio AS-P = sec - 10 sec 1-100 sec maintain 100:1 ratio 24AD = 24 VAC/DC 110AD = 110 VAC/DC 220AD = 220 VAC/DC 1 AMP 2/46a Products and specifications subject to change without notice. Order/Technical Support Tel 800 677-5311 / FAX 800 677-3865 / TIMERS QBS SERIES SINGLE SHOT TIMER QCS SERIES DELAY ON BREAK TIMER UL listed CSA recognized • CMOS Technology • Epoxy Encapsulated • x Compact Size • Quick Connect Terminals TIMERS Input Power S1 ORDERING INFORMATION 100 pcs. minimum DIMENSIONS See page 4-34 MOUNTING SERIES TIME RANGE 110A INPUT POWER Q = Encapsulated 2/46b CS = Fixed time BS = Fixed time CS-D = Remote potentiometer BS-D = Remote potentiometer CS-P = Internal potentiometer BS-P = Internal potentiometer CS/BS = Fixed time CS-D = sec. - 120 min BS-D = sec. - 120 min. maintain 10:1 ratio B or CSP = - 10 sec. or min 1 - 100 sec. or min. maintain 100:1 ratio 24A = 24 VAC 48A = 48 VAC 110A = 110 VAC 220A = 220 VAC Products and specifications subject to change without notice. Order/Technical Support Tel 800 677-5311 / FAX 800 677-3865 / 1 AMP TIMERS QDS SERIES REPEAT CYCLE QHS SERIES INTERVAL ELECTRONIC TIMER UL listed CSA recognized • Consistent Repeat Cycle • Multiple Voltage • Square Cases • Fixed and Variable Time Ranges TIMERS Function D: Function H: Function H The solid state output turns on when the input power Recycling Interval Timer S1 is applied. The output turns off at the end of time T . The timer Input is reset when the input power is removed. Power S1 Function D When input power S1 is applied, the sold state output Output turns on immediately for the time period specified. It then turns OFF T1 T2 t for that same time period and repeats continuously while power is applied. SPECIFICATIONS: Input 24 VAC, 48 VAC, 110 VAC 220 VAC, ±15%, 50/60 Hz Maximum power consumption 24 VAC VA 48 VAC VA 110 VAC VA 220 VAC VA ORDERING INFORMATION 100 pcs. minimum DIMENSIONS See page 4-34 MOUNTING SERIES 10 min TIME RANGE INPUT POWER Q = Encapsulated DS = Fixed time DS-D = Remote potentiometer HS = Fixed time HS-D = Remote potentiometer DS-P = Internal potentiometer HS-P = Internal potentiometer DS/HS = Fixed .1s - 120 min. DS-D/HS-D = sec - 120 min. maintaining 10:1 ratio DS-P/HS-P = sec or min 1-100 sec. or min. maintain 100:1 ratio 24A = 24 VAC 48A = 48 VAC 110A = 110 VAC 220A = 220 VAC 1 AMP 2/46c Products and specifications subject to change without notice. Order/Technical Support Tel 800 677-5311 / FAX 800 677-3865 /

PDF Datasheet Preview

TIMERS

GENERAL DETAILS OF TYPE Q TIMERS

Q series timers are compact, low cost, precision devices designed to the most demanding specifications. The small size, epoxy filled case is highly resistant against dust, vibrations, shock and humidity. Creep and strike distance according to VDE 0110 Group C 250V. Case protection IP66. Case material - Phenolic.
50.8mm
50.8mm

TIMERS
250 DIA. MALE QUICK CONNECT TERMINALS

QAS SERIES

DELAY ON MAKE ELECTRONIC TIMER

UL listed CSA recognized

SPECIFICATIONS:

Input Power 24 VAC/DC, 110 VAC/DC 220 VAC/DC ±15%, 50/60 Hz

Output Rating max. A at 20°C min. 10 mA

Voltage drop after timing VAC/DC Repetition accuracy at a constant ambient Temp rise derating 5 mA / °C Reset time SAS & SAS-D 25 ms after timing
50 ms during timing Leakage current during timing 5 mA max Peak surge current 20 A < 10 ms Peak surge voltage 1400 V, 10 µs Terminals 6.35mm quick connect Operating temperature -22°F to +140°F -30°C to +60°C Weight oz. 55g

Peak Surge Current
100A 50A
20A 15A 10A

Peak Surge Current vs Surge Current Duration
2A 1A
10ms 20ms 50ms 100ms 200ms 500ms 1s 2s 5s Surge Current Duration
ORDERING INFORMATION 100 pcs. minimum

P.S. Specify maximum time for “D” and “P” version.

MOUNTING

AS-D

SERIES

Input Power S1

Function A:

Delay on Make

Output

Function A When input power is applied, timing t begins. At the end of the preselected time, the solid state SCR output turns on. The output turns off when the input power is removed, resetting the timer for the next cycle.

WIRING DIAGRAM:

QAS-D
470K
+- +-

LOAD

LOAD

INPUT

INPUT

Note Available with internal potentiometer in AS-P Series
100S

TIME RANGE
220 AD

INPUT POWER

Q = Encapsulated

AS = fixed time AS-D = remote potentiometer AS-P = internal potentiometer

AS = Fixed sec - 120 min AS-D = sec - 60 min. 10:1 Ratio AS-P = sec - 10 sec
1-100 sec maintain 100:1 ratio
24AD = 24 VAC/DC 110AD = 110 VAC/DC 220AD = 220 VAC/DC
1 AMP
2/46a

Products and specifications subject to change without notice.

Order/Technical Support Tel 800 677-5311 / FAX 800 677-3865 /

TIMERS

QBS SERIES

SINGLE SHOT TIMER

QCS SERIES

DELAY ON BREAK TIMER

UL listed CSA recognized
• CMOS Technology
• Epoxy Encapsulated
• x Compact Size
• Quick Connect Terminals

TIMERS

Input Power S1
ORDERING INFORMATION 100 pcs. minimum

DIMENSIONS See page 4-34

MOUNTING

SERIES

TIME RANGE
110A

INPUT POWER

Q = Encapsulated 2/46b

CS = Fixed time BS = Fixed time CS-D = Remote potentiometer BS-D = Remote potentiometer CS-P = Internal potentiometer BS-P = Internal potentiometer

CS/BS = Fixed time CS-D = sec. - 120 min BS-D = sec. - 120 min. maintain 10:1 ratio B or CSP = - 10 sec. or min
1 - 100 sec. or min. maintain 100:1 ratio
24A = 24 VAC 48A = 48 VAC 110A = 110 VAC 220A = 220 VAC

Products and specifications subject to change without notice.

Order/Technical Support Tel 800 677-5311 / FAX 800 677-3865 /
1 AMP

TIMERS

QDS SERIES

REPEAT CYCLE

QHS SERIES

INTERVAL ELECTRONIC TIMER

UL listed CSA recognized
• Consistent Repeat Cycle
• Multiple Voltage
• Square Cases
• Fixed and Variable Time Ranges

TIMERS

Function D:

Function H:

Function H The solid state output turns on when the input power

Recycling

Interval Timer

S1 is applied. The output turns off at the end of time T . The timer

Input
is reset when the input power is removed.

Power S1

Function D When input power S1 is applied, the sold state output

Output
turns on immediately for the time period specified. It then turns OFF

T1 T2
t for that same time period and repeats continuously while power is
applied.

SPECIFICATIONS:

Input 24 VAC, 48 VAC, 110 VAC 220 VAC, ±15%, 50/60 Hz

Maximum power consumption 24 VAC VA 48 VAC VA 110 VAC VA 220 VAC VA
ORDERING INFORMATION 100 pcs. minimum

DIMENSIONS See page 4-34

MOUNTING

SERIES
10 min

TIME RANGE

INPUT POWER

Q = Encapsulated

DS = Fixed time DS-D = Remote potentiometer

HS = Fixed time HS-D = Remote potentiometer DS-P = Internal potentiometer HS-P = Internal potentiometer

DS/HS = Fixed .1s - 120 min. DS-D/HS-D = sec - 120 min. maintaining 10:1 ratio DS-P/HS-P = sec or min
1-100 sec. or min. maintain 100:1 ratio
24A = 24 VAC 48A = 48 VAC 110A = 110 VAC 220A = 220 VAC
1 AMP
2/46c

Products and specifications subject to change without notice.

Order/Technical Support Tel 800 677-5311 / FAX 800 677-3865 /

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived QASP5M220A-L Datasheet file may be downloaded here without warranties.

Datasheet ID: QASP5M220A-L 507184