DIART24A

DIART24A Datasheet


The DIAR.T is a current control which is capable of sensing up to 100 Amps. If requires a stepdown transformer, T1 The transformer has a diameter center hole through which a current carrying lead is routed. Automatic or manual unlatching is available in each unit. AC Current Control Without Latching:

Part Datasheet
DIART24A DIART24A DIART24A (pdf)
Related Parts Information
74525305 74525305 74525305
LIART110A LIART110A LIART110A
LIART24D LIART24D LIART24D
LIART24A LIART24A LIART24A
LIART220A LIART220A LIART220A
DIART110A DIART110A DIART110A
DIART220A DIART220A DIART220A
DIART24D DIART24D DIART24D
PDF Datasheet Preview
CONTROLS

IAR.T SERIES

CURRENT CONTROL RELAY

UL listed CSA recognized
• Automatic or Manual Control
• Start-up Inhibit
• Adjustable Hysteresis
• Multiple Voltages
• 5 to 100 Amp RMS

CONTROLS

The DIAR.T is a current control which is capable of sensing up to 100 Amps. If requires a stepdown transformer, T1 The transformer has a diameter center hole through which a current carrying lead is routed. Automatic or manual unlatching is available in each unit. AC Current Control Without Latching:

The output relay is energized when the AC current overshoots the level selected on the potentiometer. It de-energizes when the current falls below the selected current by 5 to 50% or when input power breaks. The hysteresis is controlled by a top mounted potentiometer and its selection does not change the chosen current level. AC Current Control With Latching The output relay is energized when the current reaches the selected value and stays latched. The contact between terminal B1 and B2 or 11 and 9 should be opened or input power to the device interrupted to reset. In this case, it is preferable to reduce the hysteresis

SPECIFICATIONS:

Input 24 VDC, 24, 48, 110, 220 VAC
±15%, 50/60 Hz

Power consumption 3 VA maximum

Hysteresis selection 5 to 50% of input current

Repeat accuracy ±2% at a constant ambient
±5% with temperature variation

VDE 0435

Response time 100 ms On Make
200 ms On Break

Output Relay SPDT Relay

Contact material AgCdO

Maximum loading 10 A AC resistive 1 A DC inductive

Maximum switching voltage 250 VAC
30 VDC

Relay maximum power rating 2500 VA

Mechanical life of relay 30 x 104 operations

Electrical life of relay 2 x 105 at 2500 VA resistive load

Operating temperature +14°F to +140°F -10°C to +60°C

Weight 7 oz. 200g

TRANSFORMER Part Number 74 525 305

Current Range 5 to 100 A RMS
48 mm

Maximum Overload 1 max = 150 A

S1 Threshold
hysteresis

Automatic Unlatching

S1 S2 Threshold
hysteresis

Manual Unlatching

WIRING DIAGRAM:

DIAR-T

A1 11 E1
ORDERING INFORMATION:

MOUNTING

IAR.T

SERIES
110A

INPUT POWER

MOUNTING D = DIN-rail mounting L = 11 pin plug-in

SERIES IAR.T

INPUT POWER 24D = 24VDC 48A = 48VAC 24A = 24VAC 110A = 110VAC
220A = 220VAC

Products and specifications subject to change without notice.

Consult factory for application assistance.
204 Airline Drive, Suite 300, Coppell, Texas 75019 / Tel 800 677-5311 / FAX 800 677-3865 / 5-22
More datasheets: AF512UFNDNC(I)-OEM | 26043 | AK4114VQ | PS-2214-L NS PA | 74525305 | LIART110A | LIART24D | LIART24A | LIART220A | DIART110A


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived DIART24A Datasheet file may be downloaded here without warranties.

Datasheet ID: DIART24A 507164