84872040

84872040 Datasheet

Part	Datasheet
84872040	84872040 (pdf)

Related Parts	Information
84872056	84872056
84872047	84872047
84872046	84872046
84872057	84872057

PDF Datasheet Preview
CONTROLS CONTROLS EUS and EUSF SERIES VOLTAGE CONTROL RELAY UL cUL listed • Units Check Their Own Supply Voltage Level • EUS SERIES Over or Under Voltage Selectable • EUSF SERIES Monitors High and Low Voltage • Space Saving 22.5mm Wide DIN-Rail / Surface Mount OPERATING PRINCIPLE: MODE OF OPERATION: EUS SERIES EUS VOLTAGE CONTROL WITHOUT MEMORY Control of AC / DC voltage without memory When the value of the controlled voltage, AC or DC, reaches the threshold Unit power-up Ue displayed on the front face, the output relay changes state at the end of a time delay T which can be set on the front face at between and 3 s. Threshold Ue Hysteresis Once the voltage drops below 5 to 50% of the threshold hysteresis , the Controlled voltage output relay changes state again instantly. Changing the hysteresis on the UPPER function front face does not therefore modify the value of the preset threshold. Control of AC / DC voltage with memory Hysteresis Threshold Ue Controlled voltage When the value of the controlled voltage, AC or DC, reaches the threshold Ue displayed on the front face, the output relay changes state at the end of a time delay T which can be set on the front face at between and 3 s, UNDER function and stays locked in this position. VOLTAGE CONTROL WITH MEMORY EUSF SERIES Unit power-up The EUSF window threshold relay monitors an electrical voltage which acts as its own power supply simplified wiring . When the value of the controlled voltage, AC or DC, goes outside the window, the output relay deenergises at the end of a time delay T which can be set on the front face at between Threshold Ue Hysteresis memory Controlled voltage and 3 s. It switches back on when the voltage returns within the window and stays UPPER function Hysteresis Controlled voltage ORDERING INFORMATION: 84 872 040 84 872 046 84 872 047 84 872 056 84 872 057 Type EUS EUSF Supply Voltage 12 VDC 20 to 80 VAC/VDC 90 to 270 VAC/VDC 20 to 80 VAC/VDC 90 to 270 VAC/VDC Products and specifications subject to change without notice. Consult factory for application assistance. 72 100 204 Airline Drive, Suite 300, Coppell, Texas 75019 / Tel 800 677-5311 / FAX 800 677-3865 / 5-25

PDF Datasheet Preview

CONTROLS

CONTROLS

EUS and EUSF SERIES

VOLTAGE CONTROL RELAY

UL cUL listed
• Units Check Their Own Supply Voltage Level
• EUS SERIES Over or Under Voltage Selectable
• EUSF SERIES Monitors High and Low Voltage
• Space Saving 22.5mm Wide DIN-Rail / Surface Mount

OPERATING PRINCIPLE:

MODE OF OPERATION:

EUS SERIES

EUS VOLTAGE CONTROL WITHOUT MEMORY

Control of AC / DC voltage without memory

When the value of the controlled voltage, AC or DC, reaches the threshold

Unit power-up

Ue displayed on the front face, the output relay changes state at the end of
a time delay T which can be set on the front face at between and 3 s.

Threshold Ue

Hysteresis

Once the voltage drops below 5 to 50% of the threshold hysteresis , the

Controlled voltage
output relay changes state again instantly. Changing the hysteresis on the

UPPER function
front face does not therefore modify the value of the preset threshold. Control of AC / DC voltage with memory

Hysteresis Threshold Ue

Controlled voltage

When the value of the controlled voltage, AC or DC, reaches the threshold Ue displayed on the front face, the output relay changes state at the end of a time delay T which can be set on the front face at between and 3 s,

UNDER function
and stays locked in this position.

VOLTAGE CONTROL WITH MEMORY

EUSF SERIES

Unit power-up

The EUSF window threshold relay monitors an electrical voltage which acts
as its own power supply simplified wiring . When the value of the controlled voltage, AC or DC, goes outside the window, the output relay deenergises at the end of a time delay T which can be set on the front face at between

Threshold Ue Hysteresis
memory

Controlled voltage
and 3 s. It switches back on when the voltage returns within the window and stays

UPPER function Hysteresis

Controlled voltage
ORDERING INFORMATION:
84 872 040 84 872 046 84 872 047 84 872 056 84 872 057

Type

EUS EUSF

Supply Voltage
12 VDC 20 to 80 VAC/VDC 90 to 270 VAC/VDC 20 to 80 VAC/VDC 90 to 270 VAC/VDC

Products and specifications subject to change without notice.

Consult factory for application assistance.
72 100
204 Airline Drive, Suite 300, Coppell, Texas 75019 / Tel 800 677-5311 / FAX 800 677-3865 / 5-25

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 84872040 Datasheet file may be downloaded here without warranties.

Datasheet ID: 84872040 507163