84873016

84873016 Datasheet

84873010

Part	Datasheet
84873016	84873016 (pdf)

Related Parts	Information
84873011	84873011
84873015	84873015

PDF Datasheet Preview
CONTROLS FW SERIES PHASE CONTROL RELAY UL cUL listed CSA recognized •Monitors and Protects Against •Rugged Construction for Over Voltage and Transient Protection CONTROLS GENERAL FEATURES: OPERATING PRINCIPLE: The unit has two front dial settings. The upper dial is used for the In a 3-phase network, the FW simultaneously monitors phase three phase nominal voltage settings that exists in the application. sequencing, loss of phase with a maximum regeneration rate The lower dial setting is for an adjustable time delay to prevent nuisance tripping of the unit. The FW has a space saving 45mm wide DIN-rail mount/surface mount enclosure and LED power-on and relay status indication. of 70% of the displayed by a potentiometer on the front face, and the voltage drop on the 3 phases of less than 15% of the preset value. When the 3 phases suceed one another, the output relay is activated and indicated via a yellow LED. The output relay de-energizes LED off after a time delay T, SPECIFICATIONS: Model No. 84873010 84873011 84873015 84873016 adjustable between and 10 seconds on the front face, if one of the following faults is present : Input Power 3 x 230VAC 3 x 380VAC 3 x 480VAC 3 x 600VAC Threshold Adjustment 184 - 264VAC 310 - 337VAC 384 - 552VAC 460 - 661VAC Maximum Voltage 264VAC 337VAC 552VAC 661VAC - absence of one or more phases - voltage drop Minimum Voltage Frequency 184VAC 50/60 Hz 304VAC 50/60 Hz 384VAC 460VAC 50/60 Hz 50/60 Hz CONFORMITY: Max. Power Consumption 6 VA [Powered from L1 & L2] Immunity from micro power cuts 10 ms Immunity to interference and noise EMC IEC Surge immunity Level 3 Delay on pick-up 500 ms IEC Electrostatic discharges Level 3 Isolation coordination Category III Degree of pollution 2 acc. to IEC 664-1 VDE 0110 4 KV/2 IEC Damped oscillated waves Level 3 IEC Radiated disturbance Level 3 IEC Fast transient Level 3 Measurement input resistance 1 x input power ORDERING INFORMATION: Voltage 3 x 230 VAC 3 x 380 VAC 3 x 480 VAC 3 x 600 VAC 84873010 84873011 84873015 84873016 Products and specifications subject to change without notice. Consult factory for application assistance. 95 100 204 Airline Drive, Suite 300, Coppell, Texas 75019 / Tel 800 677-5311 / FAX 800 677-3865 / 5-13

PDF Datasheet Preview

CONTROLS

FW SERIES

PHASE CONTROL RELAY

UL cUL listed CSA recognized
•Monitors and Protects Against
•Rugged Construction for Over Voltage and Transient Protection

CONTROLS

GENERAL FEATURES:

OPERATING PRINCIPLE:

The unit has two front dial settings. The upper dial is used for the

In a 3-phase network, the FW simultaneously monitors phase
three phase nominal voltage settings that exists in the application.
sequencing, loss of phase with a maximum regeneration rate

The lower dial setting is for an adjustable time delay to prevent nuisance tripping of the unit. The FW has a space saving 45mm wide DIN-rail mount/surface mount enclosure and LED power-on and relay status indication.
of 70% of the displayed by a potentiometer on the front face, and the voltage drop on the 3 phases of less than 15% of the preset value. When the 3 phases suceed one another, the output relay is activated and indicated via a yellow LED. The output relay de-energizes LED off after a time delay T,

SPECIFICATIONS:

Model No.
84873010
84873011
84873015 84873016
adjustable between and 10 seconds on the front face, if one of the following faults is present :

Input Power
3 x 230VAC 3 x 380VAC 3 x 480VAC 3 x 600VAC

Threshold Adjustment 184 - 264VAC 310 - 337VAC 384 - 552VAC 460 - 661VAC

Maximum Voltage
264VAC
337VAC
552VAC 661VAC
- absence of one or more phases - voltage drop

Minimum Voltage Frequency
184VAC 50/60 Hz
304VAC 50/60 Hz
384VAC 460VAC 50/60 Hz 50/60 Hz

CONFORMITY:

Max. Power Consumption 6 VA [Powered from L1 & L2] Immunity from micro power cuts 10 ms

Immunity to interference and noise EMC IEC Surge immunity Level 3

Delay on pick-up 500 ms

IEC Electrostatic discharges Level 3

Isolation coordination Category III Degree of pollution 2 acc. to IEC 664-1 VDE 0110 4 KV/2

IEC Damped oscillated waves Level 3 IEC Radiated disturbance Level 3 IEC Fast transient Level 3

Measurement input resistance 1 x input power
ORDERING INFORMATION:

Voltage
3 x 230 VAC 3 x 380 VAC 3 x 480 VAC 3 x 600 VAC
84873010 84873011 84873015 84873016

Products and specifications subject to change without notice.

Consult factory for application assistance.
95 100
204 Airline Drive, Suite 300, Coppell, Texas 75019 / Tel 800 677-5311 / FAX 800 677-3865 / 5-13

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 84873016 Datasheet file may be downloaded here without warranties.

Datasheet ID: 84873016 507090