IL-SM2144NH-I

IL-SM2144NH-I Datasheet

iL-SM2144NH-I

Part	Datasheet
IL-SM2144NH-I	IL-SM2144NH-I (pdf)

PDF Datasheet Preview
Nano SocketLAN Nano SocketLAN Data Sheet Ver. International Connect One Ltd. 20 Atir Yeda Street Kfar Saba 44643, Israel Phone +972-9-766-0456 Fax +972-9-766-0461 Email: Pub. No. 11-4200-05, Copyright Connect One, July All rights reserved. USA 560 S. Winchester Blvd. Suite 500 San Jose, CA 95128 Tel 408 572-5675 Fax 408 572-5601 Information provided by Connect One Ltd. is believed to be accurate and reliable. However, Connect One assumes no responsibility for its use, nor any infringement of patents or other rights of third parties, which may result from its use. No license is granted by implication or otherwise under any patent rights of Connect One other than for circuitry embodied in Connect One’s products. Connect One reserves the right to change circuitry at any time without notice. This document is subject to change without notice. The software described in this document is furnished under a license agreement and may be used or copied only in accordance with the terms of such a license agreement. It is forbidden by law to copy the software on any medium except as specifically allowed in the license agreement. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, including but not limited to photocopying, recording, transmitting via fax and/or modem devices, scanning, and/or information storage and retrieval systems for any purpose without the express written consent of Connect One. iChip, Nano SocketLAN, IP Communication Controller, SerialNET, AT+i and Connect One are trademarks of Connect One Ltd. Copyright 2009, Connect One Ltd. All rights reserved. Nano SocketLAN Data Sheet Connect One Version Date July 2009 July 2009 July 2009 July 2009 July 2009 Description Initial preliminary version Miscellaneous corrections Added resistor values for USB connector Updated Mechanical Dimensions Corrected part number Nano SocketLAN Data Sheet Connect One Contents Contents 1-1 General Description 1-1 Hardware 1-1 Performance Specifications 1-1 2-1 Protocols 2-1 Security 2-1 Additional Features 2-1 3 Typical Applications 3-1 4 Connector Pin Description 4-1 Pin 4-1 J8 Pin Functional 4-2 J9 Pin Functional 4-2 5-1 J8 Serial Interface 5-1 J9 SPI 5-1 J9 USB Interface 5-1 6 Electrical Specifications 6-2 Absolute Maximum Ratings 6-2 DC Operating Characteristics 6-2 AC Operating 6-3 7 Mechanical 7-4 8 Evaluation Board 8-1 9 Ordering Information 9-1 10 Internet Protocol Compliance 10-1 Nano SocketLAN Data Sheet Connect One Figures Figures Figure Pin-out for Nano SocketLAN Bottom View Figure SPI Interface Figure Mechanical Dimensions Nano SocketLAN Data Sheet Connect One Tables Tables Table 3-1 J8 Connector Signal Description Table 4-1 Absolute Maximum Table 4-2 DC Operating Characteristics Table Internet Protocol Nano SocketLAN Data Sheet Connect One Introduction 1 Introduction Nano SocketLAN is a secure serial-toLAN device server module that also acts as a bridge to connect serial devices to 10/100 Mbit Ethernet LANs. It includes the iChip CO2144 IP Communication Controller chip and a 10/100BaseT Ethernet PHY. The Nano SocketLAN is packaged in a RoHS-compliant compact form factor and uses a simple header connector for easy assembly or soldering. The Nano Socket LAN is Pin compatible with the Nano Socket iWiFi, allowing customers to design a single PCB for an easy switch between LAN and WiFi. Nano SocketLAN offers much more than many other device servers on the market. It acts as a security gap between the application and the network supports up to 10 simultaneous TCP/UDP sockets two listening sockets a web server with two websites SMTP and POP3 clients MIME attachments and TELNET clients, SerialNET mode for serial-to-IP bridging, and many more features. Nano SocketLAN supports the SSL3/TLS1 protocol for secure sockets, and Nano SocketLAN minimizes the need to redesign the host device hardware. It easily inserts into headers on the host PCB and includes an onboard RJ45 connector. Minimal or no software configuration is needed for Nano SocketLAN to access the LAN. Connect One’s high-level AT+i API eliminates the need to add security and networking protocols and tasks to the host application. The AT+i SerialNET operating mode offers a true plug-and-play mode that eliminates any changes to the host application. Nano SocketLAN firmware the IP stack and Internet configuration parameters are stored in an on-board flash memory. The module is power-efficient the core operates at 1.2V, while I/Os operate at 3.3V. Nano SocketLAN Data Sheet The II-EVB-363MS evaluation board provides an easy environment for testing the Nano SocketLAN prior to designing it into your product. Hardware Description Size x mm Core CPU Connect One CO2144, lowleakage, micron, clocked at 48MHz Operating Voltage +3.3V+/-10% Operating Humidity 90% maximum noncondensing Operating Temperature Range -40° to 85°C -40° to 185°F Power Consumption 130mA typical 30mA PHY shutdown Connector 2 x 10 pin header 2mm pitch Host Interface TTL Serial, SPI and USB device. 10/100BaseT Ethernet RoHS-compliant lead-free Performance Specifications Host Data Rate/Effective TCP throughput • Serial mode 3Mbps / 3Mbps • SPI mode 24Mbps / 5Mbps • USB mode 12Mbps / 500Kbps Serial Data Format AT+i mode Asynchronous character binary 8 data bits no parity 1 stop bit SerialNET mode Asynchronous character binary 7 or 8 data bits odd, even, or no parity 1, or 2 stop bits Flow Control Hardware -RTS, -CTS , software flow control or None. Connect One Internet Protocols ARP, ICMP, IP, UDP, TCP, DHCP, DNS, NTP, SMTP, POP3, MIME, and TELNET Security Protocols SSL3/TLS1, RSA, AES-128/256, 3DES, RC-4, SHA-1, MD-5, MD-2 Protocols Accelerated in HW AES, 3DES and SHA Application Program Interface Connect One’s AT+i protocol SerialNET mode for transparent serial data-to-Internet bridging Warranty Ordering Information 9 Ordering Information Ordering Information Part Number iL-SM2144NH-I Nano SocketLAN module, 2x10 pin header connector II-EVB-363MS-US110/220 Evaluation board for Nano SocketLAN. Includes Nano SocketLAN attached to a motherboard’s 2x10 pin header connector. The main board includes one male-female RS-232 DB-9 connector for high speed USART, RJ-45, USB, SPI and DC power connector. Specify 110V or 220V power supply. RoHS. Nano SocketLAN Data Sheet Connect One Protocol Compliance 10 Internet Protocol Compliance Nano SocketLAN complies with the Internet standards listed in the following table. RFC 768 RFC 791 RFC 792 RFC 793 RFC 821 RFC 822 RFC 826 RFC 959 RFC 854 RFC 857 RFC 858 RFC 1034 RFC 1035 RFC 1073 RFC 1091 RFC 1321 RFC 1939 RFC 1957 RFC 2030 RFC 2045 RFC 2046 RFC 2047 RFC 2048 RFC 2049 RFC 2068 RFC 2131 RFC 2132 RFC 2228 RFC 2246 User datagram protocol UDP Internet protocol IP ICMP Internet control message protocol Transmission control protocol TCP Simple mail transfer protocol SMTP Standard for the format of ARPA Internet text messages Ethernet address resolution protocol ARP File transfer protocol TELNET protocol specification Telnet ECHO option Telnet suppress go-ahead option Domain names DNS - concepts and facilities Domain names DNS - implementation and specification Telnet window size option Telnet terminal type option MD5 message digest algorithm Post office protocol - version 3 POP3 Some observations on the implementations of the post office protocol POP3 Simple network time protocol SNTP Multipurpose Internet mail extensions MIME part one internet message body format MIME part two media types MIME part three message header extensions for non-ASCII text MIME part four registration procedures MIME part five conformance criteria and examples Hypertext transfer protocol Dynamic host configuration protocol DHCP options only relevant parts security extensions The TLS protocol version Table Internet Protocol Compliance Nano SocketLAN Data Sheet 10-1

PDF Datasheet Preview

Nano SocketLAN

Nano SocketLAN

Data Sheet

Ver.

International Connect One Ltd. 20 Atir Yeda Street Kfar Saba 44643, Israel Phone +972-9-766-0456 Fax +972-9-766-0461

Email:

Pub. No. 11-4200-05, Copyright Connect One, July All rights reserved.

USA 560 S. Winchester Blvd. Suite 500 San Jose, CA 95128 Tel 408 572-5675 Fax 408 572-5601

Information provided by Connect One Ltd. is believed to be accurate and reliable. However, Connect One assumes no responsibility for its use, nor any infringement of patents or other rights of third parties, which may result from its use. No license is granted by implication or otherwise under any patent rights of Connect One other than for circuitry embodied in Connect One’s products. Connect One reserves the right to change circuitry at any time without notice. This document is subject to change without notice.

The software described in this document is furnished under a license agreement and may be used or copied only in accordance with the terms of such a license agreement. It is forbidden by law to copy the software on any medium except as specifically allowed in the license agreement. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, including but not limited to photocopying, recording, transmitting via fax and/or modem devices, scanning, and/or information storage and retrieval systems for any purpose without the express written consent of Connect One.
iChip, Nano SocketLAN, IP Communication Controller, SerialNET, AT+i and Connect One are trademarks of Connect One Ltd.

Copyright 2009, Connect One Ltd. All rights reserved.

Nano SocketLAN Data Sheet

Connect One

Version

Date July 2009 July 2009 July 2009 July 2009 July 2009

Description Initial preliminary version Miscellaneous corrections Added resistor values for USB connector Updated Mechanical Dimensions Corrected part number

Nano SocketLAN Data Sheet

Connect One

Contents

Contents
1-1 General Description 1-1 Hardware 1-1 Performance Specifications 1-1
2-1 Protocols 2-1 Security 2-1 Additional Features 2-1
3 Typical Applications 3-1
4 Connector Pin Description 4-1 Pin 4-1 J8 Pin Functional 4-2 J9 Pin Functional 4-2
5-1 J8 Serial Interface 5-1 J9 SPI 5-1 J9 USB Interface 5-1
6 Electrical Specifications 6-2 Absolute Maximum Ratings 6-2 DC Operating Characteristics 6-2 AC Operating 6-3
7 Mechanical 7-4
8 Evaluation Board 8-1
9 Ordering Information 9-1
10 Internet Protocol Compliance 10-1

Nano SocketLAN Data Sheet

Connect One

Figures

Figures

Figure Pin-out for Nano SocketLAN Bottom View Figure SPI Interface Figure Mechanical Dimensions

Nano SocketLAN Data Sheet

Connect One

Tables

Tables

Table 3-1 J8 Connector Signal Description Table 4-1 Absolute Maximum Table 4-2 DC Operating Characteristics Table Internet Protocol

Nano SocketLAN Data Sheet

Connect One

Introduction
1 Introduction

Nano SocketLAN is a secure serial-toLAN device server module that also acts as a bridge to connect serial devices to 10/100 Mbit Ethernet LANs. It includes the iChip CO2144 IP Communication Controller chip and a 10/100BaseT Ethernet PHY. The Nano SocketLAN is packaged in a RoHS-compliant compact form factor and uses a simple header connector for easy assembly or soldering.

The Nano Socket LAN is Pin compatible with the Nano Socket iWiFi, allowing customers to design a single PCB for an easy switch between LAN and WiFi.

Nano SocketLAN offers much more than many other device servers on the market. It acts as a security gap between the application and the network supports up to 10 simultaneous TCP/UDP sockets two listening sockets a web server with two websites SMTP and POP3 clients MIME attachments and TELNET clients, SerialNET mode for serial-to-IP bridging, and many more features.

Nano SocketLAN supports the SSL3/TLS1 protocol for secure sockets, and

Nano SocketLAN minimizes the need to redesign the host device hardware. It easily inserts into headers on the host PCB and includes an onboard RJ45 connector. Minimal or no software configuration is needed for Nano SocketLAN to access the LAN. Connect One’s high-level AT+i API eliminates the need to add security and networking protocols and tasks to the host application. The AT+i SerialNET operating mode offers a true plug-and-play mode that eliminates any changes to the host application.

Nano SocketLAN firmware the IP stack and Internet configuration parameters are stored in an on-board flash memory. The module is power-efficient the core operates at 1.2V, while I/Os operate at 3.3V.

Nano SocketLAN Data Sheet

The II-EVB-363MS evaluation board provides an easy environment for testing the Nano SocketLAN prior to designing it into your product.

Hardware Description

Size x mm Core CPU Connect One CO2144, lowleakage, micron, clocked at 48MHz Operating Voltage +3.3V+/-10% Operating Humidity 90% maximum noncondensing Operating Temperature Range -40° to 85°C -40° to 185°F Power Consumption 130mA typical
30mA PHY shutdown Connector 2 x 10 pin header 2mm pitch Host Interface TTL Serial, SPI and USB device. 10/100BaseT Ethernet RoHS-compliant lead-free

Performance

Specifications

Host Data Rate/Effective TCP throughput
• Serial mode 3Mbps / 3Mbps
• SPI mode 24Mbps / 5Mbps
• USB mode 12Mbps / 500Kbps

Serial Data Format AT+i mode Asynchronous character binary 8 data bits no parity 1 stop bit SerialNET mode Asynchronous character binary 7 or 8 data bits odd, even, or no parity 1, or 2 stop bits Flow Control Hardware -RTS, -CTS , software flow control or None.

Connect One

Internet Protocols

ARP, ICMP, IP, UDP, TCP, DHCP, DNS, NTP, SMTP, POP3, MIME, and TELNET

Security Protocols

SSL3/TLS1, RSA, AES-128/256, 3DES, RC-4, SHA-1, MD-5, MD-2

Protocols Accelerated in HW

AES, 3DES and SHA

Application Program Interface

Connect One’s AT+i protocol SerialNET mode for transparent serial data-to-Internet bridging

Warranty
Ordering Information
9 Ordering Information
Ordering Information Part Number
iL-SM2144NH-I

Nano SocketLAN module, 2x10 pin header connector

II-EVB-363MS-US110/220

Evaluation board for Nano SocketLAN. Includes Nano SocketLAN attached to a motherboard’s 2x10 pin header connector. The main board includes one male-female RS-232 DB-9 connector for high speed USART, RJ-45, USB, SPI and DC power connector. Specify 110V or 220V power supply. RoHS.

Nano SocketLAN Data Sheet

Connect One

Protocol Compliance
10 Internet Protocol Compliance

Nano SocketLAN complies with the Internet standards listed in the following table.

RFC 768 RFC 791 RFC 792 RFC 793 RFC 821 RFC 822 RFC 826 RFC 959 RFC 854 RFC 857 RFC 858 RFC 1034 RFC 1035 RFC 1073 RFC 1091 RFC 1321 RFC 1939 RFC 1957 RFC 2030

RFC 2045

RFC 2046 RFC 2047 RFC 2048 RFC 2049 RFC 2068 RFC 2131 RFC 2132 RFC 2228 RFC 2246

User datagram protocol UDP Internet protocol IP ICMP Internet control message protocol Transmission control protocol TCP Simple mail transfer protocol SMTP Standard for the format of ARPA Internet text messages Ethernet address resolution protocol ARP File transfer protocol TELNET protocol specification Telnet ECHO option Telnet suppress go-ahead option Domain names DNS - concepts and facilities Domain names DNS - implementation and specification Telnet window size option Telnet terminal type option MD5 message digest algorithm Post office protocol - version 3 POP3 Some observations on the implementations of the post office protocol POP3 Simple network time protocol SNTP Multipurpose Internet mail extensions MIME part one internet message body format MIME part two media types MIME part three message header extensions for non-ASCII text MIME part four registration procedures MIME part five conformance criteria and examples Hypertext transfer protocol Dynamic host configuration protocol DHCP options only relevant parts security extensions The TLS protocol version

Table Internet Protocol Compliance

Nano SocketLAN Data Sheet
10-1

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived IL-SM2144NH-I Datasheet file may be downloaded here without warranties.

Datasheet ID: IL-SM2144NH-I 506718