6STD15PCR99E10X

6STD15PCR99E10X Datasheet

/ max.40Ncm in.LB CONNECTOR IS PART MARKED 6STD15PoR99E10X CONEC ABC see note 4

Part	Datasheet
6STD15PCR99E10X	6STD15PCR99E10X (pdf)

PDF Datasheet Preview
NOTES b FOR WAVESOLDERING SOLDER BATH TEMPERATURE 240°C FOR 5 SEC. AND SOLDER PREHEAT 120°C FOR 120 SEC. METALSHELLS COPPER ALLOY min. 315µin TIN over 40-80µin NICKEL INSULATORS PBT GF UL 94 V-0, BLACK CONTACTS COPPER ALLOY PLATING SEE PART NO. : o PLEASE ADD C for 30µin HARD GOLD over min. 50µin NICKEL o PLEASE ADD B for 20µin HARD GOLD over min. 50µin NICKEL o PLEASE ADD A for GOLD FLASH over NICKEL PREFERRED TYPE THREADED SPACER CLIPS COPPER ALLOY; min. 200µin TIN over 80µin NICKEL +0,25 -0 PCB-HOLE PCB THICKNESS 1.6mm COLLARS COPPER ALLOY min. 200µin TIN over 80µin NICKEL FRAME ZINC DIE CAST NICKEL PLATED O-RING SILICON BLUE SEALING COMPOUND PUR BLUE RUBBER GASKET TPE BLACK HEXLOCKING SCREWS STAINLESS STEEL PCB HOLE DRILLINGS AND RECOMMENDED PANEL CUT-OUT ON SHEET 2 RECOMMENDED TORQUE FOR MOUNTING SCREW 35Ncm in.LB / max.40Ncm in.LB CONNECTOR IS PART MARKED 6STD15PoR99E10X CONEC ABC see note 4 + 0,12 - 0,18 47,7 +0,3 -0 33,3 +0,15 - 0,1 25,17 +0,2 - 0,05 SEALING COMPOUND D 8,26 0,22 0,03 RUBBER GASKET PLACED ON TOP SURFACE OF MALE INSULATOR +0,3 -0 21,1 10° n0,6 15x 5 7,9 O-RING M3 6STD15PoR99E10X CONEC ABC SEE NOTE 14 SEE NOTE 7 SW 4,75 Directive 2002/95/EC RoHS compliant AT ALL TIMES WATER RESISTANT CONNECTORS NOT IN USE SHOULD BE COVERED WITH A CONEC WATER RESISTANT CAP OR WATER TIGHT HOOD. THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH DO NOT ALTER CAD DRAWING BY HAND tolerance scale:

PDF Datasheet Preview

NOTES b

FOR WAVESOLDERING SOLDER BATH TEMPERATURE 240°C FOR 5 SEC.

AND SOLDER PREHEAT 120°C FOR 120 SEC.

METALSHELLS COPPER ALLOY min. 315µin TIN over 40-80µin NICKEL

INSULATORS PBT GF UL 94 V-0, BLACK

CONTACTS COPPER ALLOY PLATING SEE PART NO. :
o PLEASE ADD C for 30µin HARD GOLD over min. 50µin NICKEL
o PLEASE ADD B for 20µin HARD GOLD over min. 50µin NICKEL
o PLEASE ADD A for GOLD FLASH over NICKEL PREFERRED TYPE

THREADED SPACER CLIPS COPPER ALLOY;
min. 200µin TIN over 80µin NICKEL
+0,25 -0

PCB-HOLE PCB THICKNESS 1.6mm

COLLARS COPPER ALLOY min. 200µin TIN over 80µin NICKEL FRAME ZINC DIE CAST NICKEL PLATED O-RING SILICON BLUE SEALING COMPOUND PUR BLUE RUBBER GASKET TPE BLACK HEXLOCKING SCREWS STAINLESS STEEL PCB HOLE DRILLINGS AND RECOMMENDED PANEL CUT-OUT ON SHEET 2 RECOMMENDED TORQUE FOR MOUNTING SCREW 35Ncm in.LB
/ max.40Ncm in.LB CONNECTOR IS PART MARKED 6STD15PoR99E10X CONEC ABC see note 4
+ 0,12 - 0,18
47,7
+0,3 -0
33,3
+0,15 - 0,1
25,17
+0,2 - 0,05

SEALING COMPOUND D
8,26
0,22 0,03

RUBBER GASKET PLACED ON TOP SURFACE OF MALE INSULATOR
+0,3 -0
21,1
10° n0,6 15x
5 7,9

O-RING M3
6STD15PoR99E10X CONEC ABC

SEE NOTE 14

SEE NOTE 7

SW 4,75

Directive 2002/95/EC RoHS compliant

AT ALL TIMES WATER RESISTANT CONNECTORS NOT IN USE SHOULD BE COVERED WITH A CONEC WATER RESISTANT CAP OR WATER TIGHT HOOD.

THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH

DO NOT ALTER CAD DRAWING BY HAND
tolerance
scale:

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 6STD15PCR99E10X Datasheet file may be downloaded here without warranties.

Datasheet ID: 6STD15PCR99E10X 506675