15-000150

15-000150 Datasheet

15-000150

Part	Datasheet
15-000150	15-000150 (pdf)

PDF Datasheet Preview
+0,31 - 0,45 61,11 +0,13 - 0,12 52,5 0,05 0,2 5:1 D +0,37 - 0,39 15,38 +0,2 - 0,05 NOTE 2 JACKSCREW LANYARD ROTATES FREELY 10,81 +0,05 - 0,2 +0,1 -0 16,4 M3 4-40 UNC NOTE 11 Part. No. for plug connector WIRE ROPE n1,0 2x TERMINAL RING UNC 4-40 n3,2 15-000150 15-000200 THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH DO NOT ALTER CAD DRAWING BY HAND METALSHELLS COPPER ALLOY min. 315µin TIN over 40-80µin NICKEL TPE ETHYLENE PROPYLENE THERMOPLASTIC RUBBER SEAL IP RATING THE WATER RESISTANT CAP MUST BE MOUNTED PROPERLY TO THE MATING CONNECTOR FOR IP 67 THREADED INSERT COPPER ALLOY min. 200µin TIN over 80µin NICKEL COLLAR COPPER ALLOY min. 200µin TIN over 80µin NICKEL JACKSCREW STAINLESS STEEL WIRE ROPE STAINLESS STEEL RETAINING WASHER STAINLESS STEEL TERMINAL RING UNINSULATED, COPPER ALLOY min. 200µinTIN over 80µin NICKEL MAXIMUM TORQUE VALUE FOR THREAD 6in.LB CONNECTOR IS PART MARKED PART NO. CONEC ABC tolerance ISO 2768-m scale:

PDF Datasheet Preview

+0,31 - 0,45
61,11
+0,13 - 0,12
52,5
0,05 0,2
5:1 D
+0,37 - 0,39
15,38
+0,2 - 0,05

NOTE 2

JACKSCREW

LANYARD ROTATES FREELY
10,81
+0,05 - 0,2
+0,1 -0
16,4

M3 4-40 UNC

NOTE 11

Part. No. for plug connector

WIRE ROPE n1,0
2x TERMINAL RING

UNC 4-40
n3,2
15-000150
15-000200

THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH

DO NOT ALTER CAD DRAWING BY HAND

METALSHELLS COPPER ALLOY min. 315µin TIN over 40-80µin NICKEL

TPE ETHYLENE PROPYLENE THERMOPLASTIC RUBBER SEAL

IP RATING THE WATER RESISTANT CAP MUST BE MOUNTED

PROPERLY TO THE MATING CONNECTOR FOR IP 67

THREADED INSERT COPPER ALLOY min. 200µin TIN over 80µin NICKEL

COLLAR COPPER ALLOY min. 200µin TIN over 80µin NICKEL

JACKSCREW STAINLESS STEEL

WIRE ROPE STAINLESS STEEL

RETAINING WASHER STAINLESS STEEL

TERMINAL RING UNINSULATED, COPPER ALLOY min. 200µinTIN over 80µin NICKEL

MAXIMUM TORQUE VALUE FOR THREAD 6in.LB

CONNECTOR IS PART MARKED PART NO. CONEC ABC
tolerance ISO 2768-m
scale:

More datasheets: FMG2G200US60 | EB41P2121 | 1952 | 42-01035 | 42-01034 | 48PS | 120PS | 12PS | 12ES | DM74LS126AN

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 15-000150 Datasheet file may be downloaded here without warranties.

Datasheet ID: 15-000150 506504