SB140E-G

SB140E-G Datasheet

SB120E-G thru SB1100E-G

Part	Datasheet
SB140E-G	SB140E-G (pdf)

Related Parts	Information
SB1100E-G	SB1100E-G
SB160E-G	SB160E-G
SB120E-G	SB120E-G
SB180E-G	SB180E-G

PDF Datasheet Preview
Low VF/ESD Leaded Schottky Barrier Rectifiers SB120E-G thru SB1100E-G Voltage Range 20 to 100 V Current A "-G" RoHS Device • Low drop down voltage • 1.0A operation at TA=75°C with no thermal runaway • For use in low voltage, high frequency invertors free wheeling and polarity protection • Silicon epitaxial planar chips • Electrostatic discharge ESD test under IEC61000-4-2: standard >15KV air & >8KV contact • Lead-free part, meet RoHS requirements MECHANICAL DATA DO-41 Min. 0 5 6 0 4 • Case Molded plastic body DO-41 • Epoxy UL94-V0 rated flame retardant • Terminals Solderable per MIL-STD-750 Method 2026 • Polarity Color band denotes cathode end • Mounting Position Any • Weight ounces, grams Min. Unit :inch mm MAXIMUM RATING AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified Symbols 120E 140E 145E 150E 160E 180E 1100E Units VRRM 20 40 45 50 60 80 100 Volts Maximum RMS Voltage VRMS 14 28 30 35 42 56 70 Volts Maximum DC Blocking Voltage VDC 20 40 45 50 60 80 100 Volts Maximum Average Forward Rectified Current 9.5mm lead length at TA=75°C, See Figure 1 Peak Forward Surge Current 8.3mS single half sine-wave superimp osed on rated load JEDEC Me thod TL=110°C Maximum Forward Voltage at 1.0A Note 1 IAV IFSM VF TA= 25°C TA=100°C Amps Amps Volts mA Typical Junction Capacitance Note 2 Typical Thermal Resistance Note 3 °C/W Operating Junction Temperature Range -65 ~ +125 -65 ~ +150 Storage Temperature Range TSTG -65 ~ +150

PDF Datasheet Preview

Low VF/ESD Leaded Schottky Barrier Rectifiers

SB120E-G thru SB1100E-G

Voltage Range 20 to 100 V Current A
"-G" RoHS Device
• Low drop down voltage
• 1.0A operation at TA=75°C with no thermal runaway
• For use in low voltage, high frequency invertors free
wheeling and polarity protection
• Silicon epitaxial planar chips
• Electrostatic discharge ESD test under IEC61000-4-2:
standard >15KV air & >8KV contact
• Lead-free part, meet RoHS requirements

MECHANICAL DATA

DO-41

Min.
0 5 6 0 4
• Case Molded plastic body DO-41
• Epoxy UL94-V0 rated flame retardant
• Terminals Solderable per MIL-STD-750 Method 2026
• Polarity Color band denotes cathode end
• Mounting Position Any
• Weight ounces, grams

Min.

Unit :inch mm

MAXIMUM RATING AND ELECTRICAL CHARACTERISTICS

Ratings at 25°C ambient temperature unless otherwise specified

Symbols 120E 140E 145E 150E 160E 180E 1100E Units

VRRM 20 40 45 50 60 80 100 Volts

Maximum RMS Voltage

VRMS 14 28 30 35 42 56 70 Volts

Maximum DC Blocking Voltage

VDC 20 40 45 50 60 80 100 Volts

Maximum Average Forward Rectified Current 9.5mm lead length at TA=75°C, See Figure 1

Peak Forward Surge Current
8.3mS single half sine-wave superimp osed on rated load JEDEC Me thod TL=110°C

Maximum Forward Voltage at 1.0A Note 1

IAV IFSM VF

TA= 25°C

TA=100°C

Amps

Amps

Volts mA

Typical Junction Capacitance Note 2

Typical Thermal Resistance Note 3
°C/W

Operating Junction Temperature Range
-65 ~ +125
-65 ~ +150

Storage Temperature Range

TSTG
-65 ~ +150

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived SB140E-G Datasheet file may be downloaded here without warranties.

Datasheet ID: SB140E-G 506269