GOLD PLATED NICKEL PLATED 131-1693-101 131-1693-116
Part | Datasheet |
---|---|
![]() |
131-1693-101 (pdf) |
PDF Datasheet Preview |
---|
50 Ohm SMB Right Angle Solder Type Plug - Die Cast Captivated Contact INCHES MILLIMETERS CUSTOMER DRAWINGS AVAILABLE UPON REQUEST CABLE TYPE Semi-Rigid GOLD PLATED NICKEL PLATED 131-1693-101 131-1693-116 Identify connector parts. 2 piece parts - except diecast Strip cable to dimensions shown. Do not nick center conductor. Insert cable into body making certain that the cable insulation bottoms on center contact. Solder center conductor to contact through the rear and side access ports. Use a minimum amount of solder for a good joint. diameter solder is recommended. Solder body to cable. Use a minimum amount of heat to minimize cable insulation movement. Place expansion cap in access port and set with diameter punch. Snap cover ring over side access port. CABLE GROUP RG-405/u semi-rigid PART NUMBER 131-1693-101 131-1693-116 Emerson Network Power Connectivity Solutions 299 Johnson Avenue SW, Waseca, MN 56093 • 800 -247- 8256 • +1 507 833-8822 • SMB - 50 Ohm Connectors Specifications INCHES MILLIMETERS CUSTOMER DRAWINGS AVAILABLE UPON REQUEST ELECTRICAL RATINGS Impedance 50 ohms Frequency Range Connectors 0-4 GHz Dummy loads 0-1 GHz VSWR f = GHz Straight Right Angle Cabled Cabled RG-178 cable + .04f + .06f RG-316, RG-58, and semi-rigid cable + .04f + .04f Adapters + .04f Uncabled receptacles, dummy loads N/A Working Voltage Vrms maximum † Connectors for Cable Type Sea Level 70K Feet RG-178 250 RG-316, RG-58, semi-rigid uncabled receptacles, adapters 335 Dummy loads N/A Dielectric Withstanding Voltage VRMS minimum at sea level † Connectors for RG-178 750 Connectors for RG-316, RG-58, semi-rigid, uncabled receptacles, adapters 1000 Dummy loads N/A Corona Level Volts minimum at 70,000 feet † Connectors for RG-178 185 Connectors for RG-316, RG-58, semi-rigid 250 |
More datasheets: AT25040-10PC | AT25040N-10SC | AT25040-10PI | AT25040N-10SC-2.7 | AT25040-10PC-2.7 | AT25020-10PI | AON6524_001 | WM8580GEFT/RV | WM8580GEFT/V | HSMM-A400-V8QM2 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 131-1693-101 Datasheet file may be downloaded here without warranties.