HSMM-A400-V8QM2

HSMM-A400-V8QM2 Datasheet


CAUTION HSMN-, HSMK-, LEDs are Class 2 ESD sensitive. Please observe appropriate precautions during handling and processing. Refer to Avago Application Note AN-1142 for additional details.

Part Datasheet
HSMM-A400-V8QM2 HSMM-A400-V8QM2 HSMM-A400-V8QM2 (pdf)
PDF Datasheet Preview
SMT LED Surface Mount LED Indicator

Data Sheet

Avago Power PLCC-4 is an extension of our SMT LEDs. The package can be driven at higher current due to its superior package design. The product is able to dissipate heat more efficiently compared to the conventional PLCC-2 SMT LEDs. In proportion to the increase in driving current, this family of LEDs is able to produce higher light output compared to the conventional PLCC-2 SMT LEDs.

These SMT LEDs have higher reliability and better performance and are designed to work under a wide range of environmental conditions. This higher reliability makes them suitable for use under harsh environment and conditions like automotive. In addition, they are also suitable to be used in electronic signs and signals.

To facilitate easy pick and place assembly, the LEDs are packed in EIA-compliant tape and reel. Every reel will be shipped in single intensity and color bin except for red color , to provide close uniformity.

These LEDs are compatible with IR solder reflow process. Due to the high reliability feature of these products, they also can be mounted using through-the-wave soldering process.

There are a variety of colors and various viewing angles 30°, 60° and 120° available in these SMT LEDs. Ideally, the 30° parts are suitable for light piping where focused intensities are required. As for the 60° and 120°, they are most suitable for automotive interior and exterior lighting and electronic signs applications.
• Industry standard PLCC-4
• High reliability LED package
• High brightness using AlInGaP and InGaN dice technologies
• High optical efficiency
• Higher ambient temperature at the same current possible compared to PLCC-2
• Available in full selection of colors
• Super wide viewing angle at
• Available in 8mm carrier tape on 7-inch reel
• Compatible with both IR and TTW soldering process
• JEDEC MSL 2a
• High reliability LED package due to enhanced silicone resin material for InGaN family
• Interior automotive

Instrument panel backlighting

Central console backlighting

Cabin backlighting

Navigation and audio system

Dome lighting

Push button backlighting
• Exterior automotive Turn signals CHMSL Rear combination lamp Puddle light
• Electronic signs and signals Interior full color sign Variable message sign
• Office automation, home appliances, industrial equipment Front panel backlighting Push button backlighting Display backlighting

CAUTION HSMN-, HSMK-, LEDs are Class 2 ESD sensitive. Please observe appropriate precautions during handling and processing. Refer to Avago Application Note AN-1142 for additional details.

Package Dimensions

TYP.

CATHODE MARKING

NOTES ALL DIMENSIONS IN mm. ELECTRICAL CONNECTION BETWEEN ALL CATHODES IS RECOMMENDED.

Device Selection Guide

Color

Min. IV mcd

Max. IV mcd

Test Current mA Dice Technology

HSMC-A400-S30M1

AlInGaP

HSMC-A401-U80M1
More datasheets: AT25020N-10SI | AT25040-10PC | AT25040N-10SC | AT25040-10PI | AT25040N-10SC-2.7 | AT25040-10PC-2.7 | AT25020-10PI | AON6524_001 | WM8580GEFT/RV | WM8580GEFT/V


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived HSMM-A400-V8QM2 Datasheet file may be downloaded here without warranties.

Datasheet ID: HSMM-A400-V8QM2 520435