CPL-259-8
CPL-259-8 Datasheet
CPL-259-8
| Part | Datasheet |
|---|---|
CPL-259-8 |
CPL-259-8 (pdf) |
| PDF Datasheet Preview |
|---|
| INCHES MILLIMETERS CUSTOMER DRAWINGS AVAILABLE UPON REQUEST UHF Straight Crimp Type Plug Crimp Contact PART NUMBER CABLE TYPE CPL-259-8 RG-8 “A” “B” WIRE GAUGE WIRE DECIMAL JACKET O.D. Identify connector parts. 3 piece parts Except CPL-259-10 1 Piece Slide crimp sleeve over cable and strip cable to dimensions shown. Do not nick center conductor during strip operations. CPL-259-10 trim braid and insulation to Slide coupling nut onto the connector body. Then slide the connector body over cable so that the center conductor extends through the front of the contact. Crimp the contact as shown. Trim away the center conductor extending past the contact. CPL-259-10 fold braid onto jacket before sliding connector body onto cable. Arrange braid uniformly around crimp stem. Slide crimp sleeve over braid and crimp securely using recommended crimp tool. Part Number CPL-259-8 Cable RG-8 Wire Gauge Wire Decimal Jacket O.D. Crimp Braid Hex Crimp Strain Relief none Contact Crimp Hex Recommended Crimp Tool 24-310 Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-243-8814 • Fax 507-833-6287 • UHF Connectors Specificaitons INCHES MILLIMETERS CUSTOMER DRAWINGS AVAILABLE UPON REQUEST The UHF connectors are low cost, general purpose units designed for low frequency system applications. These commercial quality connectors are equipped with threaded coupling interfaces for secure and reliable connections. The Standard UHF and Mini UHF connectors are not intermateable. STANDARD UHF Electrical Characteristics Impedance Nonconstant Frequency range 0-500 MHz Working voltage 500 volts RMS at sea level Dielectric withstanding voltage 1500 volts RMS at sea level Insulation resistance 5000 megohms minimum Environmental Characteristics Recommended temperature range -55OC to +85OC Mechanical Characteristics Durability 500 cycles Cable retention 20 lbs., RG-58 C/U cable Materials Body and coupling nut Zinc or brass Contact Beryllium copper or brass Crimp Sleeve Brass Insulator Plating Body - Nickel Crimp sleeve - Nickel Contact - Gold or nickel Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-243-8814 • Fax 507-833-6287 • |
| More datasheets: ACPM-9417-BLK | ACPM-9417-TR2 | ACPM-9317-TR1 | ACPM-9317-BLK | PLMQ7192/256-160NC | PLMQ7128/160-160NC | 96RC-SAS-4P-PE-LS3 | HLS-440P B | HLS-440P A | B39871R2711U310 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CPL-259-8 Datasheet file may be downloaded here without warranties.