CP1094AST

CP1094AST Datasheet

Part	Datasheet
CP1094AST	CP1094AST (pdf)

PDF Datasheet Preview
50 Ohm BNC Front Mount Bulkhead Jack Receptacle With Solder Tab INCHES MILLIMETERS CUSTOMER DRAWINGS AVAILABLE UPON REQUEST CP-1094-AST Mounting hole layout Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • • Fax 507-833-6287 • BNC Connectors Specifications INCHES MILLIMETERS CUSTOMER DRAWINGS AVAILABLE UPON REQUEST The BNC series connector is a commercial quality product that intermates with all standard double bayonet stud BNC designs. All contacts are captivated for ruggedness. The 50 ohm and 75 ohm interfaces are intermateable and provide quick, reliable connections for instrumentation, medical and LAN applications. Specifications* 50 Ohm BNC Electrical Characteristics Impedance 50 Ohm nominal Frequency range 0-4 GHz Working voltage 500 volts RMS at sea level Dielectric withstanding voltage 1500 volts RMS at sea level Corona level 375 volts minimum at 70,000 feet Contact resistance Outer - milliohms maximum Center - milliohms maximum Insulation resistance 5000 megohms minimum Environmental Characteristics Recommended temperature range -55OC to +85OC Moisture resistance MIL-STD-202 Mechanical Characteristics Durability 500 cycles Force to engage/disengage 3 lbs. maximum Cable retention 20 lbs., RG-58 C/U cable Materials Body Zinc or brass Contact Brass, beryllium copper or phosphor bronze Spring Washer Beryllium copper Crimp sleeve Brass Insulator or TPX Polymethylpentene Plating Body - Nickel except where noted Crimp sleeve - Nickel Contact - Gold * These values are typical and may not apply to all connectors. Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • • Fax 507-833-6287 •

PDF Datasheet Preview

50 Ohm BNC Front Mount Bulkhead Jack Receptacle With Solder Tab

INCHES MILLIMETERS CUSTOMER DRAWINGS AVAILABLE UPON REQUEST

CP-1094-AST Mounting hole layout

Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832
•
• Fax 507-833-6287
•

BNC Connectors

Specifications

INCHES MILLIMETERS CUSTOMER DRAWINGS AVAILABLE UPON REQUEST

The BNC series connector is a commercial quality product that intermates with all standard double bayonet stud BNC designs. All contacts are captivated for ruggedness. The 50 ohm and 75 ohm interfaces are intermateable and provide quick, reliable connections for instrumentation, medical and LAN applications.

Specifications*
50 Ohm BNC Electrical Characteristics Impedance 50 Ohm nominal Frequency range 0-4 GHz Working voltage 500 volts RMS at sea level Dielectric withstanding voltage 1500 volts RMS at sea level Corona level 375 volts minimum at 70,000 feet Contact resistance Outer - milliohms maximum

Center - milliohms maximum Insulation resistance 5000 megohms minimum Environmental Characteristics Recommended temperature range -55OC to +85OC Moisture resistance MIL-STD-202 Mechanical Characteristics Durability 500 cycles Force to engage/disengage 3 lbs. maximum Cable retention 20 lbs., RG-58 C/U cable Materials Body Zinc or brass Contact Brass, beryllium copper or phosphor bronze Spring Washer Beryllium copper Crimp sleeve Brass Insulator or TPX Polymethylpentene Plating Body - Nickel except where noted

Crimp sleeve - Nickel Contact - Gold
* These values are typical and may not apply to all connectors.

Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832
•
• Fax 507-833-6287
•

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CP1094AST Datasheet file may be downloaded here without warranties.

Datasheet ID: CP1094AST 522679