HMC410MS8GE

HMC410MS8GE Datasheet

HMC410MS8G / 410MS8GE

Part	Datasheet
HMC410MS8GE	HMC410MS8GE (pdf)

Related Parts	Information
HMC410MS8GETR	HMC410MS8GETR

PDF Datasheet Preview
MIXERS - SINGLE & DOUBLE-BALANCED - SMT OBSOLETE PRODUCT HMC410MS8G / 410MS8GE v02.0607 GaAs MMIC DOUBLE-BALANCED HIGH IP3 MIXER, 9 - 15 GHz The HMC410MS8G / HMC410MS8GE is ideal for • Long Haul Radio Platforms • Microwave Radio • VSAT Conversion Loss 8 dB LO/RF Isolation 40 dB LO/IF Isolation 37 dB Input IP3 +24 dBm No External Components MSOP8G SMT Package Functional Diagram The HMC410MS8G & HMC410MS8GE are passive double balanced high IP3 mixers that operate between 9 GHz and 15 GHz. The HMC410MS8G & HMC410MS8GE operate with LO drive levels between +13 dBm and +19 dBm, and provide 8 dB conversion loss across the entire specified frequency band. These mixers require no external components or bias. Electrical Specifications, TA = +25° C Parameter Min. Frequency Range, RF & LO Frequency Range, IF Conversion Loss Noise Figure SSB LO to RF Isolation LO to IF Isolation RF to IF Isolation IP3 Input 1 dB Compression Input * Unless otherwise noted, all measurements performed as downconverter, IF= GHz. IF = GHz LO = +17 dBm Typ. - DC - 8 40 - 45 37 17 24 14 Max. Units GHz dB dBm For price, delivery and to place orders Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone 978-250-3343 Fax 978-250-3373 Order On-line at Application Support Phone 978-250-3343 or MIXERS - SINGLE & DOUBLE-BALANCED - SMT v02.0607 Conversion Gain vs. Temperature LO = +17 dBm CONVERSION GAIN dB +25 C -40 C +85 C -20 8 10 11 12 13 14 15 16 FREQUENCY GHz OBSOLETE PRODUCT [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material Rogers 4350 The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. For price, delivery and to place orders Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone 978-250-3343 Fax 978-250-3373 Order On-line at Application Support Phone 978-250-3343 or

PDF Datasheet Preview

MIXERS - SINGLE & DOUBLE-BALANCED - SMT

OBSOLETE PRODUCT

HMC410MS8G / 410MS8GE
v02.0607

GaAs MMIC DOUBLE-BALANCED

HIGH IP3 MIXER, 9 - 15 GHz

The HMC410MS8G / HMC410MS8GE is ideal for
• Long Haul Radio Platforms
• Microwave Radio
• VSAT

Conversion Loss 8 dB LO/RF Isolation 40 dB LO/IF Isolation 37 dB Input IP3 +24 dBm No External Components MSOP8G SMT Package

Functional Diagram

The HMC410MS8G & HMC410MS8GE are passive double balanced high IP3 mixers that operate between 9 GHz and 15 GHz. The HMC410MS8G & HMC410MS8GE operate with LO drive levels between +13 dBm and +19 dBm, and provide 8 dB conversion loss across the entire specified frequency band. These mixers require no external components or bias.

Electrical Specifications, TA = +25° C

Parameter Min.

Frequency Range, RF & LO

Frequency Range, IF

Conversion Loss

Noise Figure SSB

LO to RF Isolation

LO to IF Isolation

RF to IF Isolation

IP3 Input
1 dB Compression Input
* Unless otherwise noted, all measurements performed as downconverter, IF= GHz.

IF = GHz LO = +17 dBm

Typ. - DC -
8 40 - 45 37 17 24 14

Max.

Units

GHz dB dBm

For price, delivery and to place orders Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824

Phone 978-250-3343 Fax 978-250-3373 Order On-line at

Application Support Phone 978-250-3343 or

MIXERS - SINGLE & DOUBLE-BALANCED - SMT
v02.0607

Conversion Gain vs. Temperature LO = +17 dBm

CONVERSION GAIN dB
+25 C -40 C
+85 C
-20 8
10 11 12 13 14 15 16

FREQUENCY GHz

OBSOLETE PRODUCT
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material Rogers 4350

The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from

Hittite upon request.

For price, delivery and to place orders Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824

Phone 978-250-3343 Fax 978-250-3373 Order On-line at

Application Support Phone 978-250-3343 or

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived HMC410MS8GE Datasheet file may be downloaded here without warranties.

Datasheet ID: HMC410MS8GE 517934