ES3299

ES3299 Datasheet

ES3299

Part	Datasheet
ES3299	ES3299 (pdf)

Related Parts	Information
ES199	ES199

PDF Datasheet Preview
CHEMTRONICS Technical Data Sheet Eco-Rite Stencil Cleaner The eco-friendly stencil cleaner TDS # 3299 PRODUCT DESCRIPTION Eco-Rite Stencil Cleaner is an environmentally friendly water based product designed to effectively clean solder paste from stencils. EcoRite Stencil Cleaner is non-corrosive and biodegradable, and comes available in a convenient ready to use trigger sprayer. The water based cleaning solution cleans stencils of solder paste without the environmental impact of high VOC’s, caustic compounds, and butyl-based cleaners. • Effectively cleans wet and dry solder paste • Removes misprinted paste • Non-flammable • Biodegradable • No Phosphates, EDTA, or NTA • Non-caustic, non-acidic, no chlorine bleach, no abrasives • No carcinogens or ozone depleting compounds • No petroleum distillates • No alkylphenolethoxylates • Butyl-Free TYPICAL APPLICATIONS Eco-Rite Stencil Cleaner can be used to clean stencils by: • Underside Wiping • Ultrasonic Stencil Cleaning • Spray Cleaning Eco-Rite Stencil Cleaner removes the following paste types: • Rosin-based R, RMA, RA • No Clean • Lead-free • Water soluble • Lead free adhesives TYPICAL PRODUCT DATA AND PHYSICAL PROPERTIES Boiling Point RTU Concentrate Solubility in Water Specific Gravity RTU Concentrate Flash Point TCC Appearance Odor CARB & OTC VOC Content* RTU Concentrate 85°C/185oF 96°C/205oF Initial 100% None Clear Liquid Moderate SQAQMD VOC Content RTU Concentrate 83 gms/L 415 gms/L Shelf life 2 years after opening *Volatile Organic Compound VOC information is calculated on a weight basis using the VOC definition of California Air Resources Board CARB Consumer Product Regulations, South Coast Air Quality Management District SCAQMD Rule 102 and the Federal definition published in 40 CFR 51.100 s . COMPATIBILITY Eco-Rite Stencil Cleaner is generally compatible with most materials used in printed circuit board fabrication. With any cleaning agent compatibility must be determined on a non-critical area prior to use. Material Teflon Graphite LDPoly PVC PEHD Lexan ABS Noryl EPDM Butyl Buna N Acrylic Nylon 66 Compatibility Excellent Good Excellent Good Excellent Good Excellent USAGE INSTRUCTIONS For industrial use only. Read MSDS carefully prior to use. Eco-Rite Stencil Cleaner RTU can be sprayed directly from the quart bottle onto uncured solder past. Wipe away soils with a Controlwipes Wipe, or a clean, lint-free wipe. Eco-Rite Stencil Cleaner concentrate can be full strength for immersion cleaning or diluted to desired concentration. Rinse parts thoroughly in de-ionized water and dry where required. Dilution ratios for concentrate Water Conc Heavy flux residue Moderate flux residue / RTU

PDF Datasheet Preview

CHEMTRONICS Technical Data Sheet

Eco-Rite Stencil Cleaner

The eco-friendly stencil cleaner

TDS # 3299

PRODUCT DESCRIPTION Eco-Rite Stencil Cleaner is an environmentally friendly water based product designed to effectively clean solder paste from stencils. EcoRite Stencil Cleaner is non-corrosive and biodegradable, and comes available in a convenient ready to use trigger sprayer. The water based cleaning solution cleans stencils of solder paste without the environmental impact of high VOC’s, caustic compounds, and butyl-based cleaners.
• Effectively cleans wet and dry solder paste
• Removes misprinted paste
• Non-flammable
• Biodegradable
• No Phosphates, EDTA, or NTA
• Non-caustic, non-acidic, no chlorine bleach, no
abrasives
• No carcinogens or ozone depleting compounds
• No petroleum distillates
• No alkylphenolethoxylates
• Butyl-Free

TYPICAL APPLICATIONS Eco-Rite Stencil Cleaner can be used to clean stencils by:
• Underside Wiping
• Ultrasonic Stencil Cleaning
• Spray Cleaning

Eco-Rite Stencil Cleaner removes the following paste types:
• Rosin-based R, RMA, RA
• No Clean
• Lead-free
• Water soluble
• Lead free adhesives

TYPICAL PRODUCT DATA AND PHYSICAL PROPERTIES

Boiling Point RTU Concentrate

Solubility in Water Specific Gravity RTU Concentrate

Flash Point TCC Appearance

Odor

CARB & OTC VOC Content* RTU Concentrate
85°C/185oF 96°C/205oF Initial
100%

None Clear Liquid Moderate

SQAQMD VOC Content RTU Concentrate
83 gms/L 415 gms/L

Shelf life
2 years after opening
*Volatile Organic Compound VOC information is calculated on a weight basis using the VOC definition of California Air Resources Board CARB Consumer Product Regulations, South Coast Air Quality Management District SCAQMD Rule 102 and the Federal definition published in 40 CFR 51.100 s .

COMPATIBILITY Eco-Rite Stencil Cleaner is generally compatible with most materials used in printed circuit board fabrication. With any cleaning agent compatibility must be determined on a non-critical area prior to use.

Material Teflon Graphite LDPoly PVC PEHD Lexan ABS Noryl EPDM Butyl Buna N Acrylic Nylon 66

Compatibility Excellent Good Excellent Good Excellent Good Excellent

USAGE INSTRUCTIONS For industrial use only. Read MSDS carefully prior to use.

Eco-Rite Stencil Cleaner RTU can be sprayed
directly from the quart bottle onto uncured solder
past. Wipe away soils with a Controlwipes Wipe, or
a clean, lint-free wipe. Eco-Rite Stencil Cleaner
concentrate can be full strength for immersion cleaning
or diluted to desired concentration. Rinse parts
thoroughly in de-ionized water and dry where
required.

Dilution ratios for concentrate Water Conc

Heavy flux residue

Moderate flux residue / RTU

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ES3299 Datasheet file may be downloaded here without warranties.

Datasheet ID: ES3299 644101