HPP801A031

HPP801A031 Datasheet

HPP801A031 MULTIPLE PACKAGE QUANTITY OF 48 PIECES HS1101LF - CAPACITIVE RELATIVE HUMIDITY SENSOR

Part	Datasheet
HPP801A031	HPP801A031 (pdf)

PDF Datasheet Preview
HS1101LF Relative Humidity Sensor • Lead free component • High reliability and long term stability • Patented solid polymer structure • Suitable for linear voltage or frequency output circuitry • Fast response time and very low temperature coefficient Based on a unique capacitive cell, these relative humidity sensors are designed for high volume, cost sensitive applications such as office automation, automotive cabin air control, home appliances, and industrial process control systems. They are also useful in all applications where humidity compensation is needed. • Full interchangeability with no calibration • Automotive required in standard conditions • Instantaneous desaturation after long periods in • Home Appliance saturation phase • Compatible with automatized assembly • Printers processes, including Pb free wave soldering and reflow processes 1 • Meteorology • Individual marking for compliance to stringent traceability requirements • Part may be washed with distilled water PERFORMANCE SPECS MAXIMUM RATINGS Ratings Operating Temperature Symbol Ta Value -60 to 140 Storage Temperature Tstg -60 to 140 Supply Voltage Peak Humidity Operating Range 0 to 100 Peak conditions less than 10% of the operating time. Unit °C °C Vac % RH HS1101LF HPC052_I October 2012 HS1101LF Relative Humidity Sensor ELECTRICAL CHARACTERISTICS OF HUMIDITY SENSOR Ta=25°C, measurement frequency / 1V unless otherwise noted Characteristics Humidity Measuring Range Supply Voltage Nominal capacitance 1 Temperature coefficient Average Sensitivity from 33% to 75%RH Leakage Current Vcc=5V Recovery time after 150 hours of condensation Humidity Hysteresis Long term stability Time Constant at 63% of signal, still air 33%RH to 80%RH Deviation to typical response curve 10% RH to 90%RH 1 Tighter specification available on request Symbol RH Vs C Tcc Unit ORDERING INFORMATION HPP801A031 MULTIPLE PACKAGE QUANTITY OF 48 PIECES HS1101LF - CAPACITIVE RELATIVE HUMIDITY SENSOR To distinguish HS1101 from HS1101LF, HS1101LF is designed with a black plastic cap Sample kit of HS1101LF is available through MEASUREMENT SPECIALTIES web site: Customer Service contact details Measurement Specialties, Inc - MEAS France Impasse Jeanne Benozzi CS 83 163 31027 Toulouse Cedex 3 FRANCE Tél +33 0 5 820 822 02 Fax +33 0 5 820 821 51 Sales: Comments Deletion of “HS1100LF” reference into the document Physical drawing change before too fuzzy to read Standardized datasheet format Temperature Coefficient adjustment New MEAS template, MEAS-France contact details updated Who D. LE GALL D. LE GALL D. LE GALL D. LE GALL D. LE GALL-ZIRILLI Date April 07 May 07 April 08 March 11 October 12 HS1101LF HPC052_I October 2012

PDF Datasheet Preview

HS1101LF Relative Humidity Sensor
• Lead free component
• High reliability and long term stability
• Patented solid polymer structure
• Suitable for linear voltage or frequency output circuitry
• Fast response time and very low temperature coefficient

Based on a unique capacitive cell, these relative humidity sensors are designed for high volume, cost sensitive applications such as office automation, automotive cabin air control, home appliances, and industrial process control systems. They are also useful in all applications where humidity compensation is needed.
• Full interchangeability with no calibration
• Automotive
required in standard conditions
• Instantaneous desaturation after long periods in
• Home Appliance
saturation phase
• Compatible with automatized assembly
• Printers
processes, including Pb free wave soldering and reflow processes 1
• Meteorology
• Individual marking for compliance to stringent
traceability requirements
• Part may be washed with distilled water

PERFORMANCE SPECS

MAXIMUM RATINGS

Ratings Operating Temperature

Symbol Ta

Value -60 to 140

Storage Temperature

Tstg
-60 to 140

Supply Voltage Peak

Humidity Operating Range
0 to 100

Peak conditions less than 10% of the operating time.

Unit °C °C Vac % RH

HS1101LF HPC052_I

October 2012

HS1101LF Relative Humidity Sensor

ELECTRICAL CHARACTERISTICS OF HUMIDITY SENSOR

Ta=25°C, measurement frequency / 1V unless otherwise noted

Characteristics Humidity Measuring Range Supply Voltage Nominal capacitance 1 Temperature coefficient Average Sensitivity from 33% to 75%RH Leakage Current Vcc=5V Recovery time after 150 hours of condensation Humidity Hysteresis Long term stability Time Constant at 63% of signal, still air 33%RH to 80%RH Deviation to typical response curve 10% RH to 90%RH
1 Tighter specification available on request

Symbol RH Vs C Tcc

Unit
ORDERING INFORMATION

HPP801A031 MULTIPLE PACKAGE QUANTITY OF 48 PIECES HS1101LF - CAPACITIVE RELATIVE HUMIDITY SENSOR

To distinguish HS1101 from HS1101LF, HS1101LF is designed with a black plastic cap Sample kit of HS1101LF is available through MEASUREMENT SPECIALTIES web site:

Customer Service contact details

Measurement Specialties, Inc - MEAS France Impasse Jeanne Benozzi CS 83 163 31027 Toulouse Cedex 3 FRANCE Tél +33 0 5 820 822 02 Fax +33 0 5 820 821 51

Sales:

Comments Deletion of “HS1100LF” reference into the document Physical drawing change before too fuzzy to read Standardized datasheet format Temperature Coefficient adjustment New MEAS template, MEAS-France contact details updated

Who D. LE GALL D. LE GALL D. LE GALL D. LE GALL

D. LE GALL-ZIRILLI

Date April 07 May 07 April 08 March 11

October 12

HS1101LF HPC052_I

October 2012

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived HPP801A031 Datasheet file may be downloaded here without warranties.

Datasheet ID: HPP801A031 647586