1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 45
Part | Datasheet |
---|---|
![]() |
CCM04-1317LFT R701 (pdf) |
Related Parts | Information |
---|---|
![]() |
CCM04-1316 |
![]() |
CCM04-1317 |
![]() |
CCM04-1889LFT R102 |
![]() |
CCM04-1316LFT R701 |
![]() |
CCM04-1889 |
PDF Datasheet Preview |
---|
1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 45 CCM04 MKII The CCM04 without card guidance is used where space is at a premium and the card guidance can be built around the connector rather than provided by the connector itself . The CCM04 low without card guidance is dedicated to applications where the overall height of the connector is paramount. A range of low CCM04 connectors are available with mm thick moldings. The wide choice of contact and molding heights suit a broad range of applications. • Available in a variety of molding heights from mm to 5 mm. • The integrated card detection switch optional is sealed against dust and grit. • By using an inlay in the contact area, the life of the precious metal is extended by more than 10 times that of standard gold plating. • The height of the contact above the insulator is mm, so allowing a wider tolerance for the card entry slot. • The contact area is spooned to reduce the risk of accidental or deliberate damage, and to optimize the electrical connection with the card. • The tip of the contact is protected by the molding so that it cannot catch on the card as the card is being inserted. • The contact design ensures a consistent and reliable contact force over the life of the connector. • Robustly formed printed circuit tails are well protected by the insulator body a coplanarity of ± mm is guaranteed. • The moldings are made from high temperature thermoplastic suited for infrared and convection soldering processes. • With tape and reel packaging as standard, the connectors are designed to be automatically picked & placed. Construction Contacts Plating Moldings Copper alloy Contact area Gold alloy inlay Terminals Tin lead 2µ min High temp. thermoplastic UL 94V-0 rated Mechanical data Number of Contacts Mechanical life Durability of inlay Contact force Card detection switch actuation force Vibration 50m/s2 Shock 6, 8 or 16 50,000 cycles min 5,000 cycles min see note 1 N min / N max N max for actuation end travel switch actuates when card is mm from card stop N max for complete depression Frequency 10 to 500 Hz. Acceleration Duration 6 hours - amplitude mm Max electrical discontinuity 1µs Peak value 500 m/s2 Duration 11 ms 3 shocks in each direction of each axis Max electrical discontinuity 1 µs Electrical data Insulation resistance Contact resistance max Switching current Dielectric strength Card detection switch contact resistance Dielectric switch contacts Maximum switch power 1,000 min 100 max 10 µA min / 1 A max 750 Vrms min Normally open closes on card insertion max 250 Vrms min VA Environmental data Operating temperature Soldering temperature Damp heat Salt mist Card detection switch -40°C to +85°C Temperature/time acc. to CECC00802 para. Fig. 3 with peak temperature 250°C IEC 512 test number 11c 10 days IEC 512 test number 11f 96 hours Sealed IP 54 For CCM04 1889 & 1905 Sealed against dust for other versions Note 1 Inlay precious metal rating is based on a very abrasive card being used and is intended to represent worst case. Dimensions are shown in mm Dimensions subject to change 1136 ITT - CCM Catalog 11/20/00 12:29 PM Page 46 CCM04 MKII Ordering code Molding Height mm SMT Tails Standard Straight Standard Straight Standard Without Switch 2 x 3 contacts 2 x 4 contacts CCM04-1801 CCM04-1814 CCM04-1800* CCM04-1813* CCM04-5004** CCM04-1415* CCM04-1200 CCM04-1217* CCM04-1201 CCM04-1218 CCM04-1202 CCM04-1219* CCM04-1203* CCM04-1220 CCM04-1221 *Note On request **Note Replaced by CCM04-5102 see page 53 With Switch 2 x 4 contacts 2 x 8 contacts CCM04-1889 CCM04-1905 CCM04-1888* CCM04-1316 CCM04-1317 CCM04-1318 CCM04-1319* CCM04-1320 CCM04-1333* CCM04-1334 Packaging Connectors without a switch are packaged in accordance with EIA 481-2 or IEC Connectors with a switch are packaged in accordance with EIA 481-3 or IEC 286-3 Standard packaging is in tape and reel. A code is added to the part number that indicates reel packaging and the number of components per reel which varies according to the molding height . Example A CCM04 with 8 contacts plus switch and a molding height of mm has a part number CCM04-1318-R751. Molding Height SMT Tails Standard Straight Standard Straight Standard Without Switch 2x3 contacts 2x4 contacts R182 1800pcs |
More datasheets: AFCT-57R5ATPZ | FIT0261 | BXA30-24T05-15-1 | BXA30-24T05-15-F | BXA30-48T05-12-1 | BXA30-24T05-15 | 212P0112N332RA | CCM04-1316 | CCM04-1317 | CCM04-1889LFT R102 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CCM04-1317LFT R701 Datasheet file may be downloaded here without warranties.