CCM01-1NFROHS

CCM01-1NFROHS Datasheet

CCM01 MK I

Part	Datasheet
CCM01-1NFROHS	CCM01-1NFROHS (pdf)

Related Parts	Information
CCM01-1NF	CCM01-1NF

PDF Datasheet Preview
CCM01 MK I CCM01 MK I connectors have contacts and a blade card detection switch unsealed. These connectors are intended for applications where the card usage is relatively low and the environment is benign. • Available with 8 through hole contacts. • A normally closed blade switch detects when the card is fully inserted. • Snap in boardlocks hold the connector in place prior to soldering. Construction Contacts Plating Moldings Card detection switch Mechanical Data Number of Contacts Mechanical life Card insertion force Card extraction force Contact force Vibration Shock Contact Electrical Data Insulation resistance Current rating Dielectric strength Switch Electrical Data Card detection switch Contact resistance Dielectric strength Current rating Maximum power Environmental Data Operating temperature Soldering temperature Damp heat Salt mist Card detection switch Ordering Code Part Number CCM01-1NF Packaging 20 per tray, 10 trays per box. Copper alloy Contact area Gold over nickel Terminals Tin lead 2µ min Thermoplastic UL 94V-0 rated Copper alloy 8 10,000 cycles min 10 N max 1 N min / 10N max N min / N max Frequency 10 to 500 Hz. Acceleration 50m/s2 Duration 6 hours - amplitude mm Max electrical discontinuity 1µs Peak value 500 m/s2 Duration 11 ms 3 shocks in each direction of each axis Max electrical discontinuity 1 µs 1,000 min 100 max 10 µA min / 1 A max 750 Vrms min Normally closed 100 max 250 Vrms min 1 mA min /10 mA max VA -40°C to +85°C Wave 260°C / 5 sec IEC 512 test number 11c 10 days IEC 512 test number 11f 96 hours Not sealed blade switch Number of Contacts 8 Packaging Multiple 200 Dimensions are shown in mm Dimensions subject to change CCM01 MK I Dimensional Drawings CCM01-1NF A-A 6,5 Card stop 15,4 0,9±0,25 B 19,05 50,3 REF. 19,05 10 40 REF. A 62±0,2 Pick and place area Card insertion direction 3,65±0,3 Card entry 54,3 Embossed Channel 4,8±0,2 4 Snap Feet 12,7 22,08 10x 0,3 3,81 3x 2,54 62 REF. PCB Layout Component side CCM01-1NF 0 9,38 22,08 24,62 27,16 29,7 33,51 Plastic outline 10

PDF Datasheet Preview

CCM01 MK I

CCM01 MK I connectors have contacts and a blade card detection switch unsealed.

These connectors are intended for applications where the card usage is relatively low and the environment is benign.
• Available with 8 through hole contacts.
• A normally closed blade switch detects when the card is fully inserted.
• Snap in boardlocks hold the connector in place prior to soldering.

Construction

Contacts Plating

Moldings Card detection switch

Mechanical Data

Number of Contacts Mechanical life Card insertion force Card extraction force Contact force Vibration

Shock

Contact Electrical Data

Insulation resistance Current rating Dielectric strength

Switch Electrical Data Card detection switch Contact resistance Dielectric strength Current rating Maximum power

Environmental Data

Operating temperature Soldering temperature Damp heat Salt mist Card detection switch
Ordering Code

Part Number CCM01-1NF

Packaging 20 per tray, 10 trays per box.

Copper alloy Contact area Gold over nickel Terminals Tin lead 2µ min Thermoplastic UL 94V-0 rated Copper alloy
8 10,000 cycles min 10 N max 1 N min / 10N max N min / N max Frequency 10 to 500 Hz. Acceleration 50m/s2 Duration 6 hours - amplitude mm Max electrical discontinuity 1µs Peak value 500 m/s2 Duration 11 ms 3 shocks in each direction of each axis Max electrical discontinuity 1 µs
1,000 min 100 max 10 µA min / 1 A max 750 Vrms min

Normally closed 100 max 250 Vrms min 1 mA min /10 mA max VA
-40°C to +85°C Wave 260°C / 5 sec IEC 512 test number 11c 10 days IEC 512 test number 11f 96 hours Not sealed blade switch

Number of Contacts 8

Packaging Multiple 200

Dimensions are shown in mm Dimensions subject to change

CCM01 MK I

Dimensional Drawings

CCM01-1NF

A-A 6,5

Card stop
15,4
0,9±0,25

B 19,05
50,3 REF.
19,05 10
40 REF.

A 62±0,2

Pick and place area

Card insertion direction
3,65±0,3 Card entry
54,3

Embossed

Channel
4,8±0,2
4 Snap Feet
12,7
22,08
10x 0,3
3,81 3x 2,54
62 REF.

PCB Layout

Component side

CCM01-1NF
0 9,38 22,08 24,62 27,16 29,7 33,51

Plastic outline 10

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CCM01-1NFROHS Datasheet file may be downloaded here without warranties.

Datasheet ID: CCM01-1NFROHS 522452