BD06AV2

BD06AV2 Datasheet


BD08 SPST

Part Datasheet
BD06AV2 BD06AV2 BD06AV2 (pdf)
Related Parts Information
BD04AV2 BD04AV2 BD04AV2
BD08AV2 BD08AV2 BD08AV2
BD05AV2 BD05AV2 BD05AV2
BD02AV2 BD02AV2 BD02AV2
PDF Datasheet Preview
BD Series Standard Profile DIP Switches

Features / Benefits

S Traditional full profile S Extended actuator for easy actuation S Open bottom construction allows for solder
washing without the need for tape seal

S Address switch for industrial controls S Logic switching for computers and peripherals S Function controlling for numerous applications

How To Order

Complete part numbers for BD Series standard profile DIP Switches are shown on pages D-12 thru D-14. All switches supplied in ‘OFF’ position and in rigid dispensing tubes. Closed base models suitable for no-wash or bottom wash cleaning methods only.

Specifications

SWITCH FUNCTION SPST - 1 thru 12 position available except 11 position .

CONTACT RATING Carry 100 mA max. 50 V DC. Switch 100 mA max. 5 V DC or 25 mA max. 25 V DC.

MECHANICAL & ELECTRICAL LIFE 10,000 make-and-break cycles at full load, each circuit.

CONTACT RESISTANCE Below 50 milliohms typ. initial 4 V DC, 100 mA.

INSULATION RESISTANCE 109 ohms min.

D DIELECTRIC STRENGTH 500 V RMS min. sea level between adjacent terminals. CAPACITANCE 5 pF max. between adjacent terminals. STORAGE & OPERATING TEMPERATURE - 40_C to 85_C. SHOCK Withstands 20g 11 ms sawtooth waveform with no contact opening greater than 10 microseconds. VIBRATION No contact opening greater than 10 microseconds and no contact closure when exposed to vibration in DA or 5g, whichever is less, from 10 to 55 Hz, and 10g from 55 to 500 Hz.

Open Base Suitable for most cleaning methods

BD08 SPST

SOLDERABILITY Per MIL-STD-202F method 208D, or EIA RS-186E method 9 1 hour steam aging .

PACKAGING Switches supplied in rigid dispensing tubes in full-tube quantities only this may affect order quantity. Number of switches per tube varies with model, consult Customer Service Center. Switch position 1 denotes pin number All switch actuators in ‘OFF’ position, standard.

Materials

CASE & COVER Glass filled polyester PBT , flame retardant UL 94V-0 .

ACTUATOR Glass filled nylon 6/6, flame retardant, heat stabilized UL 94V-0 .

CONTACTS WE#1 over palladium silver over nickel over phosphor bronze.

TERMINALS Phosphor bronze, with tin-lead alloy over nickel plate. TERMINAL SEAL Epoxy.

NOTE Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center.

PC MOUNTING

PART NUMBER NO. POS.

DIM. ‘A’

BD01 BD02 BD03 BD04 BD05 BD06 BD07 BD08 BD09 BD10 BD12
4,57
7,11
9,65
12,19
14,73
17,27
19,81
22,35
24,89
27,43
32,51

Schematic

QUANTITY PER TUBE
More datasheets: PTVS6-076C-SH | PTVS6-058C-SH | 9296001603806 | 9296001603506 | 9296001603906 | ATR0625P-PYQW | BD04AV2 | BD08AV2 | BD05AV2 | BD02AV2


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived BD06AV2 Datasheet file may be downloaded here without warranties.

Datasheet ID: BD06AV2 522443