ASMT-MAK0-AGHN0

ASMT-MAK0-AGHN0 Datasheet

ASMT-JW31-NTV01

Part	Datasheet
ASMT-MAK0-AGHN0	ASMT-MAK0-AGHN0 (pdf)

Related Parts	Information
ASMT-MAK0-AGH00	ASMT-MAK0-AGH00
ASMT-MAK0-AGHQ0	ASMT-MAK0-AGHQ0
ASMT-MRK0-AHJ00	ASMT-MRK0-AHJ00
ASMT-MBK0-NDF00	ASMT-MBK0-NDF00
ASMT-MRK0-AGH00	ASMT-MRK0-AGH00
ASMT-MGK0-NJK00	ASMT-MGK0-NJK00

PDF Datasheet Preview
Solid State Lighting Mid-Power and High-Power LEDs Ambient Light Sensors Your Imagination, Our Innovation Sense • Illuminate • Connect Avago 3W Mini HighPower LEDs in LED Light Strip by Schneider Technologies Solid-State Lighting High-Power LEDs 1 Watt and 3 Watt Mini High-Power LEDs The Mini High-Power LED family features a small scale package and comes with an isolated heat sink for InGaN colors , which enables designs with multiple LEDs on a common heat sink without additional electrical isolation. A built-in Zener Diode enables a high ESD threshold of 16KV, thus it can be assembled in a non ESD safe environment. • Portable lighting appliances such as torchlight, bicycle headlight and miner light • Street lighting, tunnel lighting • Safety, exit and emergency sign lighting • Specialty lighting such as task lighting, small reading lights, spot lights, track lights • Architectural facade lighting and lighting for retail outlets, casinos, restaurants • Accent or marker lighting, strip or step lighting • Retail lighting, decorative lighting & garden lighting • Excellent lumen per dollar ratio, especially for the 3 Watt Series • Small footprint 4mm x 5mm and very low profile 1.85mm height • Direct heat transfer from the metal slug to the mother board • Metal slug is electrically isolated for InGaN colors • Wide viewing angle 140° / 165° • Low thermal resistance 9°C/W • Can be driven at stringent operating condition: LED Junction Temperature 150°C max * • Operating temperature -40°C to +135°C max * • Long operating life due to silicone encapsulation • Reliable Non-Moisture sensitive - MSL 1 unlimited floorlife, no baking required • Energy efficient Power Dissipation starts at 1085mW • Helps lower design cost due to: - Compatible with reflow soldering process - Non-ESD sensitive threshold > 16kV * Refer to Data Sheet for details Secondary Optics Part Number 10048 Plain tight Ø 26.5mm FWHM x Holder 10461 Manufacturer 10124 Narrow frosted Ø 26.5mm 10461 10108 Medium frosted Ø 26.5mm 10461 10049 Eliptical Ø 26.5mm x 10461 This is a selection of the most popular lenses for Avago High-Power LEDs. The above listed manufacturers have a much broader offering of secondary optics specifically designed for Avago High-Power LEDs. For details, please check the internet or contact one of our Distributor Partners. 1 Watt and 3 Watt Mini-High-Power LEDs Product Number Color Color Temperature / Wavelength Flux Bin Luminous Flux / Radiometric Power 350mA Luminous Flux 350mA typ. 3 Watt Mini-High-Power LEDs

PDF Datasheet Preview

Solid State Lighting

Mid-Power and High-Power LEDs Ambient Light Sensors

Your Imagination, Our Innovation Sense
• Illuminate
• Connect

Avago 3W Mini HighPower LEDs in LED Light Strip by Schneider Technologies

Solid-State Lighting High-Power LEDs
1 Watt and 3 Watt Mini High-Power LEDs

The Mini High-Power LED family features a small scale package and comes with an isolated heat sink for InGaN colors , which enables designs with multiple LEDs on a common heat sink without additional electrical isolation. A built-in Zener Diode enables a high ESD threshold of 16KV, thus it can be assembled in a non ESD safe environment.
• Portable lighting appliances such as torchlight, bicycle headlight and miner light
• Street lighting, tunnel lighting
• Safety, exit and emergency sign lighting
• Specialty lighting such as task lighting, small reading
lights, spot lights, track lights
• Architectural facade lighting and lighting for retail
outlets, casinos, restaurants
• Accent or marker lighting, strip or step lighting
• Retail lighting, decorative lighting & garden lighting
• Excellent lumen per dollar ratio, especially for the 3 Watt Series
• Small footprint 4mm x 5mm and very low profile 1.85mm height
• Direct heat transfer from the metal slug to the mother board
• Metal slug is electrically isolated for InGaN colors
• Wide viewing angle 140° / 165°
• Low thermal resistance 9°C/W
• Can be driven at stringent operating condition:

LED Junction Temperature 150°C max *
• Operating temperature -40°C to +135°C max *
• Long operating life due to silicone encapsulation
• Reliable Non-Moisture sensitive - MSL 1
unlimited floorlife, no baking required
• Energy efficient Power Dissipation starts at 1085mW
• Helps lower design cost due to:
- Compatible with reflow soldering process - Non-ESD sensitive threshold > 16kV
* Refer to Data Sheet for details

Secondary Optics

Part Number 10048

Plain tight Ø 26.5mm

FWHM x

Holder 10461

Manufacturer
10124

Narrow frosted Ø 26.5mm
10461
10108

Medium frosted Ø 26.5mm
10461
10049

Eliptical Ø 26.5mm
x 10461

This is a selection of the most popular lenses for Avago High-Power LEDs. The above listed manufacturers have a much broader offering of secondary optics specifically designed for Avago High-Power LEDs. For details, please check the internet or contact one of our Distributor Partners.
1 Watt and 3 Watt Mini-High-Power LEDs

Product Number Color

Color Temperature / Wavelength

Flux Bin Luminous Flux / Radiometric Power 350mA

Luminous Flux 350mA typ.
3 Watt Mini-High-Power LEDs

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ASMT-MAK0-AGHN0 Datasheet file may be downloaded here without warranties.

Datasheet ID: ASMT-MAK0-AGHN0 520522