MSA-0636-BLKG

MSA-0636-BLKG Datasheet


MSA-0636

Part Datasheet
MSA-0636-BLKG MSA-0636-BLKG MSA-0636-BLKG (pdf)
Related Parts Information
MSA-0636-TR1G MSA-0636-TR1G MSA-0636-TR1G
PDF Datasheet Preview
MSA-0636

Cascadable Silicon Bipolar MMIC Amplifiers

Data Sheet

The MSA-0636 is a high performance silicon bipolar Monolithic Microwave Integrated Circuit MMIC housed in a cost effective, microstrip package. This MMIC is designed for use as a general purpose gain block. Typical applications include narrow and broad band IF and RF amplifiers in commercial and industrial applications.

The MSA-series is fabricated using Avago’s 10 GHz fT, 25 GHz fMAX, silicon bipolar MMIC process which uses nitride self-alignment, ion implantation, and gold metallization to achieve excellent performance, uniformity and reliability. The use of an external bias resistor for temperature and current stability also allows bias flexibility.
• Cascadable Gain Block
• Low Operating Voltage V Typical Vd
• 3 dB Bandwidth DC to GHz
• High Gain dB Typical at GHz
• Low Noise Figure dB Typical at GHz
• Cost Effective Ceramic Microstrip Package
36 micro-X Package

Typical Biasing Configuration

R bias

VCC > 5 V

C block IN
3 1 MSA

RFC Optional

C block Vd = V

MSA-0636 Absolute Maximum Ratings

Parameter

Absolute Maximum[1]

Device Current Power Dissipation[2,3]
50 mA 200 mW

RF Input Power
+13 dBm

Junction Temperature Storage Temperature[4]
150°C to 150°C

Notes Permanent damage may occur if any of these limits are exceeded.

TCASE = 25°C. Derate at mW/°C for TC > 169°C. Storage above +150°C may tarnish the leads of this package making it
difficult to solder into a circuit.

The small spot size of this technique results in a higher, though more accurate determination of than do alternate methods.

Thermal Resistance[2,5] = 155°C/W

Electrical Specifications[1], TA = 25°C

Parameters and Test Conditions Id = 16 mA, ZO = 50

Power Gain |S21| 2
f = GHz

Gain Flatness
f = to GHz
f3 dB
3 dB Bandwidth
Ordering Information

Part Numbers No. of Devices

MSA-0636-BLKG

MSA-0636-TR1G
1000

Comments Bulk 7" Reel

MSA-0636 Typical Scattering Parameters ZO = 50 TA = 25°C, Id = 16 mA

Freq.
dB Mag Ang
dB Mag Ang

Mag Ang
171 5
161 8
152 14
144 19
136 21
128 24
115 29
103 31
79 30
60 26
48 27
34 24
21 19

Typical Performance, TA = 25°C
unless otherwise noted

Gain Flat to DC 18
15 12

G p dB

FREQUENCY GHz

Figure Typical Power Gain vs. Frequency, Id = 16 mA.
1 0 +25

P1 dB
0 +85 +125

TEMPERATURE °C

Figure Output Power at 1 dB Gain Compression, NF and Power Gain vs. Case Temperature, f = GHz, Id = 16 mA.

NF dB P1 dB dBm

Id mA
25 TC = +125°C TC = +25°C
20 TC =

Figure Device Current vs. Voltage.
More datasheets: MF-MSMD110-2 | MF-MSMD110/16-2 | MF-MSMD150-2 | MF-MSMD125-2 | MF-MSMD014-2 | MF-MSMD075-2 | MF-MSMD050-2 | MF-MSMD020-2 | M-300R | MSA-0636-TR1G


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MSA-0636-BLKG Datasheet file may be downloaded here without warranties.

Datasheet ID: MSA-0636-BLKG 520471