HFBR-2506AMZ

HFBR-2506AMZ Datasheet

HFBR-1506AMZ/HFBR-2506AMZ Fiber Optic SMA Transmitters and Receivers for 16 MBd SERCOS Applications

Part	Datasheet
HFBR-2506AMZ	HFBR-2506AMZ (pdf)

PDF Datasheet Preview
HFBR-1506AMZ/HFBR-2506AMZ Fiber Optic SMA Transmitters and Receivers for 16 MBd SERCOS Applications Data Sheet SERCOS, an acronym for SErial Realtime COmmunications Systems, is a standard digital interface for communication in industrial CNC applications. SERCOS is a European EN 61491 and international standard IEC The optical interface allows data rates of 2,4,8 and 16 MBd and data transfer between numerical controls and drives via fiber-optic rings, with voltage isolation and noise immunity. The HFBR-1506AMZ and HFBR-2506AMZ products have a guaranteed performance up to 16 MBd. • RoHS-Compliant • Meets Industrial SERCOS 16MBd standard • SMA ports • 650 nm wavelength • Metal coated, plastic packaging • Specified for use with 1 mm POF and 200 um HCS • DC - 16 MBd data rate • Industrial Control Data Links • Factory Automation Data Links • Voltage Isolation Applications Package Information The RoHS-compliant transmitters and receivers are housed in a low-cost, dual-in-line package that is made of high strength, heat resistant, chemically resistant and UL 94V-O UL file # E121562 flame retardant plastic. Both the transmitter and receiver are coated with a layer of conductive alloy for better air discharge ESD performance. The package is designed for auto insertion and wave soldering so it is ideal for high volume production applications. Handling and Design Information When soldering, it is advisable to leave the protective cap on the unit to keep the optics clean. Good system performance requires clean port optics and cable ferrules to avoid obstructing the optical path. Clean compressed air often is sufficient to remove particles of dirt methanol on a cotton swab also works well. Recommended Chemicals for Cleaning/Degreasing Alcohols methyl, isopropyl, isobutyl. Aliphatics hexane, heptane. Other soap solution, naphtha. Do not use partially halogenated hydrocarbons such as 1,1,1 trichloroethane, ketones such as MEK, acetone, chloroform, ethyl acetate, methylene dichloride, phenol, methylene chloride or N-methylpyrolldone. Also, Avago Technologies does not recommend the use of cleaners that use halogenated hydrocarbons because of their potential environmental harm. CAUTION The small junction size inherent in the design of these components increases the components’ susceptibility to damage from electrostatic discharge ESD . It is advised that normal static precautions be taken in handling and assembly of these components to prevent damage and/or degradation which may be induced by ESD. Link Performance Specification 0 °C to +70 °C unless otherwise noted. Parameter Symbol Min Unit Condition Reference Link distance with HFBR-1506AMZ/2506AMZ I Note 1, 2, 4, 6 Note 1, 3, 5, 6 Notes 60 mA nominal drive current. POF HFBR-ExxyyyZ dB/m worst case attenuation. HCS 10 dB/km worst case attenuation. Including a 3 dB optical safety margin accounting for link service lifetime. Including a 2 dB optical safety margin accounting for link service lifetime. Signaling rate dc to 16 MBd. HFBR-1506AMZ Transmitter The HFBR-1506AMZ transmitter incoporates a 650nm LED in a metal-coated, plastic housing. The high light output power enables the use of both plastic optical fiber POF and Hard Clad Silica HCS . This transmitter can operate up to 16MBd using a simple driver circuit. The HFBR-1506AMZ is compatible with SMA connectors. 45 6 7 BOTTOM VIEW, HFBR-1506AMZ SEE NOTE 6 Figure FUNCTION 1 CONNECTED TO PIN 4 CONNECTED TO PIN 1 5 GND 6 GND 7 CATHODE 8 ANODE Absolute Maximum Ratings Parameter Unit Notes Storage and Operating Temperature TS, O Peak Forward Input Current IF, PK Average Forward Input Current IF, AVG Lead Soldering Cycle

PDF Datasheet Preview

HFBR-1506AMZ/HFBR-2506AMZ Fiber Optic SMA Transmitters and Receivers for 16 MBd SERCOS Applications

Data Sheet

SERCOS, an acronym for SErial Realtime COmmunications Systems, is a standard digital interface for communication in industrial CNC applications. SERCOS is a European EN 61491 and international standard IEC The optical interface allows data rates of 2,4,8 and 16 MBd and data transfer between numerical controls and drives via fiber-optic rings, with voltage isolation and noise immunity. The HFBR-1506AMZ and HFBR-2506AMZ products have a guaranteed performance up to 16 MBd.
• RoHS-Compliant
• Meets Industrial SERCOS 16MBd standard
• SMA ports
• 650 nm wavelength
• Metal coated, plastic packaging
• Specified for use with 1 mm POF and 200 um HCS
• DC - 16 MBd data rate
• Industrial Control Data Links
• Factory Automation Data Links
• Voltage Isolation Applications

Package Information

The RoHS-compliant transmitters and receivers are housed in a low-cost, dual-in-line package that is made of high strength, heat resistant, chemically resistant and UL 94V-O UL file # E121562 flame retardant plastic. Both the transmitter and receiver are coated with a layer of conductive alloy for better air discharge ESD performance. The package is designed for auto insertion and wave soldering so it is ideal for high volume production applications.

Handling and Design Information

When soldering, it is advisable to leave the protective cap on the unit to keep the optics clean. Good system performance requires clean port optics and cable ferrules to avoid obstructing the optical path. Clean compressed air often is sufficient to remove particles of dirt methanol on a cotton swab also works well.

Recommended Chemicals for Cleaning/Degreasing

Alcohols methyl, isopropyl, isobutyl.

Aliphatics hexane, heptane.

Other soap solution, naphtha.

Do not use partially halogenated hydrocarbons such as 1,1,1 trichloroethane, ketones such as MEK, acetone, chloroform, ethyl acetate, methylene dichloride, phenol, methylene chloride or N-methylpyrolldone. Also, Avago Technologies does not recommend the use of cleaners that use halogenated hydrocarbons because of their potential environmental harm.

CAUTION The small junction size inherent in the design of these components increases the components’ susceptibility to damage from electrostatic discharge ESD . It is advised that normal static precautions be taken in handling and assembly of these components to prevent damage and/or degradation which may be induced by ESD.

Link Performance Specification
0 °C to +70 °C unless otherwise noted.

Parameter

Symbol Min

Unit

Condition Reference

Link distance with HFBR-1506AMZ/2506AMZ I

Note 1, 2, 4, 6 Note 1, 3, 5, 6

Notes 60 mA nominal drive current. POF HFBR-ExxyyyZ dB/m worst case attenuation. HCS 10 dB/km worst case attenuation. Including a 3 dB optical safety margin accounting for link service lifetime. Including a 2 dB optical safety margin accounting for link service lifetime. Signaling rate dc to 16 MBd.

HFBR-1506AMZ Transmitter

The HFBR-1506AMZ transmitter incoporates a 650nm LED in a metal-coated, plastic housing. The high light output power enables the use of both plastic optical fiber POF and Hard Clad Silica HCS . This transmitter can operate up to 16MBd using a simple driver circuit. The HFBR-1506AMZ is compatible with SMA connectors.
45 6 7

BOTTOM VIEW, HFBR-1506AMZ SEE NOTE 6

Figure

FUNCTION
1 CONNECTED TO PIN 4 CONNECTED TO PIN 1 5 GND 6 GND 7 CATHODE 8 ANODE

Absolute Maximum Ratings

Parameter

Unit

Notes

Storage and Operating Temperature TS, O

Peak Forward Input Current

IF, PK

Average Forward Input Current

IF, AVG

Lead Soldering Cycle

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived HFBR-2506AMZ Datasheet file may be downloaded here without warranties.

Datasheet ID: HFBR-2506AMZ 520295