HCPL-800J-500

HCPL-800J-500 Datasheet

HCPL - 800J PLC Powerline DAA IC

Part	Datasheet
HCPL-800J-500	HCPL-800J-500 (pdf)

Related Parts	Information
HCPL-800J-500E	HCPL-800J-500E

PDF Datasheet Preview
HCPL - 800J PLC Powerline DAA IC Data Sheet Lead Pb Free RoHS 6 fully compliant RoHS 6 fully compliant options available -xxxE denotes a lead-free product The HCPL-800J is a galvanically isolated Powerline Data Access Arrangement IC. It provides the key features of isolation, Tx line driver and Rx amplifier as required in a powerline modem application. Used together with a simple LC coupling circuit, the HCPL-800J offers a highly integrated, cost effective Analogue Front End AFE solution. Optical coupling technology provides very high isolation mode rejection, facilitating excellent EMI and EMC performance. Application robustness is enhanced by the inherent properties of opto-isolation devices, to effectively block the transfer of damaging surge transients. Excellent transmitter performance is achieved with the use of a high efficiency, low distortion line driver stage. Transmitter robustness is further enhanced with integrated load detection and over-temperature protection functions. The HCPL-800J is designed to work with various transceiver ICs and significantly simplify the implementation of a powerline modem. Connection Diagram • -60 dB Overall Tx Distortion • 25 nV/ Typical Input Referred Noise • Load Detection Function • Under-Voltage Detection • Over-Temperature Shutdown • Highly Efficient Tx Line Driver • Built-in Rx Amplifier • Temperature Range -40°C to +85°C • Regulatory Approvals pending UL, CSA, IEC/EN/DIN EN 60747-5-2 • Suitable for FCC Part 15 and EN50065-1 Compliant Design • Automatic Meter Reading AMR • Powerline Modem • Home Automation/Control • Security and Surveillance • General Purpose Isolated Transceiver • Internet Appliances TX-EN TX Powerline Transceiver IC ENDEC RX STATUS VCC1 1 Tx-en 2 Tx-in 3 Rx-PD-out 4 Rx-Amp-in 5 Status 6 Rx-out 7 VCC1 8 GND1 HCPL-800J GND2 16 Tx-out 15 VCC2 14 Tx-PD-out 13 Tx-LD-in 12 Cext 11 Rx-in 10 Rref 9 GND2 VCC2 Filter GND2 Filter GND1 GND2 N GND2 CAUTION It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD. Block Diagram Tx -en 1 2 Tx -in V CC1 GND1 8 Status 5 Rx -out 6 Tx -PD -out Tx -LD -in Control IC Status Detection G R2 Tx LED Driver Shield G T2 Tx Ordering Information HCPL-800J are UL Recognized with 3750 Vrms for 1 minute per UL1577. Option RoHS Compliant Packaging Surface Mount Tape & Reel IEC/EN/DIN EN 60747-5-2 Quantity HCPL-800J -000E SO-16 45 per tube -500E SO-16 850 per reel To order, choose a part number from the part number column and combine with the desired option from the option column to form an order entry. Example 1: ACPL-800J-500E to order product of SO-16 package in Tape and Reel packaging with IEC/EN/DIN EN 60747-5-2 Safety Approval in RoHS compliant.. Option datasheets are available. Contact your Avago sales representative or authorized distributor for information. Remarks The notation ‘#XXX’ is used for existing products, while new products launched since 15th July 2001 and RoHS compliant option will use ‘-XXXE‘. Package Outline Drawings 16-Lead Surface Mount Land Pattern Recommendation 16 15 14 13 12 11 10 9 A 800J YYWW ± ± TYPE NUMBER DATE CODE 12345678 ± ± 9° ± ± ALL LEADS TO BE COPLANAR ± ± ± MIN. ± ± ± STANDOFF DIMENSIONS IN INCHES MILLIMETERS . NOTES INITIAL AND CONTINUED VARIATION IN THE COLOR OF THE HCPL-800J’s WHITE MOLD COMPOUND IS NORMAL AND DOES NOT AFFECT DEVICE PERFORMANCE OR RELIABILITY. FLOATING LEAD PROTRUSION IS MAX. Package Characteristics All specifications and figures are at the nominal typical operating conditions of VCC1 = 5 V, GND1 = 0 V, VCC2 = 5 V, GND2 = 0 V and TA = +25°C. Parameter Control IC - Line IC Momentary Withstand Voltage Resistance Control IC - Line IC Capacitance Control IC - Line IC

PDF Datasheet Preview

HCPL - 800J PLC Powerline DAA IC

Data Sheet

Lead Pb Free RoHS 6 fully compliant RoHS 6 fully compliant options available -xxxE denotes a lead-free product

The HCPL-800J is a galvanically isolated Powerline Data Access Arrangement IC. It provides the key features of isolation, Tx line driver and Rx amplifier as required in a powerline modem application.

Used together with a simple LC coupling circuit, the HCPL-800J offers a highly integrated, cost effective Analogue Front End AFE solution. Optical coupling technology provides very high isolation mode rejection, facilitating excellent EMI and EMC performance. Application robustness is enhanced by the inherent properties of opto-isolation devices, to effectively block the transfer of damaging surge transients.

Excellent transmitter performance is achieved with the use of a high efficiency, low distortion line driver stage. Transmitter robustness is further enhanced with integrated load detection and over-temperature protection functions.

The HCPL-800J is designed to work with various transceiver ICs and significantly simplify the implementation of a powerline modem.

Connection Diagram
• -60 dB Overall Tx Distortion
• 25 nV/ Typical Input Referred Noise
• Load Detection Function
• Under-Voltage Detection
• Over-Temperature Shutdown
• Highly Efficient Tx Line Driver
• Built-in Rx Amplifier
• Temperature Range -40°C to +85°C
• Regulatory Approvals pending UL, CSA, IEC/EN/DIN

EN 60747-5-2
• Suitable for FCC Part 15 and EN50065-1 Compliant

Design
• Automatic Meter Reading AMR
• Powerline Modem
• Home Automation/Control
• Security and Surveillance
• General Purpose Isolated Transceiver
• Internet Appliances

TX-EN TX

Powerline Transceiver IC ENDEC

RX STATUS

VCC1
1 Tx-en 2 Tx-in 3 Rx-PD-out 4 Rx-Amp-in 5 Status 6 Rx-out 7 VCC1 8 GND1

HCPL-800J

GND2 16 Tx-out 15

VCC2 14 Tx-PD-out 13

Tx-LD-in 12 Cext 11

Rx-in 10 Rref 9

GND2

VCC2

Filter GND2 Filter

GND1

GND2

N GND2

CAUTION It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD.

Block Diagram

Tx -en 1 2

Tx -in

V CC1

GND1 8

Status 5 Rx -out 6

Tx -PD -out Tx -LD -in

Control IC

Status Detection G R2

Tx LED Driver

Shield

G T2 Tx
Ordering Information

HCPL-800J are UL Recognized with 3750 Vrms for 1 minute per UL1577.

Option RoHS Compliant

Packaging

Surface Mount Tape & Reel

IEC/EN/DIN EN 60747-5-2 Quantity

HCPL-800J
-000E

SO-16
45 per tube
-500E

SO-16
850 per reel

To order, choose a part number from the part number column and combine with the desired option from the option column to form an order entry.

Example 1:

ACPL-800J-500E to order product of SO-16 package in Tape and Reel packaging with IEC/EN/DIN EN 60747-5-2 Safety Approval in RoHS compliant..

Option datasheets are available. Contact your Avago sales representative or authorized distributor for information.

Remarks The notation ‘#XXX’ is used for existing products, while new products launched since 15th July 2001 and RoHS compliant option will use ‘-XXXE‘.

Package Outline Drawings
16-Lead Surface Mount

Land Pattern Recommendation
16 15 14 13 12 11 10 9

A 800J YYWW
± ±

TYPE NUMBER DATE CODE
12345678
± ± 9°
± ±

ALL LEADS TO BE COPLANAR ±
± ±

MIN. ±
± ±

STANDOFF

DIMENSIONS IN INCHES MILLIMETERS .

NOTES INITIAL AND CONTINUED VARIATION IN THE COLOR OF THE HCPL-800J’s WHITE MOLD COMPOUND IS NORMAL AND DOES NOT AFFECT

DEVICE PERFORMANCE OR RELIABILITY. FLOATING LEAD PROTRUSION IS MAX.

Package Characteristics

All specifications and figures are at the nominal typical operating conditions of VCC1 = 5 V, GND1 = 0 V, VCC2 = 5 V, GND2 = 0 V and TA = +25°C.

Parameter Control IC - Line IC Momentary Withstand Voltage

Resistance Control IC - Line IC

Capacitance Control IC - Line IC

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived HCPL-800J-500 Datasheet file may be downloaded here without warranties.

Datasheet ID: HCPL-800J-500 520253