EIRM-EXTEND
EIRM-EXTEND Datasheet
EIRM-EXTEND 1412-ds - 1/4 2011 B&B Electronics. All rights reserved
| Part | Datasheet |
|---|---|
EIRM-EXTEND |
EIRM-EXTEND (pdf) |
| PDF Datasheet Preview |
|---|
| B&B ELECTRONICS EIRM-EXTEND 1412-ds - 1/4 2011 B&B Electronics. All rights reserved EIRM-EXTEND Managed Hardened 10/100BASE-TX Ethernet Extender Features Extends Ethernet communications up to 1900 meters Complies with NEMA TS1 & TS2 Environmental requirements for Traffic control equipment Complies with IEC61000-6-2 EMC Generic standard immunity for Industrial environment Supports SNMP allowing easy management of our Ethernet Extender along with monitoring connected devices. Operates transparent to higher layer protocols such as TCP/IP Ethernet Port 10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX Ethernet Extender RJ-11 and Terminal Block Ports Supports DIN-Rail Panel Rack Mounting installation Ten communications speeds with speed indicator LEDs on front panel of unit. From 300meters 984ft. to 1,900meters 6,232ft. Support external Hardware Watch Dog Support Web, CLI, SNMP management Interface Link Status for VDSL, Ethernet , Redundant power inputs 12 to 32VDC Terminal Block ;12VDC DC Jack -40°C to 75°C -40°F to 167°F operating temperature range Hardened IP30 aluminum case Functional Description B&B Electronics’ Industrial Hardened EIRM-EXTEND is a point-to-point Managed Ethernet Extender designed to operate in harsh environments that efficiently extends 10/100 Ethernet circuits to over 300meters 984feet at 50Mbps using existing cross-over pair copper wire. The EIRM-EXTEND operates at temperatures ranging from -40°C to 75°C -40°F to 167°F and is tested for functional operation -40°C to 85°C -40°F to 185°F . The EIRM-EXTEND will allow Ethernet connectivity in existing facilities without pulling extra cable. This is the perfect solution to Ethernet on the factory -floor where systems have been upgraded from slower serial communications to Ethernet networking. Installation is easy with a single switch setting one end is set for local and the other remote. The EIRM-EXTEND is used in pairs to extend Ethernet connectivity over existing voice grade copper wire. The EIRM-EXTEND provides LED display for Power, VDSL speed and Ethernet connection status. The EIRM-EXTEND also provides several advanced functions such as System, SNMP, F/W upgrade, and Load Default setting through the Web based browser to enhance total networking performance. Model Number Ethernet Ports EIRM-EXTEND Max Distance 1900m Max Speed 50Mbps VDSL Ports RJ-11 and Terminal Block Temp Mounting -40 to 75C Din, Panel EIRPMKT PRODUCT INFORMATION International Office 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104 European Office Westlink Commercial Park Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445 B&B ELECTRONICS Accessories Model No. MDR-20-24 MDR-40-24 PS12VDC3P EIRPMKT C5UMB3FBG C5UMB7FBG EIRM-EXTEND 1412-ds - 2/4 2011 B&B Electronics. All rights reserved Description DIN rail mount power supply 24VDC, A output power DIN rail mount power supply 24VDC, A output power Hardened AC power adapter, 12 VDC, 36W, US plug for EIR and EIRM series Panel Mount Kit For Switches Ethernet Category 5e patch cord, 3 ft. 0.9m , beige Ethernet Category 5e patch cord, 7 ft. 0.9m , beige PRODUCT INFORMATION International Office 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104 European Office Westlink Commercial Park Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445 B&B ELECTRONICS EIRM-EXTEND 1412-ds - 3/4 2011 B&B Electronics. All rights reserved Specifications Technology Standards: |
| More datasheets: AK8783 | 2263 | 18401 | A2703B/UY/S530-A3 | A93B/4SYG/S530-E2 | PT204-6B | 76000752 | DN-1942U-6/8-SW | 42-05011 | FQA48N20 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived EIRM-EXTEND Datasheet file may be downloaded here without warranties.