HCPL-7601-300E

HCPL-7601-300E Datasheet

HCPL-7601/7611 CMOS/TTL Compatible, Low Input Current, High Speed, High CMR Optocoupler

Part	Datasheet
HCPL-7601-300E	HCPL-7601-300E (pdf)

Related Parts	Information
HCPL-7601	HCPL-7601
HCPL-7611-000E	HCPL-7611-000E
HCPL-7601#500	HCPL-7601#500
HCPL-7601#300	HCPL-7601#300
HCPL-7611#300	HCPL-7611#300
HCPL-7611-300E	HCPL-7611-300E
HCPL-7601-500E	HCPL-7601-500E
HCPL-7611-500E	HCPL-7611-500E
HCPL-7611	HCPL-7611
HCPL-7601-000E	HCPL-7601-000E
HCPL-7611#500	HCPL-7611#500

PDF Datasheet Preview
HCPL-7601/7611 CMOS/TTL Compatible, Low Input Current, High Speed, High CMR Optocoupler Data Sheet The HCPL-7601/11 is a low input current version of the HCPL-2601/11 and 6N137 without enable . The optically coupled gates combine an AlGaAs highefficiency light emitting diode and an integrated high gain photon detector to create a low input current device for low power applications. The output of the detector IC is an open collector Schottky-clamped transistor. The internal shield provides a guaranteed common mode transient immunity specification of 10,000 V/µs HCPL-7611 . This unique design provides maximum ac and dc circuit isolation while achieving CMOS and TTL compatibility. The optocoupler ac and dc operational parameters are guaranteed from -40°C to 85°C with no derating required allowing trouble free system performance. This product is suitable for high speed logic interfacing, input/output buffering, and applications that require low input-current switching levels. Schematic IF 2+ ICC IO 8 VCC 6 VO VF 3- HCPL-7601/11 SHIELD GND 5 Features • Low input current version of HCPL-2601/11 and 6N137 • Wide input current range IF = 2 mA to 10 mA • CMOS/TTL compatible • Guaranteed switching threshold IF = 2 mA max. • Internal shield for high Common Mode Rejection CMR HCPL-7601 5,000 V/µs typical at VCM = 50 V, IF = 4 mA HCPL-7611 15,000 V/µs typical at VCM = 1000 V, IF = 4 mA • High speed 10 Mbd typical • Guaranteed ac and dc performance over temperature -40°C to 85°C • IEC/EN/DIN EN 60747-5-2 approval VIORM = 600 VRMS • UL recognized 3750 VRMS, 1 minute • CSA accepted • Low supply current requirement • Low TPSK 40 ns guaranteed • Lead-free option “-000E” Applications • Isolated line receiver • Simplex/multiplex data transmission • Programmable logic controllers • Computer-peripheral interface • Microprocessor system interface • Digital isolation for A/D, D/A conversion • Switching power supply • Instrument input/output isolation • Ground loop elimination • Pulse transformer replacement USE OF A µF BYPASS CAPACITOR CONNECTED BETWEEN PINS 5 AND 8 IS REQUIRED SEE NOTE TRUTH TABLE POSITIVE LOGIC LED OUTPUT CAUTION The small device geometries inherent to the design of this bipolar component increase the component’s susceptibility to damage from electrostatic discharge ESD . It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD. The HCPL-7601/11 family offers many features that are especially beneficial to system designers. The low input current requirements and guaranteed switching threshold 2 mA max. allows the LED to be driven directly by any standard high-speed CMOS gate e.g. 74HC/HCT . This will simplify designs by eliminating the need for special driver circuits and result in lower part counts and greater system reliability while freeing up valuable printed circuit board space. The wide current input range of 2 mA to 10 mA and guaranteed ac and dc performance over a wide temperature range will also simplify designs. Low supply current requirements mean lower power dissipation allowing for the use of a smaller, less expensive power supply. The high speed 10 Mbd typ. and low propagation delay skew Tpsk 40 ns guaranteed allow for easier design of high speed parallel applications. The world-wide regulatory approval UL/CSA/IEC/ EN/DIN EN 60747-5-2 will facilitate the acceptance of the end product in international markets. Regulatory Information The HCPL-7601 and HCPL-7611 have been approved by the following organizations: UL Approved under UL 1577, component recognition FILE E55361 . IEC/EN/DIN EN 60747-5-2 Approved under IEC 60747-5-2:1997 + A1:2002 EN 60747-5-2:2001 + A1:2002 DIN EN 60747-5-2 VDE 0884 Teil 2 :2003-01 This optocoupler is suitable for “safe electrical isolation” only within the safety limit data. Maintenance of the safety data shall be ensured by means of protective circuits. Can be used for safe electrical separation between ac mains and SELV safety extra-low voltage in equipment according to the following specifications: DIN VDE DIN VDE Reference voltage VDE 011b Tab 4 630 Vac. CSA Approved under CSA22.2 No. 0 General Requirements, Canadian Electrical Code, Part II and CSA Component Acceptance Notice #5, File CA Ordering Information HCPL-7xxx is UL Recognized with 3750 Vrms for 1 minute per UL1577 and is approved under CSA Component Acceptance Notice #5, File CA Option Part non RoHS Number Compliant Package Surface Mount HCPL-7601 -000E no option 300 mil DIP-8 HCPL-7611 -300E #300 -500E #500 Gull Wing Tape & Reel UL 5000 Vrms/ 1 Minute rating IEC/EN/DIN EN 60747-5-2 Quantity 50 per tube 50 per tube 1000 per reel To order, choose a part number from the part number column and combine with the desired option from the option column to form an order entry. Combination of Option 020 and Option 060 is not available. Example 1 HCPL-7611-560E to order product of 300 mil DIP Gull Wing Surface Mount package in Tape and Reel packaging with IEC/EN/DIN EN 60747-5-2 Safety Approval and RoHS compliant. Example 2 HCPL-7601 to order product of 300 mil DIP package in Tube packaging and non RoHS compliant. Option datasheets are available. Contact your Avago sales representative or authorized distributor for information. Remarks The notation ‘#XXX’ is used for existing products, while new products launched since July 15, 2001 and RoHS compliant will use Absolute Maximum Ratings No Derating Required up to 85°C Storage Temperature -55° C to +125° C Operating Temperature -40° C to +85° C Lead Solder Temperature 260° C for 10 s Selection for higher output voltage up to 20 V is available. Recommended Operating Conditions Parameter Input Voltage, Low Level Input Current, High Level Supply Voltage, Output Fan Out RL= 1 Symbol VFL IFH VCC N Operating Temperature Output Pull-up Resistor Min. Max. Units Loads 330 4 k Package Outline Drawing Standard DIP Package 87 6 5 A 7601 YYWW PIN ONE 1 2 TYPE NUMBER DATE CODE 5° TYP. MAX. MAX.

PDF Datasheet Preview

HCPL-7601/7611 CMOS/TTL Compatible, Low Input Current, High Speed, High CMR Optocoupler

Data Sheet

The HCPL-7601/11 is a low input current version of the HCPL-2601/11 and 6N137 without enable . The optically coupled gates combine an AlGaAs highefficiency light emitting diode and an integrated high gain photon detector to create a low input current device for low power applications. The output of the detector IC is an open collector Schottky-clamped transistor. The internal shield provides a guaranteed common mode transient immunity specification of 10,000 V/µs HCPL-7611 .

This unique design provides maximum ac and dc circuit isolation while achieving CMOS and TTL compatibility. The optocoupler ac and dc operational parameters are guaranteed from -40°C to 85°C with no derating required allowing trouble free system performance. This product is suitable for high speed logic interfacing, input/output buffering, and applications that require low input-current switching levels.

Schematic

IF 2+

ICC IO
8 VCC 6 VO

VF 3-

HCPL-7601/11 SHIELD

GND 5

Features
• Low input current version of HCPL-2601/11 and 6N137
• Wide input current range IF = 2 mA to 10 mA
• CMOS/TTL compatible
• Guaranteed switching threshold IF = 2 mA max.
• Internal shield for high Common Mode Rejection CMR

HCPL-7601 5,000 V/µs typical at VCM = 50 V, IF = 4 mA HCPL-7611 15,000 V/µs typical at VCM = 1000 V, IF = 4 mA
• High speed 10 Mbd typical
• Guaranteed ac and dc performance over temperature -40°C to 85°C
• IEC/EN/DIN EN 60747-5-2 approval VIORM = 600 VRMS
• UL recognized 3750 VRMS, 1 minute
• CSA accepted
• Low supply current requirement
• Low TPSK 40 ns guaranteed
• Lead-free option “-000E”

Applications
• Isolated line receiver
• Simplex/multiplex data transmission
• Programmable logic controllers
• Computer-peripheral interface
• Microprocessor system interface
• Digital isolation for A/D, D/A conversion
• Switching power supply
• Instrument input/output isolation
• Ground loop elimination
• Pulse transformer replacement

USE OF A µF BYPASS CAPACITOR CONNECTED BETWEEN PINS 5 AND 8 IS REQUIRED SEE NOTE

TRUTH TABLE POSITIVE LOGIC

LED OUTPUT

CAUTION The small device geometries inherent to the design of this bipolar component increase the component’s susceptibility to damage from electrostatic discharge ESD . It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD.

The HCPL-7601/11 family offers many features that are especially beneficial to system designers. The low input current requirements and guaranteed switching threshold 2 mA max. allows the LED to be driven directly by any standard high-speed CMOS gate e.g. 74HC/HCT . This will simplify designs by eliminating the need for special driver circuits and result in lower part counts and greater system reliability while freeing up valuable printed circuit board space.

The wide current input range of 2 mA to 10 mA and guaranteed ac and dc performance over a wide temperature range will also simplify designs. Low supply current requirements mean lower power dissipation allowing for the use of a smaller, less expensive power supply. The high speed 10 Mbd typ. and low propagation delay skew Tpsk 40 ns guaranteed allow for easier design of high speed parallel applications. The world-wide regulatory approval UL/CSA/IEC/ EN/DIN EN 60747-5-2 will facilitate the acceptance of the end product in international markets.

Regulatory Information The HCPL-7601 and HCPL-7611 have been approved by the following organizations:

UL Approved under UL 1577, component recognition FILE E55361 .

IEC/EN/DIN EN 60747-5-2 Approved under IEC 60747-5-2:1997 + A1:2002 EN 60747-5-2:2001 + A1:2002 DIN EN 60747-5-2 VDE 0884

Teil 2 :2003-01 This optocoupler is suitable for “safe electrical isolation” only within the safety limit data. Maintenance of the safety data shall be ensured by means of protective circuits.

Can be used for safe electrical separation between ac mains and SELV safety extra-low voltage in equipment according to the following specifications:

DIN VDE DIN VDE

Reference voltage VDE 011b Tab 4 630 Vac.

CSA Approved under CSA22.2 No. 0 General Requirements, Canadian Electrical Code, Part II and CSA Component Acceptance Notice #5, File CA
Ordering Information HCPL-7xxx is UL Recognized with 3750 Vrms for 1 minute per UL1577 and is approved under CSA Component Acceptance Notice #5, File CA

Option

Part
non RoHS

Number Compliant Package

Surface Mount

HCPL-7601 -000E
no option 300 mil DIP-8

HCPL-7611 -300E
#300
-500E
#500

Gull Wing

Tape & Reel

UL 5000 Vrms/ 1 Minute rating

IEC/EN/DIN EN 60747-5-2 Quantity
50 per tube 50 per tube 1000 per reel

To order, choose a part number from the part number column and combine with the desired option from the option column to form an order entry. Combination of Option 020 and Option 060 is not available.

Example 1 HCPL-7611-560E to order product of 300 mil DIP Gull Wing Surface Mount package in Tape and Reel packaging with IEC/EN/DIN EN 60747-5-2 Safety Approval and RoHS compliant.

Example 2 HCPL-7601 to order product of 300 mil DIP package in Tube packaging and non RoHS compliant.

Option datasheets are available. Contact your Avago sales representative or authorized distributor for information.

Remarks The notation ‘#XXX’ is used for existing products, while new products launched since July 15, 2001 and RoHS compliant will use

Absolute Maximum Ratings

No Derating Required up to 85°C Storage Temperature -55° C to +125° C Operating Temperature -40° C to +85° C Lead Solder Temperature 260° C for 10 s
*Selection for higher output voltage up to 20 V is available.

Recommended Operating Conditions

Parameter Input Voltage, Low Level Input Current, High Level Supply Voltage, Output Fan Out RL= 1

Symbol VFL IFH VCC N

Operating Temperature

Output Pull-up Resistor

Min. Max. Units

Loads
330 4 k

Package Outline Drawing Standard DIP Package
87 6 5

A 7601 YYWW

PIN ONE 1 2

TYPE NUMBER*

DATE CODE
5° TYP.

MAX. MAX.

More datasheets: 7123 | 7211 | 7212 | 7222 | 7221 | 7213 | FDDS10H04A_F085A | HCPL-7601 | HCPL-7611-000E | HCPL-7601#500

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived HCPL-7601-300E Datasheet file may be downloaded here without warranties.

Datasheet ID: HCPL-7601-300E 520252