BCM5221A4KPTG

BCM5221A4KPTG Datasheet

BCM5221

Part	Datasheet
BCM5221A4KPTG	BCM5221A4KPTG (pdf)

Related Parts	Information
BCM5221A4KMLG	BCM5221A4KMLG
BCM5221KPB	BCM5221KPB

PDF Datasheet Preview
BCM5221 Brief 10/100BASE-TX/FX Transceiver SUMMARY OF BENEFITS • Power Supply 2.5V or 3.3V • Integrated voltage regulator to allow operation from a single supply source • Power Consumption <175 mW • Unique energy detection circuit to enable intelligent power management • HP Auto-MDIX • Cable length indication • Cable noise level indication • Robust CESD tolerance • Cable length greater than 145 meters • Well under 10 PPM defect ratio quality • ±10% voltage tolerance • Industrial temperature range to 85°C package options available • MII and RMII configurable • IEEE JTAG scan chain support • MII management via serial port • Layout compatible with BCM5201 • 10BASE-T/100BASE-TX/FX IEEE 802.3u Fast Ethernet transceiver • Glueless TX-to-FX media conversion • 64-pin TQFP with 64-pin BGA package, 48-pin KML package; RoHS 5/6 and 6/6 package options available • Low power and intelligent power management • Increased active working time • Prolonged battery life in active standby • Increased reliability • Improved ease of use and installation, reduced support cost • Straight-through or crossover cables are accommodated, and such accommodation is independent of installation • Advanced cable diagnostic features to enable remote monitoring and debug of cabling infrastructure • Resistance to cable-sourced electrostatic discharge CESD to reduce product destruction and product returns • DSP-based Signi-PHY architecture to ensure performance over temperature, voltage, and process variation • Proven in over two billion Fast Ethernet ports • Ease of manufacturing with JTAG support • Fully integrated TX/FX PHY transceiver MII/RMII-to-TX magnetics or FX optics • Lower system cost • Simplified system and board design • Servers - Network Controller - Sideband Interface NC-SI using RMII interface • Digital TV, PCMCIA/CardBus cards, LAN on motherboard LOM , IP phones, cable modems, set-top boxes and print servers, wireless access points, and embedded telecom Embedded 10/100 BASE-TX Application System Bus SRAM Media Access Controller MAC MII/RMII BCM5221 10/100 BASE-TX Single-Channel PHY Transceiver Magnetics Module RJ-45 Connector OVERVIEW BCM5221 Block Diagram The BCM5221 Lowest-Power Fast Ethernet PHY With a power dissipation of 175 mW, the BCM5221 is the industry’s lowest-power Fast Ethernet PHY. It features an integrated voltage regulator, and can be supplied by either a 2.5V or 3.3V power source. In addition, the BCM5221 has several intelligent power-down states that conserve power, yet allow products based on it to automatically turn on when needed. The BCM5221 includes a unique Intelligent Power-Management feature that powers down the device if energy is not detected on the cable. This feature is especially useful for portable and power-sensitive applications such as laptop LAN card adapters. The BCM5221 allows PCMCIA or CardBus adapters to remain plugged in and draw virtually no energy even if the client is no longer connected to the network. Because most laptop users do not remove their LAN PC card when working remotely, this feature results in a noticeably extended battery life for laptop computer users. The BCM5221 can be set to periodically wake up at a user-defined interval, allowing the product to initiate keep-alive traffic on the network. For lowest power consumption, the BCM5221 can be put in a power-off state mW . Network Tolerance The BCM5221 includes features that simplify the installation and maintenance of local area networks. One such feature is the HP AutoMDIX capability, which automatically detects and corrects crossed cables. With HP Auto-MDIX, the installer does not need to know what is on the other end of the network cable the BCM5221 automatically switches its transmit and receive circuitry to accommodate the link partner’s polarity. CESD is a recently discovered phenomenon that occurs when an electrically charged network cable is plugged into a networked product, an issue becoming more prevalent with recent cable installations. The BCM5221 has been designed and tested to withstand over 5 KV of CESD which, unlike other transceivers, prevents the device from being destroyed in a CESD event. DSP-Based PHY Technology The BCM5221 builds on Broadcom's proven DSP PHY design and full custom circuit design techniques to create a highly integrated and robust physical layer solution. DSP techniques allow the BCM5221 to achieve high interoperability and to exhibit robust performance across voltage ±10% , temperature to 85°C , and process variations. Broadcom's DSP-based, technology has been proven in the shipment of over two billion Fast Ethernet ports. Broadcom's superior quality has resulted in a failure rate well under 10 PPM. Applications for the BCM5221 that take advantage of its low power and high network tolerance: • Servers - Network Controller - Sideband • Cable modems Interface NC-SI using RMII interface • Digital TV • Set-Top boxes

PDF Datasheet Preview

BCM5221

Brief
10/100BASE-TX/FX Transceiver

SUMMARY OF BENEFITS
• Power Supply 2.5V or 3.3V
• Integrated voltage regulator to allow operation from a single
supply source
• Power Consumption <175 mW
• Unique energy detection circuit to enable intelligent power management
• HP Auto-MDIX
• Cable length indication
• Cable noise level indication
• Robust CESD tolerance
• Cable length greater than 145 meters
• Well under 10 PPM defect ratio quality
• ±10% voltage tolerance
• Industrial temperature range to 85°C package options
available
• MII and RMII configurable
• IEEE JTAG scan chain support
• MII management via serial port
• Layout compatible with BCM5201
• 10BASE-T/100BASE-TX/FX IEEE 802.3u

Fast Ethernet transceiver
• Glueless TX-to-FX media conversion
• 64-pin TQFP with 64-pin BGA package, 48-pin KML package;

RoHS 5/6 and 6/6 package options available
• Low power and intelligent power management
• Increased active working time
• Prolonged battery life in active standby
• Increased reliability
• Improved ease of use and installation, reduced support cost
• Straight-through or crossover cables are accommodated, and such accommodation is independent of installation
• Advanced cable diagnostic features to enable remote monitoring and debug of cabling infrastructure
• Resistance to cable-sourced electrostatic discharge CESD to reduce product destruction and product returns
• DSP-based Signi-PHY architecture to ensure performance over temperature, voltage, and process variation
• Proven in over two billion Fast Ethernet ports
• Ease of manufacturing with JTAG support
• Fully integrated TX/FX PHY transceiver MII/RMII-to-TX magnetics or FX optics
• Lower system cost
• Simplified system and board design
• Servers - Network Controller - Sideband Interface NC-SI using RMII interface
• Digital TV, PCMCIA/CardBus cards, LAN on motherboard LOM , IP phones, cable modems, set-top boxes and print servers, wireless access points, and embedded telecom

Embedded 10/100 BASE-TX Application

System Bus

SRAM

Media Access Controller MAC

MII/RMII

BCM5221
10/100 BASE-TX Single-Channel PHY Transceiver

Magnetics Module

RJ-45 Connector

OVERVIEW

BCM5221 Block Diagram

The BCM5221 Lowest-Power Fast Ethernet PHY

With a power dissipation of 175 mW, the BCM5221 is the industry’s lowest-power Fast Ethernet PHY. It features an integrated voltage regulator, and can be supplied by either a 2.5V or 3.3V power source. In addition, the BCM5221 has several intelligent power-down states that conserve power, yet allow products based on it to automatically turn on when needed.

The BCM5221 includes a unique Intelligent Power-Management feature that powers down the device if energy is not detected on the cable. This feature is especially useful for portable and power-sensitive applications such as laptop LAN card adapters. The BCM5221 allows PCMCIA or CardBus adapters to remain plugged in and draw virtually no energy even if the client is no longer connected to the network. Because most laptop users do not remove their LAN PC card when working remotely, this feature results in a noticeably extended battery life for laptop computer users.

The BCM5221 can be set to periodically wake up at a user-defined interval, allowing the product to initiate keep-alive traffic on the network. For lowest power consumption, the BCM5221 can be put in a power-off state mW .

Network Tolerance

The BCM5221 includes features that simplify the installation and maintenance of local area networks. One such feature is the HP AutoMDIX capability, which automatically detects and corrects crossed cables. With HP Auto-MDIX, the installer does not need to know what is on the other end of the network cable the BCM5221 automatically switches its transmit and receive circuitry to accommodate the link partner’s polarity.

CESD is a recently discovered phenomenon that occurs when an electrically charged network cable is plugged into a networked product, an issue becoming more prevalent with recent cable installations. The BCM5221 has been designed and tested to withstand over 5 KV of CESD which, unlike other transceivers, prevents the device from being destroyed in a CESD event.

DSP-Based PHY Technology

The BCM5221 builds on Broadcom's proven DSP PHY design and full custom circuit design techniques to create a highly integrated and robust physical layer solution. DSP techniques allow the BCM5221 to achieve high interoperability and to exhibit robust performance across voltage ±10% , temperature to 85°C , and process variations. Broadcom's DSP-based, technology has been proven in the shipment of over two billion Fast Ethernet ports. Broadcom's superior quality has resulted in a failure rate well under 10 PPM.

Applications for the BCM5221 that take advantage of its low power and high network tolerance:
• Servers - Network Controller - Sideband
• Cable modems

Interface NC-SI using RMII interface
• Digital TV
• Set-Top boxes

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived BCM5221A4KPTG Datasheet file may be downloaded here without warranties.

Datasheet ID: BCM5221A4KPTG 520204