ASMC-QHB2-TCD0E

ASMC-QHB2-TCD0E Datasheet

ASMC-QxB2-Txxxx EnvisiumTM 0.5W Power PLCC-4 Surface Mount LED Indicator

Part	Datasheet
ASMC-QHB2-TCD0E	ASMC-QHB2-TCD0E (pdf)

Related Parts	Information
ASMC-QAB2-TAC0E	ASMC-QAB2-TAC0E

PDF Datasheet Preview
ASMC-QxB2-Txxxx EnvisiumTM 0.5W Power PLCC-4 Surface Mount LED Indicator Data Sheet EnvisiumTM EnvisiumTM is the premier class of mid-Power LEDs using TS AlInGaP chip technology. EnvisiumTM LEDs unparalleled performance, engineering and design The EnvisiumTM 0.5W Power PLCC-4 SMT LED is an extension of EnvisiumTM Power PLCC-4 SMT LEDs. The package can be driven at high current due to its superior package design. The product is able to dissipate the heat more compared to the EnvisiumTM Power PLCC4 SMT LEDs. These LEDs produce higher light output with better performance compared to the EnvisiumTM Power PLCC-4 SMT LED. The EnvisiumTM 0.5W Power PLCC-4 SMT LEDs are designed for higher reliability, better performance, and operate under a wide range of environmental conditions. The performance characteristics of these new mid-power LEDs make them uniquely suitable for use in harsh conditions such as in automotive applications, and in electronics signs and signals. To facilitate easy pick and place assembly, the LEDs are packed in EIA-compliant tape and reel. Every reel is shipped in single intensity and color bin except for red , to provide close uniformity. These LEDs are compatible with the IR solder process. EnvisiumTM 0.5W Power PLCC-4 SMT LED is available in red orange & amber colors. x Industry Standard PLCC 4 platform x 1.9mm x High reliability LED package x Mid-Power intensity brightness with optimum performance using TS AllnGaP chip technologies x Available in Red Orange and Amber colors x High optical x Available in 8mm carrier tape and 7 inch reel x Low Thermal Resistance x Super wide viewing angle at 120q x Longer life time with minimum degradation due to enhanced silicone resin material x JEDEC MSL 2a Exterior automotive - Turn signals - Side repeaters - CHSML - Rear combination lamp - Side markers - Truck clearance lamp Electronic signs and signals - Channel lettering - Contour lighting - Indoor variable message sign automation, home appliances, industrial equipment - Front panel backlighting - Push button backlighting - Display backlighting TYP. Component Dimensions ± ± TYP. CATHODE MARKING Note All Dimensions in millimeters. Lead Polarity as shown in Figure Terminal Finish Ag plating Encapsulation material Silicone resin Figure Package Drawing Table Device Selection Guide TJ = 25 °C Color Luminous Flux, IV [1] lm Min. Flux lm Typ. Flux lm Amber ASMC-QAB2-TAC0E Red Orange ASMC-QHB2-TCD0E Max. Flux lm Test Current mA 150 Dice Technology AlInGaP IV is the total luminous output as measured with an integrating sphere at mono pulse conditions. Tolerance = ±12% Part Numbering System A S M C - Q X1 B 2 - T X2 X3 X4 X5 Packaging Option Color Bin Selection Max. Flux Bin Min. Flux Bin Color A - Amber H - Red Orange Table Absolute Maximum Ratings TA = 25 qC ASMC-QxB2-Txxxx 150 mA 300 mA 470 mW 5V 125 °C -40 °C to +100 °C -40 °C to +100 °C Notes Derate Linearly as shown in Figure Duty Factor = 10%, Frequency = 1kHz Table Optical Characteristics TJ = 25 qC

PDF Datasheet Preview

ASMC-QxB2-Txxxx EnvisiumTM 0.5W Power PLCC-4 Surface Mount LED Indicator

Data Sheet

EnvisiumTM

EnvisiumTM is the premier class of mid-Power LEDs using TS AlInGaP chip technology. EnvisiumTM LEDs unparalleled performance, engineering and design

The EnvisiumTM 0.5W Power PLCC-4 SMT LED is an extension of EnvisiumTM Power PLCC-4 SMT LEDs. The package can be driven at high current due to its superior package design. The product is able to dissipate the heat more compared to the EnvisiumTM Power PLCC4 SMT LEDs. These LEDs produce higher light output with better performance compared to the EnvisiumTM Power PLCC-4 SMT LED.

The EnvisiumTM 0.5W Power PLCC-4 SMT LEDs are designed for higher reliability, better performance, and operate under a wide range of environmental conditions. The performance characteristics of these new mid-power LEDs make them uniquely suitable for use in harsh conditions such as in automotive applications, and in electronics signs and signals.

To facilitate easy pick and place assembly, the LEDs are packed in EIA-compliant tape and reel. Every reel is shipped in single intensity and color bin except for red , to provide close uniformity. These LEDs are compatible with the IR solder process.

EnvisiumTM 0.5W Power PLCC-4 SMT LED is available in red orange & amber colors.
x Industry Standard PLCC 4 platform x 1.9mm x High reliability LED package x Mid-Power intensity brightness with optimum
performance using TS AllnGaP chip technologies x Available in Red Orange and Amber colors x High optical x Available in 8mm carrier tape and 7 inch reel x Low Thermal Resistance
x Super wide viewing angle at 120q x Longer life time with minimum degradation due to
enhanced silicone resin material x JEDEC MSL 2a

Exterior automotive - Turn signals - Side repeaters - CHSML - Rear combination lamp - Side markers - Truck clearance lamp

Electronic signs and signals - Channel lettering - Contour lighting - Indoor variable message sign
automation, home appliances, industrial equipment - Front panel backlighting - Push button backlighting - Display backlighting

TYP.

Component Dimensions
± ±

TYP.

CATHODE

MARKING

Note All Dimensions in millimeters. Lead Polarity as shown in Figure Terminal Finish Ag plating Encapsulation material Silicone resin

Figure Package Drawing

Table Device Selection Guide TJ = 25 °C

Color

Luminous Flux, IV [1] lm Min. Flux lm Typ. Flux lm

Amber

ASMC-QAB2-TAC0E

Red Orange ASMC-QHB2-TCD0E

Max. Flux lm

Test Current mA 150

Dice Technology AlInGaP

IV is the total luminous output as measured with an integrating sphere at mono pulse conditions.

Tolerance = ±12%

Part Numbering System

A S M C - Q X1 B 2 - T X2 X3 X4 X5

Packaging Option Color Bin Selection Max. Flux Bin Min. Flux Bin Color A - Amber H - Red Orange

Table Absolute Maximum Ratings TA = 25 qC

ASMC-QxB2-Txxxx 150 mA 300 mA 470 mW 5V 125 °C -40 °C to +100 °C -40 °C to +100 °C

Notes Derate Linearly as shown in Figure Duty Factor = 10%, Frequency = 1kHz

Table Optical Characteristics TJ = 25 qC

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ASMC-QHB2-TCD0E Datasheet file may be downloaded here without warranties.

Datasheet ID: ASMC-QHB2-TCD0E 520132