AMMP-6441-TR1G

AMMP-6441-TR1G Datasheet

AMMP-6441 36 - 40 GHz, 0.4W Power Amplifier in SMT Package

Part	Datasheet
AMMP-6441-TR1G	AMMP-6441-TR1G (pdf)

Related Parts	Information
AMMP-6441-TR2G	AMMP-6441-TR2G
AMMP-6441-BLKG	AMMP-6441-BLKG

PDF Datasheet Preview
AMMP-6441 36 - 40 GHz, 0.4W Power Amplifier in SMT Package Data Sheet The AMMP-6441 MMIC is a 0.4W power amplifier in a surface mount package designed for use in transmitters that operate at frequencies between 36GHz and 40GHz. In the operational band, it provides 26 dBm of output power P-1dB and 20dB of small-signal gain. • LMDS & Pt-Pt mmW Long Haul • Microwave Radio systems • WLL and MMDS loops Package Diagram • 5x5mm SMT package • watt output power • 50 match on input and output Typical Performance Vd=5V, Idsq=0.45A • Frequency range 36 to 40 GHz • Small signal Gain of 20dB • Output power of 26dBm Typ. • Input and Output return losses -10dB Functional Block Diagram Vg Vd1 Vd2 RF IN 8 4 RF OUT Vg Vd1 Vd2 Note This MMIC uses depletion mode pHEMT devices. Negative supply is used for DC gate biasing. 123 8 Pin Function 4 RF OUT RF IN RoHS-Exemption Please refer to hazardous substances table on page Attention Observe Precautions for handling electrostatic sensitive devices. ESD Machine Model Class A 40V ESD Human Body Model Class 0 150V Refer to Avago Application Note A004R Electrostatic Discharge Damage and Control. Note MSL Rating = Level 2A Electrical Specifications Small/Large -signal data measured in a fully de-embedded test fixture form TA = 25°C. Pre-assembly into package performance verified 100% on-wafer per AMMC-6120 published specifications. This final package part performance is verified by a functional test correlated to actual performance at one or more frequencies. Specifications are derived from measurements in a 50 Ω test environment. Aspects of the amplifier performance may be improved over a more narrow bandwidth by application of additional conjugate, linearity, or low noise matching. Table RF Electrical Characteristics TA=25°C, Vd=5.0V, Idq=0.45V, Vg=-1V, Zo=50 Ω Parameter Typ. Unit Operational Frequency, Freq Small-signal Gain, Gain Output Power at 1dB Gain Compression, P-1dB Relative Third Order Inter-modulation level Po=+12dBm, SCL , IM3 Table Recommended Operating Range Ambient operational temperature TA = 25°C unless otherwise noted. Channel-to-backside Thermal Resistance Tchannel Tc = 34°C as measured using infrared microscopy. Thermal Resistance at backside temperature Tb = 25°C calculated from measured data. Min. Typical Max. Unit AMMP-64xx Part Number Ordering Information Devices Per Container Container AMMP-6441-BLKG Antistatic bag AMMP-6441-TR1G 7” Reel AMMP-6441-TR2G 7” Reel Package Dimension, PCB Layout and Tape and Reel information Please refer to Avago Technologies Application Note 5520, AMxP-xxxx production Assembly Process Land Pattern A . Names and Contents of the Toxic and Hazardous Substances or Elements in the Products Part Name Toxic and Hazardous Substances or Elements Lead Pb 100pF capacitor Mercury Hg Cadmium Cd Hexavalent Cr VI Cr VI Polybrominated biphenyl PBB Polybrominated diphenylether PBDE PBDE indicates that the content of the toxic and hazardous substance in all the homogeneous materials of the part is below the concentration limit requirement as described in SJ/T indicates that the content of the toxic and hazardous substance in at least one homogeneous material of the part exceeds the concentration limit requirement as described in SJ/T The enterprise may further explain the technical reasons for the “x” indicated portion in the table in accordance with the actual situations. SJ/T 11363-2006 SJ/T 11363-2006 “x” Note EU RoHS compliant under exemption clause of “lead in electronic ceramic parts e.g. piezoelectronic devices ” For product information and a complete list of distributors, please go to our web site: Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright 2005-2011 Avago Technologies. All rights reserved. AV02-1908EN - June 21, 2011

PDF Datasheet Preview

AMMP-6441 36 - 40 GHz, 0.4W Power Amplifier in SMT Package

Data Sheet

The AMMP-6441 MMIC is a 0.4W power amplifier in a surface mount package designed for use in transmitters that operate at frequencies between 36GHz and 40GHz. In the operational band, it provides 26 dBm of output power P-1dB and 20dB of small-signal gain.
• LMDS & Pt-Pt mmW Long Haul
• Microwave Radio systems
• WLL and MMDS loops

Package Diagram
• 5x5mm SMT package
• watt output power
• 50 match on input and output

Typical Performance Vd=5V, Idsq=0.45A
• Frequency range 36 to 40 GHz
• Small signal Gain of 20dB
• Output power of 26dBm Typ.
• Input and Output return losses -10dB

Functional Block Diagram

Vg Vd1 Vd2

RF IN 8
4 RF OUT

Vg Vd1 Vd2

Note This MMIC uses depletion mode pHEMT devices.

Negative supply is used for DC gate biasing.
123 8

Pin Function
4 RF OUT

RF IN

RoHS-Exemption

Please refer to hazardous substances table on page

Attention Observe Precautions for handling electrostatic sensitive devices. ESD Machine Model Class A 40V ESD Human Body Model Class 0 150V Refer to Avago Application Note A004R Electrostatic Discharge Damage and Control.

Note MSL Rating = Level 2A

Electrical Specifications

Small/Large -signal data measured in a fully de-embedded test fixture form TA = 25°C. Pre-assembly into package performance verified 100% on-wafer per AMMC-6120 published specifications. This final package part performance is verified by a functional test correlated to actual performance at one or more
frequencies. Specifications are derived from measurements in a 50 Ω test environment. Aspects of the amplifier performance may
be improved over a more narrow bandwidth by application of additional conjugate, linearity, or low noise matching.

Table RF Electrical Characteristics TA=25°C, Vd=5.0V, Idq=0.45V, Vg=-1V, Zo=50 Ω

Parameter

Typ.

Unit

Operational Frequency, Freq

Small-signal Gain, Gain

Output Power at 1dB Gain Compression, P-1dB

Relative Third Order Inter-modulation level Po=+12dBm, SCL , IM3

Table Recommended Operating Range Ambient operational temperature TA = 25°C unless otherwise noted. Channel-to-backside Thermal Resistance Tchannel Tc = 34°C as measured using infrared microscopy. Thermal

Resistance at backside temperature Tb = 25°C calculated from measured data.

Min.

Typical

Max.

Unit
AMMP-64xx Part Number Ordering Information

Devices Per Container

Container

AMMP-6441-BLKG

Antistatic bag

AMMP-6441-TR1G
7” Reel

AMMP-6441-TR2G
7” Reel

Package Dimension, PCB Layout and Tape and Reel information

Please refer to Avago Technologies Application Note 5520, AMxP-xxxx production Assembly Process Land Pattern A .

Names and Contents of the Toxic and Hazardous Substances or Elements in the Products

Part Name

Toxic and Hazardous Substances or Elements

Lead Pb 100pF capacitor

Mercury Hg

Cadmium Cd

Hexavalent Cr VI

Cr VI

Polybrominated biphenyl PBB

Polybrominated diphenylether PBDE

PBDE
indicates that the content of the toxic and hazardous substance in all the homogeneous materials of the part is below the concentration limit requirement as described in SJ/T
indicates that the content of the toxic and hazardous substance in at least one homogeneous material of the part exceeds the concentration limit requirement as described in SJ/T The enterprise may further explain the technical reasons for the “x” indicated portion in the table in accordance with the actual situations.

SJ/T 11363-2006 SJ/T 11363-2006
“x”

Note EU RoHS compliant under exemption clause of “lead in electronic ceramic parts e.g. piezoelectronic devices ”

For product information and a complete list of distributors, please go to our web site:

Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright 2005-2011 Avago Technologies. All rights reserved. AV02-1908EN - June 21, 2011

More datasheets: TR-332 | TR-362 | TR-3710N-5 | TR-370 | ACC101 | 8952-3/4"X72YD | 8952-1"X72YD | 8952-2"X72YD | AMMP-6441-TR2G | AMMP-6441-BLKG

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AMMP-6441-TR1G Datasheet file may be downloaded here without warranties.

Datasheet ID: AMMP-6441-TR1G 520117