AMMC-6550-W50

AMMC-6550-W50 Datasheet

AMMC-6550 15 to 50 GHz Image Rejection Mixer

Part	Datasheet
AMMC-6550-W50	AMMC-6550-W50 (pdf)

Related Parts	Information
AMMC-6550-W10	AMMC-6550-W10

PDF Datasheet Preview
AMMC-6550 15 to 50 GHz Image Rejection Mixer Data Sheet Chip Size 1600 x 1300 63 x 51 mils Chip Size Tolerance ± 10 ± mils Chip Thickness 100 ± 10 4 ± mils Pad Dimensions 100 x 100 4 x 4 ± mils AMMC-6550 is an image rejection mixer IRM , which can also be used as an IQ mixer. The AMMC-6550 utilizes two distributed passive FET mixers and a Lange coupler realized in Avago Technologies unique gate length Enhancement mode PHEMT E-PHEMT technology. Although the AMMC-6550 works as a resistive mixer, the mixer can be biased with a positive DC voltage +0.4V Typ. . AMMC-6550 is designed for use in commercial digital radios and wireless LANs. The mixer requires an off-chip 90-degree hybrid to achieve signal image rejection and +0.4V Typ. DC bias. • Wide frequency range 15 - 50 GHz • Low conversion loss 10 dB Typ. • Image Rejection 15 dB Typ. • High Input IP3 +20dBm • Positive polarity for Gate and Drain Bias Schematic drain • Microwave Radio systems • Satellite VSAT, DBS Up/Down Link • LMDS & Pt-Pt mmW Long Haul • Broadband Wireless Access including and WiMax • WLL and MMDS loops gate Note These devices are ESD sensitive. The following precautions are strongly recommended. Ensure that an ESD approved carrier is used when units are transported from one destination to another. Personal grounding is to be worn at all times when handling these devices. The manufacturer assumes no responsibilities for ESD damage due to improper storage and handling of these devices. AMMC-6550 Maximum Ratings [1] Symbol Vg Pin Tch Tstg Tmax Parameters and Conditions Gate Supply Voltage CW Input Power IF and LO port Operating Channel Temperature Storage Case Temperature Max. Assembly Temp 60 sec. max Units V dBm °C °C °C Note Operation in excess of any one of these conditions may result in permanent damage to this device. Minimum Maximum 25 +150 +150 +300 AMMC-6550 DC Specifications/Physical Properties [1] Symbol Vg Ig Parameters and Test Conditions Gate Supply Operating Voltage Gate Supply Current under any RF power drive and temperature Note Ambient operational temperature Ta=25°C unless otherwise noted. Units Typical AMMC-6550 Typical performances TA= 25°C, Vg=+0.4 V, IF frequency=1GHz, Zo=50 Symbol FRF FLO FIF PLO CG RL_RF RL_LO RL_IF IR LO-RF Iso. LO-IF Iso. RF-IF Iso. IIP3 P-1 NF Parameters and Test Conditions RF Frequency Range LO Frequency Range IF Frequency Range Lo port pumping power RF to IF conversion gain RF Port Return Loss LO Port Return Loss IF Port Return Loss Image rejection ratio LO to RF port Isolation LO to IF port Isolation RF to IF port Isolation Input IP3, Fdelta=100MHz, Prf=-10dBm, Plo=15dBm Input port power at 1dB gin compression point, Plo=+15dBm Noise Figure Units GHz dBm dB dBm dB Typical 15 - 50 15 - 50 DC - 5 >10 -10 -10 -15 -10 15 20 15 20 +10 AMMC-6550 RF Specifications [2, 3, 6, 7] TA= 25°C, Vg=+0.4V, Plo=+10dBm, Zo=50 Symbol CG IR Parameters and Test Conditions Conversion Gain [4] Image Rejection Ratio [5] LO=17GHz LO=28GHz Ordering Information: AMMC-6550-W10 = 10 devices per tray AMMC-6550-W50 = 50 devices per tray For product information and a complete list of distributors, please go to our web site Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright 2005-2011 Avago Technologies. All rights reserved. Obsoletes AV01-0394EN AV02-1285EN - September 23, 2011

PDF Datasheet Preview

AMMC-6550 15 to 50 GHz Image Rejection Mixer

Data Sheet

Chip Size 1600 x 1300 63 x 51 mils Chip Size Tolerance ± 10 ± mils Chip Thickness 100 ± 10 4 ± mils Pad Dimensions 100 x 100 4 x 4 ± mils

AMMC-6550 is an image rejection mixer IRM , which can also be used as an IQ mixer. The AMMC-6550 utilizes two distributed passive FET mixers and a Lange coupler realized in Avago Technologies unique gate length Enhancement mode PHEMT E-PHEMT technology. Although the AMMC-6550 works as a resistive mixer, the mixer can be biased with a positive DC voltage +0.4V Typ. .

AMMC-6550 is designed for use in commercial digital radios and wireless LANs. The mixer requires an off-chip 90-degree hybrid to achieve signal image rejection and
+0.4V Typ. DC bias.
• Wide frequency range 15 - 50 GHz
• Low conversion loss 10 dB Typ.
• Image Rejection 15 dB Typ.
• High Input IP3 +20dBm
• Positive polarity for Gate and Drain Bias

Schematic
drain
• Microwave Radio systems
• Satellite VSAT, DBS Up/Down Link
• LMDS & Pt-Pt mmW Long Haul
• Broadband Wireless Access
including and WiMax
• WLL and MMDS loops
gate

Note These devices are ESD sensitive. The following precautions are strongly recommended. Ensure that an ESD approved carrier is used when units are transported from one destination to another. Personal grounding is to be worn at all times when handling these devices. The manufacturer assumes no responsibilities for ESD damage due to improper storage and handling of these devices.

AMMC-6550 Maximum Ratings [1]

Symbol Vg Pin Tch Tstg Tmax

Parameters and Conditions Gate Supply Voltage CW Input Power IF and LO port Operating Channel Temperature Storage Case Temperature Max. Assembly Temp 60 sec. max

Units V dBm °C °C °C

Note Operation in excess of any one of these conditions may result in permanent damage to this device.

Minimum

Maximum 25 +150 +150 +300

AMMC-6550 DC Specifications/Physical Properties [1]

Symbol Vg Ig

Parameters and Test Conditions Gate Supply Operating Voltage Gate Supply Current under any RF power drive and temperature

Note Ambient operational temperature Ta=25°C unless otherwise noted.

Units

Typical

AMMC-6550 Typical performances TA= 25°C, Vg=+0.4 V, IF frequency=1GHz, Zo=50

Symbol FRF FLO FIF PLO CG RL_RF RL_LO RL_IF IR LO-RF Iso. LO-IF Iso. RF-IF Iso. IIP3 P-1 NF

Parameters and Test Conditions RF Frequency Range LO Frequency Range IF Frequency Range Lo port pumping power RF to IF conversion gain RF Port Return Loss LO Port Return Loss IF Port Return Loss Image rejection ratio LO to RF port Isolation LO to IF port Isolation RF to IF port Isolation Input IP3, Fdelta=100MHz, Prf=-10dBm, Plo=15dBm Input port power at 1dB gin compression point, Plo=+15dBm Noise Figure

Units GHz dBm dB dBm dB

Typical 15 - 50 15 - 50 DC - 5 >10 -10 -10 -15 -10 15 20 15 20 +10

AMMC-6550 RF Specifications [2, 3, 6, 7] TA= 25°C, Vg=+0.4V, Plo=+10dBm, Zo=50

Symbol CG IR

Parameters and Test Conditions Conversion Gain [4]

Image Rejection Ratio [5]

LO=17GHz

LO=28GHz
Ordering Information:

AMMC-6550-W10 = 10 devices per tray AMMC-6550-W50 = 50 devices per tray

For product information and a complete list of distributors, please go to our web site Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright 2005-2011 Avago Technologies. All rights reserved. Obsoletes AV01-0394EN AV02-1285EN - September 23, 2011

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AMMC-6550-W50 Datasheet file may be downloaded here without warranties.

Datasheet ID: AMMC-6550-W50 520114