ALMD-CM3D-Y1002

ALMD-CM3D-Y1002 Datasheet

ALMD-EL3D, ALMD-EG3D, ALMD-CM3D, ALMD-CB3D High Brightness SMT Round LED Lamps Amber, Red, Green and Blue Tinted LEDs

Part	Datasheet
ALMD-CM3D-Y1002	ALMD-CM3D-Y1002 (pdf)

PDF Datasheet Preview
ALMD-EL3D, ALMD-EG3D, ALMD-CM3D, ALMD-CB3D High Brightness SMT Round LED Lamps Amber, Red, Green and Blue Tinted LEDs Data Sheet The new Avago ALMD-xx3D LED series has the same or just slightly less luminous intensity than conventional high brightness, through-hole LEDs. The new LED lamps can be assembled using common SMT assembly processes and are compatible with industrial reflow soldering processes. The LEDs are made with an advanced optical grade epoxy for superior performance in outdoor sign applications. For easy pick and place assembly, the LEDs are shipped in EIA-compliant tape and reel. Every reel is shipped from a single intensity and color except the red better uniformity. Package Dimensions Package Marking A Anode C Cathode Compact form factor High brightness material Available in Red, Amber, Green and Blue color Red AlInGaP 626 nm Amber AlInGaP 590 nm Green InGaN 525 nm Blue InGaN 470 nm JEDEC MSL 2A Compatible with industrial reflow soldering process Typical Viewing angle 30q Tinted, non-diffused Variable Message Signs All dimensions in millimeters inches . Tolerance is ± mm unless other specified. Copper leadframe. CAUTION InGaN devices are Class 1C HBM ESD sensitive, AlInGaP devices are Class 1B ESD sensitive per JEDEC Standard. Please observe appropriate precautions during handling and processing. Refer to Application Note AN-1142 for additional details. CAUTION Customer is advised to keep the LED in the MBB when not in use as prolonged exposure to environment might cause the silver plated leads to tarnish, which might cause difficulties in soldering. Device Selection Guide Part Number ALMD-EG3D-VX002 Color and Dominant Wavelength Od nm Typ [3] Red 626 Luminous Intensity Iv mcd [1,2,5] 4200 9300 Viewing Angle Typ ° [4] ALMD-EL3D-VX002 Amber 590 4200 9300 ALMD-CM3D-Y1002 Green 525 9300 21000 ALMD-CB3D-SU002 Blue 470 1900 4200 The luminous intensity is measured on the mechanical axis of the lamp package and it is tested with pulsing condition. The optical axis is closely aligned with the package mechanical axis. Dominant wavelength, Od, is derived from the CIE Chromaticity Diagram and represents the color of the lamp. is the off-axis angle where the luminous intensity is half the on-axis intensity. Tolerance for each bin limit is ± 15% Part Numbering System A L M D - x1 x2 x3 x4 - x5 x6 x7 x8 x9 Code Description

PDF Datasheet Preview

ALMD-EL3D, ALMD-EG3D, ALMD-CM3D, ALMD-CB3D High Brightness SMT Round LED Lamps Amber, Red, Green and Blue Tinted LEDs

Data Sheet

The new Avago ALMD-xx3D LED series has the same or just slightly less luminous intensity than conventional high brightness, through-hole LEDs.

The new LED lamps can be assembled using common SMT assembly processes and are compatible with industrial reflow soldering processes.

The LEDs are made with an advanced optical grade epoxy for superior performance in outdoor sign applications.

For easy pick and place assembly, the LEDs are shipped in EIA-compliant tape and reel. Every reel is shipped from a single intensity and color except the red better uniformity.

Package Dimensions

Package Marking

A Anode C Cathode

Compact form factor High brightness material Available in Red, Amber, Green and Blue color Red AlInGaP 626 nm Amber AlInGaP 590 nm Green InGaN 525 nm Blue InGaN 470 nm JEDEC MSL 2A Compatible with industrial reflow soldering process Typical Viewing angle 30q Tinted, non-diffused

Variable Message Signs

All dimensions in millimeters inches .

Tolerance is ± mm unless other specified.

Copper leadframe.

CAUTION InGaN devices are Class 1C HBM ESD sensitive, AlInGaP devices are Class 1B ESD sensitive per JEDEC Standard. Please observe appropriate precautions during handling and processing. Refer to Application Note AN-1142 for additional details.

CAUTION Customer is advised to keep the LED in the MBB when not in use as prolonged exposure to environment might cause the silver plated leads to tarnish, which might cause difficulties in soldering.

Device Selection Guide

Part Number ALMD-EG3D-VX002

Color and Dominant Wavelength Od nm Typ [3]

Red 626

Luminous Intensity Iv mcd [1,2,5]
4200
9300

Viewing Angle Typ ° [4]

ALMD-EL3D-VX002

Amber 590
4200
9300

ALMD-CM3D-Y1002

Green 525
9300
21000

ALMD-CB3D-SU002

Blue 470
1900
4200

The luminous intensity is measured on the mechanical axis of the lamp package and it is tested with pulsing condition.

The optical axis is closely aligned with the package mechanical axis. Dominant wavelength, Od, is derived from the CIE Chromaticity Diagram and represents the color of the lamp. is the off-axis angle where the luminous intensity is half the on-axis intensity. Tolerance for each bin limit is ± 15%

Part Numbering System

A L M D - x1 x2 x3 x4 - x5 x6 x7 x8 x9

Code Description

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ALMD-CM3D-Y1002 Datasheet file may be downloaded here without warranties.

Datasheet ID: ALMD-CM3D-Y1002 520097