ALMD-CM3F,ALMD-CB3F High Brightness SMT Round Green & Blue LED Lamps
Part | Datasheet |
---|---|
![]() |
ALMD-CM3F-Y1002 (pdf) |
Related Parts | Information |
---|---|
![]() |
ALMD-CB3F-TV002 |
PDF Datasheet Preview |
---|
ALMD-CM3F,ALMD-CB3F High Brightness SMT Round Green & Blue LED Lamps Data Sheet The new Avago ALMD-xx3F LED series has the same or just slightly less luminous intensity than conventional high brightness, through-hole LEDs. The new LED lamps can be assembled using common SMT assembly processes and are compatible with industrial reflow soldering processes. The LEDs are made with an advanced optical grade epoxy for superior performance in outdoor sign applications For easy pick and place assembly, the LEDs are shipped in tape and reel. Every reel is shipped from a single intensity and color bin for better uniformity Package Dimensions Package Marking • Compact form factor • High brightness material • Available in Green and Blue Color • Green InGaN 525nm • Blue InGaN 470nm • Jedec MSL 2A • Compatible with reflow soldering process • Tinted lens • Typical viewing angle 30° • Mono color signs A Anode C Cathode Notes All dimensions in millimeters inches . Tolerance is ± mm, unless otherwise specified. Mildsteel leadframe. CAUTION InGaN devices are Class 1C HBM ESD sensitive, AlInGaP devices are Class 1B ESD sensitive per JEDEC Standard. Please observe appropriate precautions during handling and processing. Refer to Application Note AN-1142 for additional details. CAUTION Customer is advised to always keep the LED in the MBB with <5% RH when not in use as prolonged exposure to environment might cause the silver-plated leads to tarnish or rust, which might cause difficulties in soldering. Device Selection Guide Part Number ALMD-CM3F-Y1002 Color and Dominant Wavelength λd nm Typ. [3] Green 525 Luminous Intensity Iv mcd [1,2,5] Min. Max. 9300 21000 Viewing Angle Typ. ° [4] 30° ALMD-CB3F-TV002 Blue 470 2500 5500 30° Notes The luminous intensity is measured on the mechanical axis of the lamp package and it is tested with pulsing condition. The optical axis is closely aligned with the package mechanical axis. Dominant wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the color of the lamp. is the off-axis angle where the luminous intensity is half the on-axis intensity. Tolerance for each bin limit is ± Part Numbering System A L M D - x1 x2 x3 x4 - x5 x6 x7 x8 x9 Code Description Package type Color Viewing angle Product specific designation Minimum intensity bin Maximum intensity bin Color bin selection |
More datasheets: PVDIS-T101-DC1000V-30A | PTS645SH95TR | 20317 | 17703 | 17000181A | C3FSE7 | 10220-M218VE | 10250-M218VE | 10268-M218VE | 102A0-M218VE |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ALMD-CM3F-Y1002 Datasheet file may be downloaded here without warranties.