AFCT-5765APZ

AFCT-5765APZ Datasheet

AFCT-5760Z and AFCT-5765Z Families of Small Form Factor Pluggable SFP Optical Transceivers for Single-Mode OC3/STM-1 with Optional DMI Part of the Avago Technologies METRAK Family

Part	Datasheet
AFCT-5765APZ	AFCT-5765APZ (pdf)

PDF Datasheet Preview
AFCT-5760Z and AFCT-5765Z Families of Small Form Factor Pluggable SFP Optical Transceivers for Single-Mode OC3/STM-1 with Optional DMI Part of the Avago Technologies METRAK Family Data Sheet The AFCT-576xZ family of SFP optical transceivers for OC3 offers the customer a range of design options, including optional DMI further described later , extended or industrial temperature ranges, and standard push-button or bail delatch. The AFCT-5765Z family targets applications requiring DMI features, and the AFCT-5760Z family is streamlined for those applications where DMI features are not needed. Throughout this document, AFCT-576xZ will refer collectively to the entire product family encompassing this range of product features. Part Number Options The AFCT-576xZ family consists of the following products: With DMI Temperature AFCT-5765LZ Extended* AFCT-5765PZ Extended* AFCT-5765ALZ Industrial* AFCT-5765APZ Industrial* AFCT-5765TLZ Extended* AFCT-5765TPZ Extended* AFCT-5765ATLZ Industrial* AFCT-5765ATPZ Industrial* Design Standard Bail Standard Bail Standard Bail Standard Bail Distance SR 2km SR IR 15km IR Without DMI Temperature Design AFCT-5760LZ Extended* Standard AFCT-5760PZ Extended* Bail AFCT-5760ALZ Industrial* Standard AFCT-5760APZ Industrial* Bail AFCT-5760TLZ Extended* Standard AFCT-5760TPZ Extended* Bail AFCT-5760ATLZ Industrial* Standard AFCT-5760ATPZ Industrial* Bail * Extended Temperature Range is -10 to 85 degrees C Industrial Temperature Range is -40 to 85 degrees C Distance SR 2km SR IR 15km IR • ROHS compliant • Optional Digital Diagnostic Monitoring available - AFCT-5760Z family without DMI - AFCT-5765Z family with DMI • Per SFF-8472, diagnostic features on AFCT-5765Z family enable Diagnostic Monitoring Interface for optical transceivers with real-time monitoring of: - Transmitted optical power - Received optical power - Laser bias current - Temperature - Supply voltage An Evaluation Kit and Reference Designs are available to assist in evaluation of the AFCT-576xZ SFPs. Please contact your local Field Sales representative for availability and ordering details. SFP MODULE HOST BOARD Figure MSA required power supply filter Operating Temperature The AFCT-576xZ family is available in either Extended -10 to +85°C or Industrial -40 to +85°C temperature ranges. Power Supply Noise The AFCT-576xZ can withstand an injection of PSN on the VCC lines of 100 mV ac without a degradation in eye mask margin to 10% on the transmitter and a 1 dB sensitivity penalty on the receiver. This occurs when the product is used in conjunction with the MSA recommended power supply filter shown in Figure Regulatory Compliance The transceiver regulatory compliance is provided in Table 1 as a figure of merit to assist the designer. The overall equipment design will determine the certification level. Table Regulatory Compliance Electrostatic Discharge ESD to the Electrical Pins Electrostatic Discharge ESD to the Duplex LC Receptacle Test Method MIL-STD-883C Method JEDEC/EIA JESD22-A114-A Bellcore GR1089-CORE Electromagnetic Interference FCC Class B EMI Immunity Variation of IEC 61000-4-3 Eye Safety Component Recognition ROHS Compliance US FDA CDRH AEL Class 1 EN IEC 60825-1, 2, EN60950 Class 1 Underwriter’s Laboratories and Canadian Standards Association Joint Component Recognition for Information Technology Equipment Including Electrical Business Equipment Performance Class 2 2000 Volts 25 kV Air Discharge 10 Zaps at 8 kV contact discharge on the electrical faceplate on panel. Applications with high SFP port counts are expected to be compliant however, margins are dependent on customer board and chassis design. No measurable effect from a 10 V/m field swept from 80 to 1000 MHz applied to the transceiver without a chassis enclosure. CDRH Accession Number 9521220-137 TUV Certificate Number 933/21205741/040 UL file # E173874 Reference to EU RoHS Directive 2002/95/EC Electrostatic Discharge ESD There are two conditions in which immunity to ESD damage is important: The first condition is static discharge to the transceiver during handling such as when the transceiver is inserted into the transceiver port. To protect the transceiver, it is important to use normal ESD handling precautions including the use of grounded wrist straps, work benches, and floor mats in ESD controlled areas. The ESD sensitivity of the AFCT-576xZ is compatible with typical industry production environments. The second condition is static discharge to the exterior of the host equipment chassis after installation. To the extent that the duplex LC optical interface is exposed to the outside of the host equipment chassis, it may be subject to system-level ESD requirements. The ESD performance of the AFCT-576xZ exceeds typical industry standards. Table 1 documents ESD immunity to both of these conditions. Electromagnetic Interference EMI Most equipment designs using the AFCT-576xZ SFPs are subject to the requirements of the FCC in the United States, CENELEC EN55022 CISPR 22 in Europe and VCCI in Japan. The metal housing and shielded design of the transceiver minimize EMI and provide excellent EMI performance. EMI Immunity The AFCT-576xZ transceivers have a shielded design to provide excellent immunity to radio frequency electromagnetic fields which may be present in some operating environments. Eye Safety The AFCT-576xZ transceivers provide Class 1 eye safety by design. Avago Technologies has tested the transceiver design for regulatory compliance, under normal operating conditions and under a single fault condition. See Table Flammability The AFCT-576xZ family of SFPs is compliant to UL 94V-0. Customer Manufacturing Processes This module is pluggable and is not designed for aqueous wash, IR reflow, or wave soldering processes. Ordering Information Please contact your local field sales engineer or one of Avago Technologies franchised distributors for ordering information. For technical information, please visit Avago Technologies’ web-page at or contact one of Avago Technologies’ regional Technical Response Centers. For information related to SFF Committee documentation, visit 1300nm FP Laser Operating Case Temperature -10 to +85 °C With DMI AFCT-5765LZ SR standard de-latch 2 km AFCT-5765PZ SR bail de-latch 2 km AFCT-5765TLZ IR standard de-latch 15 km AFCT-5765TPZ IR bail de-latch 15 km Without DMI AFCT-5760LZ SR standard de-latch 2 km AFCT-5760PZ SR bail de-latch 2 km AFCT-5760TLZ IR standard de-latch 15 km AFCT-5760TPZ IR bail de-latch 15 km 1300nm FP Laser Operating Case Temperature -40 to +85 °C With DMI AFCT-5765ALZ SR standard de-latch 2 km AFCT-5765APZ SR bail de-latch 2 km AFCT-5765ATLZ IR standard de-latch 15 km AFCT-5765ATPZ IR bail de-latch 15 km Without DMI AFCT-5760ALZ SR standard de-latch 2 km AFCT-5760APZ SR bail de-latch 2 km AFCT-5760ATLZ IR standard de-latch 15 km AFCT-5760ATPZ IR bail de-latch 15 km EEPROM Content and / or Label Options AFCT-5760XXXX-YYY AFCT-5765XXXX-YYY Where “XXXX” refers to product option “YYY” is customer specific For product information and a complete list of distributors, please go to our web site Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright 2005-2012 Avago Technologies. All rights reserved. Obsoletes AV01-0510EN AV02-0136EN - September 12, 2012

PDF Datasheet Preview

AFCT-5760Z and AFCT-5765Z Families of Small Form Factor Pluggable SFP Optical Transceivers for Single-Mode OC3/STM-1 with Optional DMI Part of the Avago Technologies METRAK Family

Data Sheet

The AFCT-576xZ family of SFP optical transceivers for OC3 offers the customer a range of design options, including optional DMI further described later , extended or industrial temperature ranges, and standard push-button or bail delatch. The AFCT-5765Z family targets applications requiring DMI features, and the AFCT-5760Z family is streamlined for those applications where DMI features are not needed. Throughout this document, AFCT-576xZ will refer collectively to the entire product family encompassing this range of product features.

Part Number Options

The AFCT-576xZ family consists of the following products:

With DMI

Temperature

AFCT-5765LZ Extended*

AFCT-5765PZ Extended*

AFCT-5765ALZ Industrial*

AFCT-5765APZ Industrial*

AFCT-5765TLZ Extended*

AFCT-5765TPZ Extended*

AFCT-5765ATLZ Industrial*

AFCT-5765ATPZ Industrial*

Design Standard Bail Standard Bail Standard Bail Standard Bail

Distance SR 2km SR IR 15km IR

Without DMI

Temperature Design

AFCT-5760LZ Extended* Standard

AFCT-5760PZ Extended* Bail

AFCT-5760ALZ Industrial* Standard

AFCT-5760APZ Industrial* Bail

AFCT-5760TLZ Extended* Standard

AFCT-5760TPZ Extended* Bail

AFCT-5760ATLZ Industrial* Standard

AFCT-5760ATPZ Industrial* Bail
* Extended Temperature Range is -10 to 85 degrees C

Industrial Temperature Range is -40 to 85 degrees C

Distance SR 2km SR IR 15km IR
• ROHS compliant
• Optional Digital Diagnostic Monitoring available
- AFCT-5760Z family without DMI
- AFCT-5765Z family with DMI
• Per SFF-8472, diagnostic features on AFCT-5765Z
family enable Diagnostic Monitoring Interface for
optical transceivers with real-time monitoring of:
- Transmitted optical power
- Received optical power
- Laser bias current
- Temperature
- Supply voltage
An Evaluation Kit and Reference Designs are available to assist in evaluation of the AFCT-576xZ SFPs. Please contact your local Field Sales representative for availability and ordering details.

SFP MODULE

HOST BOARD

Figure MSA required power supply filter

Operating Temperature

The AFCT-576xZ family is available in either Extended -10 to +85°C or Industrial -40 to +85°C temperature ranges.

Power Supply Noise

The AFCT-576xZ can withstand an injection of PSN on the VCC lines of 100 mV ac without a degradation in eye mask margin to 10% on the transmitter and a 1 dB sensitivity penalty on the receiver. This occurs when the product is used in conjunction with the MSA recommended power supply filter shown in Figure

Regulatory Compliance

The transceiver regulatory compliance is provided in Table 1 as a figure of merit to assist the designer. The overall equipment design will determine the certification level.

Table Regulatory Compliance

Electrostatic Discharge ESD to the Electrical Pins

Electrostatic Discharge ESD to the Duplex LC Receptacle

Test Method

MIL-STD-883C Method JEDEC/EIA JESD22-A114-A

Bellcore GR1089-CORE

Electromagnetic Interference FCC Class B EMI

Immunity

Variation of IEC 61000-4-3

Eye Safety Component Recognition

ROHS Compliance

US FDA CDRH AEL Class 1 EN IEC 60825-1, 2, EN60950 Class 1

Underwriter’s Laboratories and Canadian Standards Association Joint Component Recognition for Information Technology Equipment Including Electrical Business Equipment

Performance Class 2 2000 Volts
25 kV Air Discharge 10 Zaps at 8 kV contact discharge on the electrical faceplate on panel. Applications with high SFP port counts are expected to be compliant however, margins are dependent on customer board and chassis design. No measurable effect from a 10 V/m field swept from 80 to 1000 MHz applied to the transceiver without a chassis enclosure. CDRH Accession Number 9521220-137 TUV Certificate Number 933/21205741/040

UL file # E173874

Reference to EU RoHS Directive 2002/95/EC

Electrostatic Discharge ESD

There are two conditions in which immunity to ESD damage is important:

The first condition is static discharge to the transceiver during handling such as when the transceiver is inserted into the transceiver port. To protect the transceiver, it is important to use normal ESD handling precautions including the use of grounded wrist straps, work benches, and floor mats in ESD controlled areas. The ESD sensitivity of the AFCT-576xZ is compatible with typical industry production environments.

The second condition is static discharge to the exterior of the host equipment chassis after installation. To the extent that the duplex LC optical interface is exposed to the outside of the host equipment chassis, it may be subject to system-level ESD requirements. The ESD performance of the AFCT-576xZ exceeds typical industry standards. Table 1 documents ESD immunity to both of these conditions.

Electromagnetic Interference EMI

Most equipment designs using the AFCT-576xZ SFPs are subject to the requirements of the FCC in the United States, CENELEC EN55022 CISPR 22 in Europe and VCCI in Japan. The metal housing and shielded design of the transceiver minimize EMI and provide excellent EMI performance.

EMI Immunity

The AFCT-576xZ transceivers have a shielded design to provide excellent immunity to radio frequency electromagnetic fields which may be present in some operating environments.

Eye Safety

The AFCT-576xZ transceivers provide Class 1 eye safety by design. Avago Technologies has tested the transceiver design for regulatory compliance, under normal operating conditions and under a single fault condition. See Table

Flammability

The AFCT-576xZ family of SFPs is compliant to UL 94V-0.

Customer Manufacturing Processes

This module is pluggable and is not designed for aqueous wash, IR reflow, or wave soldering processes.
Ordering Information
Please contact your local field sales engineer or one of Avago Technologies franchised distributors for ordering information. For technical information, please visit Avago Technologies’ web-page at or contact one of Avago Technologies’ regional Technical Response Centers. For information related to SFF Committee documentation, visit
1300nm FP Laser Operating Case Temperature -10 to +85 °C

With DMI AFCT-5765LZ SR standard de-latch 2 km AFCT-5765PZ SR bail de-latch 2 km AFCT-5765TLZ IR standard de-latch 15 km AFCT-5765TPZ IR bail de-latch 15 km

Without DMI AFCT-5760LZ SR standard de-latch 2 km AFCT-5760PZ SR bail de-latch 2 km AFCT-5760TLZ IR standard de-latch 15 km AFCT-5760TPZ IR bail de-latch 15 km
1300nm FP Laser Operating Case Temperature -40 to +85 °C

With DMI AFCT-5765ALZ SR standard de-latch 2 km AFCT-5765APZ SR bail de-latch 2 km AFCT-5765ATLZ IR standard de-latch 15 km AFCT-5765ATPZ IR bail de-latch 15 km

Without DMI AFCT-5760ALZ SR standard de-latch 2 km AFCT-5760APZ SR bail de-latch 2 km AFCT-5760ATLZ IR standard de-latch 15 km AFCT-5760ATPZ IR bail de-latch 15 km

EEPROM Content and / or Label Options

AFCT-5760XXXX-YYY AFCT-5765XXXX-YYY Where “XXXX” refers to product option
“YYY” is customer specific

For product information and a complete list of distributors, please go to our web site Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright 2005-2012 Avago Technologies. All rights reserved. Obsoletes AV01-0510EN AV02-0136EN - September 12, 2012

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AFCT-5765APZ Datasheet file may be downloaded here without warranties.

Datasheet ID: AFCT-5765APZ 520059