HEDS-8934

HEDS-8934 Datasheet


Notes Time between falling edge of CSn and data output activated Time between falling edge of CSn and first falling edge of CLK Rising edge of CLK shifts out one bit a time between rising edge of CLK and data output valid After the last bit DO changes back to “tristate” CSn=high To initiate read-out of next angular position Internal sampling rate. Until internal compensation finished

Part Datasheet
HEDS-8934 HEDS-8934 HEDS-8934 (pdf)
Related Parts Information
AEAT-6010-A06 AEAT-6010-A06 AEAT-6010-A06
AEAT-6012-A06 AEAT-6012-A06 AEAT-6012-A06
PDF Datasheet Preview
AEAT-6010/6012 Magnetic Encoder 10 or 12 bit Angular Detection Device

Data Sheet
• 10 or 12 bits resolution
• Contactless sensing technologies
• Wide temperature range from -40° to 125°C
• Absolute angular position detection
• Synchronous serial interface SSI output for absolute
position data binary format
• Code monotony error = ± 1 LSB
• 5V supply
• Easy Assembly, No Signal Adjustment required
• RoHS compliant

Exploded View

Magnetic Encoder

Magnet Snap Ring Motor
• Flow meter

Plastic Housing
• Angular detection
• Knob control
• Rotary encoder

Sensor PCB Assembly

Plastic Hub

Plastic Base Plate
2 x screws

Note “This product is not specifically designed or manufactured for use in any specific device. Customers are solely responsible for determining the suitability of this product for its intended application and solely liable for all loss, damage, expense or liability in connection with such use.”

Device Selection Guide [1]

Part Number AEAT-6012-A06 AEAT-6010-A06

Resolution bit 12 10

Operating Temperature °C -40 to +125 -40 to +125

Notes For other options of Magnetic Encoder, please refer to factory.

Output Communication Serial

DC Supply Voltage V , VDD

Table Absolute Maximum Ratings [2, 3]

Parameter DC Supply Voltage at pin VDD = 5V Input Voltage Storage Temperature

Symbol VDD Vi TSTG

Limits

Units
to + 7
to VDD+0.3 V
-40 to 125

Notes

Notes Stresses greater than those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is stress rating only and
functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability.

Table Recommended Operating Condition

Parameter DC Supply Voltage at pin VDD = 5V Ambient Temperature Maximum Read-out Frequency

Symbol VDD Tamb fCLK

Values

Units
to +125

Notes >0 MHz
Ordering Information

AEAT - 601 -
0 - 5V
1 - Kit Encoder 0 - 10 bits 2 - 12 bits

A - Serial Output 06 - 6mm

For product information and a complete list of distributors, please go to our web site:

Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright 2005-2011 Avago Technologies. All rights reserved. AV02-0188EN - August 12, 2011
More datasheets: CY7C1420BV18-250BZC | CY7C1420BV18-200BZC | CY7C1418BV18-250BZI | CY7C1418BV18-167BZC | CY7C1418BV18-267BZXC | CY7C1420BV18-200BZCT | DFR0107 | G844700PUCUS2 | CRD1601-120W-Z | MSA-9970


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived HEDS-8934 Datasheet file may be downloaded here without warranties.

Datasheet ID: HEDS-8934 520019