ADNS-7100-001

ADNS-7100-001 Datasheet

ADNS-7100-001 Trim Lens

Part	Datasheet
ADNS-7100-001	ADNS-7100-001 (pdf)

PDF Datasheet Preview
ADNS-7100-001 Trim Lens Data Sheet The ADNS-7100-001 laser mouse trim lens is designed for use with Avago Technologies ADNS-7630 one chip Bluetooth LaserStreamTM sensors. Together with the VCSEL, the ADNS-7100-001 trim lens provides the directed illumination and optical imaging necessary for proper operation of the sensor. ADNS-7100-001 trim lens is a precision molded optical component and should be handled with care to avoid scratching of the optical surfaces. Figure ADNS-7100-001 trim lens outline drawings and details Notes Dimensions in millimeters/inches Dimensional tolerance ±0.10mm Angular tolerance ±3° Maximum flash 0.20mm reference dimension Mechanical Assembly Requirements All specifications reference Figure 2, Optical System Assembly Diagram Parameters Distance from Object Surface to Lens Reference Plane Distance from Object Surface to Sensor Pin Reference Plane Symbol A Minimum Typical Maximum Units Conditions For ADNS-7100-001 with ADNS-7630 sensor Sensor Pin Reference Plane must be in contact with Lens Housing Surface ADNS-7630 sensor Tracking Surface Figure Optical system assembly cross-section diagram ADNS-7100-001 trim lens Figure Avago Technologies logo location 2 Lens Design Optical Performance Specifications All specifications are based on the Mechanical Assembly Requirements. Parameters Symbol Min. Typical Max. Units Conditions Design Wavelength Lens Material* Index of Refraction N λ = 842 nm *Lens material is polycarbonate. Cyanoacrylate based adhesives should not be used as they will cause lens material deformation. Mounting Instructions for the ADNS-7100-001 Laser Mouse Trim Lens to the Base Plate An STEP or IGES format drawing file with design specifications for laser mouse base plate features is available. These features are useful in maintaining proper positioning and alignment of the ADNS-7100-001 trim lens when used with the Avago Technologies ADNS-7630 one chip Bluetooth LaserStreamTM sensor. This file can be obtained by contacting your local Avago Technologies sales representative. ADNS-7100-001 trim lens Figure Illustration of base plate mounting features for ADNS-7100-001 trim lens Customer Supplied Base Plate For product information and a complete list of distributors, please go to our web site: Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright 2005-2010 Avago Technologies. All rights reserved. AV02-0688EN - June 4, 2010

PDF Datasheet Preview

ADNS-7100-001 Trim Lens

Data Sheet

The ADNS-7100-001 laser mouse trim lens is designed for use with Avago Technologies ADNS-7630 one chip Bluetooth LaserStreamTM sensors. Together with the VCSEL, the ADNS-7100-001 trim lens provides the directed illumination and optical imaging necessary for
proper operation of the sensor. ADNS-7100-001 trim lens is a precision molded optical component and should be handled with care to avoid scratching of the optical surfaces.

Figure ADNS-7100-001 trim lens outline drawings and details

Notes Dimensions in millimeters/inches Dimensional tolerance ±0.10mm Angular tolerance ±3° Maximum flash 0.20mm reference dimension

Mechanical Assembly Requirements All specifications reference Figure 2, Optical System Assembly Diagram

Parameters Distance from Object Surface to Lens Reference Plane

Distance from Object Surface to Sensor Pin Reference Plane

Symbol A

Minimum

Typical

Maximum Units

Conditions For ADNS-7100-001 with ADNS-7630 sensor

Sensor Pin Reference Plane must be in contact with Lens Housing Surface

ADNS-7630 sensor

Tracking Surface Figure Optical system assembly cross-section diagram

ADNS-7100-001 trim lens

Figure Avago Technologies logo location 2

Lens Design Optical Performance Specifications All specifications are based on the Mechanical Assembly Requirements.

Parameters

Symbol Min. Typical Max. Units Conditions

Design Wavelength

Lens Material* Index of Refraction N
λ = 842 nm
*Lens material is polycarbonate. Cyanoacrylate based adhesives should not be used as they will cause lens material deformation.

Mounting Instructions for the ADNS-7100-001 Laser Mouse Trim Lens to the Base Plate

An STEP or IGES format drawing file with design specifications for laser mouse base plate features is available. These features are useful in maintaining proper positioning and alignment of the ADNS-7100-001 trim lens when used with the Avago Technologies ADNS-7630 one chip Bluetooth LaserStreamTM sensor. This file can be obtained by contacting your local Avago Technologies sales representative.

ADNS-7100-001 trim lens

Figure Illustration of base plate mounting features for ADNS-7100-001 trim lens

Customer Supplied Base Plate

For product information and a complete list of distributors, please go to our web site:

Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright 2005-2010 Avago Technologies. All rights reserved. AV02-0688EN - June 4, 2010

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ADNS-7100-001 Datasheet file may be downloaded here without warranties.

Datasheet ID: ADNS-7100-001 520007