ADNS-6160-001

ADNS-6160-001 Datasheet

ADNS-6160-001 Small Form Factor Trim Lens

Part	Datasheet
ADNS-6160-001	ADNS-6160-001 (pdf)

PDF Datasheet Preview
ADNS-6160-001 Small Form Factor Trim Lens Data Sheet The ADNS-6160-001 laser mouse SFF trim lens is designed for use with Avago Technologies ADNS-7530 and ADNS-7550 integrated molded lead-frame DIP LaserStream sensors. Together with the VCSEL, the ADNS6160-001 SFF trim lens provides the directed illumination and optical imaging necessary for proper operation of the sensor. ADNS-6160-001 SFF trim lens is a precision molded optical component and should be handled with care to avoid scratching of the optical surfaces. 4X lens seating surfaces Reference surface above base Section C-C 30º 30º Guide post A Lens surface 1 Illumination lens Lens surface 2 Notes Dimensions in millimeters/inches. Navigation surface Lens surface 3 Imaging lens Dimensional tolerance ±0.10mm Lens surface 4 Angular tolerance ±3° Maximum flash ±0.20mm Section B-B reference dimension Figure ADNS-6160-001 SFF trim lens outline drawings and details Mechanical Assembly Requirements All specifications reference Figure 2, Optical System Assembly Diagram Parameters Symbol Minimum Typical Maximum Units Distance from Object Surface to Lens A Reference Plane Distance from Object Surface to Sensor Pin B Reference Plane ADNS-7550 or ADNS-7530 sensor Conditions For ADNS-6160-001 with ADNS-7550 and ADNS-7530 sensors Sensor Pin Reference Plane must be in contact with Lens Housing Surface ADNS-6160-001 Object Surface Figure Optical system assembly cross-section diagram Figure Avago Technologies logo location Lens Design Optical Performance Specifications All specifications are based on the Mechanical Assembly Requirements. Parameters Symbol Min. Typical Max. Units Conditions Design Wavelength

PDF Datasheet Preview

ADNS-6160-001 Small Form Factor Trim Lens

Data Sheet

The ADNS-6160-001 laser mouse SFF trim lens is designed for use with Avago Technologies ADNS-7530 and ADNS-7550 integrated molded lead-frame DIP LaserStream sensors. Together with the VCSEL, the ADNS6160-001 SFF trim lens provides the directed illumination
and optical imaging necessary for proper operation of the sensor. ADNS-6160-001 SFF trim lens is a precision molded optical component and should be handled with care to avoid scratching of the optical surfaces.
4X lens seating surfaces

Reference surface
above base

Section C-C
30º
30º

Guide post A

Lens surface 1 Illumination lens

Lens surface 2

Notes Dimensions in millimeters/inches.

Navigation surface Lens surface 3

Imaging lens

Dimensional tolerance ±0.10mm

Lens surface 4

Angular tolerance ±3° Maximum flash ±0.20mm

Section B-B
reference dimension

Figure ADNS-6160-001 SFF trim lens outline drawings and details

Mechanical Assembly Requirements

All specifications reference Figure 2, Optical System Assembly Diagram

Parameters

Symbol Minimum Typical Maximum Units

Distance from Object Surface to Lens A

Reference Plane

Distance from Object Surface to Sensor Pin B Reference Plane

ADNS-7550 or ADNS-7530 sensor

Conditions

For ADNS-6160-001 with ADNS-7550 and ADNS-7530 sensors

Sensor Pin Reference Plane must be in contact with Lens Housing Surface

ADNS-6160-001

Object Surface

Figure Optical system assembly cross-section diagram

Figure Avago Technologies logo location

Lens Design Optical Performance Specifications All specifications are based on the Mechanical Assembly Requirements.

Parameters

Symbol Min. Typical Max. Units Conditions

Design Wavelength

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ADNS-6160-001 Datasheet file may be downloaded here without warranties.

Datasheet ID: ADNS-6160-001 519997